Request 117 (accepted)

atmos.changes Changed

atmos.spec Changed

atmos-2.97.9.tar.gz/INSTALL -> atmos-2.97.11.tar.gz/INSTALL Changed

@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
+   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@
 Basic Installation
 ==================
 
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
+   Briefly, the shell command './configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the 'README' file for
 instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The `configure' shell script attempts to guess correct values for
+   The 'configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
 you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
 
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
 
    The simplest way to compile this package is:
 
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.
 
-     Running `configure' might take a while.  While running, it prints
+     Running 'configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type `make' to compile the package.
+  2. Type 'make' to compile the package.
 
-  3. Optionally, type `make check' to run any self-tests that come with
+  3. Optionally, type 'make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type `make install' to install the programs and any data files and
+  4. Type 'make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
+     user, and only the 'make install' phase executed with root
      privileges.
 
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
+     regular user, particularly if the prior 'make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type `make uninstall' to remove the installed
+  7. Often, you can also type 'make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide `make
+  8. Some packages, particularly those that use Automake, provide 'make
      distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
+     targets like 'make install' and 'make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
+the 'configure' script does not know about.  Run './configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -113,21 +112,21 @@
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
 directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.
 
-   With a non-GNU `make', it is safer to compile the package for one
+   With a non-GNU 'make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, `make install
+affected directory.  For example, 'make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
 
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, `configure' can usually
+   For packages that use the X Window System, 'configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
+execution of 'make' will be.  For these packages, running './configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
+   HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.
 
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try
 
      ./configure CC="cc"
 
@@ -242,26 +240,26 @@
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
 
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
+   There may be some features 'configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -270,101 +268,101 @@
      OS
      KERNEL-OS
 
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
+environment passed to 'configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
+them in the 'configure' command line, using 'VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
 
      CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-`configure' Invocation
+'configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
+   'configure' recognizes the following options to control how it
 operates.
 
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.
 
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
      Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.
+
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
      script, and exit.
 
-`--cache-file=FILE'
+'--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
      disable caching.
 
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.
+
+'--quiet'
+'--silent'
+'-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
+     suppress all normal output, redirect it to '/dev/null' (any error
      messages will still be shown).
 
-`--srcdir=DIR'
+'--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+     'configure' can determine that directory automatically.
 
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.
 
-`--no-create'
-`-n'
+'--no-create'
+'-n'
      Run the configure checks, but stop before creating any output
      files.
 
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.

atmos-2.97.9.tar.gz/Makefile.am -> atmos-2.97.11.tar.gz/Makefile.am Changed

atmos-2.97.9.tar.gz/Makefile.in -> atmos-2.97.11.tar.gz/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -76,14 +86,12 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) COPYING depcomp \
-	install-sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
@@ -146,6 +154,8 @@
 CTAGS = ctags
 CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in AUTHORS COPYING ChangeLog \
+	INSTALL NEWS README depcomp install-sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -295,7 +305,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -486,7 +495,7 @@
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
 	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
@@ -502,11 +511,17 @@
 	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__post_remove_distdir)
 
 dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
 	$(am__post_remove_distdir)
 
 dist-zip: distdir
@@ -524,7 +539,7 @@
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lz*) \
@@ -534,22 +549,23 @@
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^^:\\/:\\/,/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -723,6 +739,8 @@
 	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 	pdf-am ps ps-am tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/aclocal.m4 -> atmos-2.97.11.tar.gz/aclocal.m4 Changed

@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.4 -*- Autoconf -*-
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.))
 
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN(AM_AUTOMAKE_VERSION,
-am__api_version='1.13'
+am__api_version='1.15'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if($1, 1.13.4, ,
+m4_if($1, 1.15.1, ,
       AC_FATAL(Do not call $0, use AM_INIT_AUTOMAKE($1).))dnl
 )
 
@@ -51,14 +51,14 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN(AM_SET_CURRENT_AUTOMAKE_VERSION,
-AM_AUTOMAKE_VERSION(1.13.4)dnl
+AM_AUTOMAKE_VERSION(1.15.1)dnl
 m4_ifndef(AC_AUTOCONF_VERSION,
   m4_copy(m4_PACKAGE_VERSION, AC_AUTOCONF_VERSION))dnl
 _AM_AUTOCONF_VERSION(m4_defn(AC_AUTOCONF_VERSION)))
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -110,7 +110,7 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -141,7 +141,7 @@
 Usually this means the macro was only invoked conditionally.)
 fi))
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -332,7 +332,7 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -408,7 +408,7 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -417,6 +417,12 @@
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define(AC_PROG_CC,
+m4_defn(AC_PROG_CC)
+_AM_PROG_CC_C_O
+)
+
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, NO-DEFINE)
 # AM_INIT_AUTOMAKE(OPTIONS)
 # -----------------------------------------------
@@ -492,8 +498,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 AC_SUBST(mkdir_p, '$(MKDIR_P)')
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 AC_REQUIRE(AC_PROG_AWK)dnl
 AC_REQUIRE(AC_PROG_MAKE_SET)dnl
 AC_REQUIRE(AM_SET_LEADING_DOT)dnl
@@ -525,6 +531,51 @@
 AC_CONFIG_COMMANDS_PRE(dnl
 m4_provide_if(_AM_COMPILER_EXEEXT,
   AM_CONDITIONAL(am__EXEEXT, test -n "$EXEEXT")))dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR(Your 'rm' program is bad, sorry.)
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
 )
 
 dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
@@ -533,7 +584,6 @@
 m4_define(_AC_COMPILER_EXEEXT,
 m4_defn(_AC_COMPILER_EXEEXT)m4_provide(_AM_COMPILER_EXEEXT))
 
-
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
 # that is generated.  The stamp files are numbered to have different names.
@@ -555,7 +605,7 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME("$_am_arg")`/stamp-h$_am_stamp_count)
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -566,7 +616,7 @@
 # Define $install_sh.
 AC_DEFUN(AM_PROG_INSTALL_SH,
 AC_REQUIRE(AM_AUX_DIR_EXPAND)dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -576,7 +626,7 @@
 fi
 AC_SUBST(install_sh))
 
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -597,7 +647,7 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -647,7 +697,7 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -686,7 +736,7 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -717,7 +767,7 @@
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -798,7 +848,7 @@
 rm -f conftest.file
 )
 
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -858,7 +908,7 @@
 _AM_SUBST_NOTMAKE(AM_BACKSLASH)dnl
 )
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -886,7 +936,7 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST(INSTALL_STRIP_PROGRAM))
 
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -905,7 +955,7 @@
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

atmos-2.97.9.tar.gz/configure -> atmos-2.97.11.tar.gz/configure Changed

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for atmos 2.97.9.
+# Generated by GNU Autoconf 2.69 for atmos 2.97.11.
 #
 # Report bugs to <mass-general@curl.sai.msu.ru>.
 #
@@ -580,8 +580,8 @@
 # Identity of this package.
 PACKAGE_NAME='atmos'
 PACKAGE_TARNAME='atmos'
-PACKAGE_VERSION='2.97.9'
-PACKAGE_STRING='atmos 2.97.9'
+PACKAGE_VERSION='2.97.11'
+PACKAGE_STRING='atmos 2.97.11'
 PACKAGE_BUGREPORT='mass-general@curl.sai.msu.ru'
 PACKAGE_URL=''
 
@@ -1273,7 +1273,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures atmos 2.97.9 to adapt to many kinds of systems.
+\`configure' configures atmos 2.97.11 to adapt to many kinds of systems.
 
 Usage: $0 OPTION... VAR=VALUE...
 
@@ -1339,7 +1339,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of atmos 2.97.9:";;
+     short | recursive ) echo "Configuration of atmos 2.97.11:";;
    esac
   cat <<\_ACEOF
 
@@ -1433,7 +1433,7 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-atmos configure 2.97.9
+atmos configure 2.97.11
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1735,7 +1735,7 @@
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by atmos $as_me 2.97.9, which was
+It was created by atmos $as_me 2.97.11, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -2083,7 +2083,7 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version='1.13'
+am__api_version='1.15'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2304,7 +2304,7 @@
 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -2598,7 +2598,7 @@
 
 # Define the identity of the package.
  PACKAGE='atmos'
- VERSION='2.97.9'
+ VERSION='2.97.11'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2632,8 +2632,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 mkdir_p='$(MKDIR_P)'
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
@@ -2649,6 +2649,48 @@
 
 
 
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
 ac_config_headers="$ac_config_headers src/config.h"
 
 
@@ -4665,7 +4707,7 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by atmos $as_me 2.97.9, which was
+This file was extended by atmos $as_me 2.97.11, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -4731,7 +4773,7 @@
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/\\""\`\$/\\\\&/g'`"
 ac_cs_version="\\
-atmos config.status 2.97.9
+atmos config.status 2.97.11
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"

atmos-2.97.9.tar.gz/configure.in -> atmos-2.97.11.tar.gz/configure.in Changed

atmos-2.97.9.tar.gz/depcomp -> atmos-2.97.11.tar.gz/depcomp Changed

atmos-2.97.9.tar.gz/install-sh -> atmos-2.97.11.tar.gz/install-sh Changed

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2016-01-11.22; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,17 +64,6 @@
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -97,7 +82,7 @@
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 OPTION... -T SRCFILE DSTFILE
@@ -137,46 +122,57 @@
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *''*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *''*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | =!) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | =!) dst_arg=./$dst_arg;;
+        esac
+        shift;;
 
-    -T) no_target_directory=true;;
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
-	break;;
+    --) shift
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
 
     *)  break;;
   esac
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -208,6 +204,15 @@
 fi
 
 if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
   trap "ret=130; $do_exit" 2
@@ -223,16 +228,16 @@
 
     *0-7)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -269,41 +274,15 @@
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
       fi
       dstdir=$dst
       dst=$dstdir/`basename "$src"`
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X$.*^/$//*^/^/*/*$' \| \
-	     X"$dst" : 'X$//$^/' \| \
-	     X"$dst" : 'X$//$$' \| \
-	     X"$dst" : 'X$/$' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X$.*^/$\/\/*^/^/*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/\/$^/.*/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/\/$$/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/$.*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
+      dstdir=`dirname "$dst"`
       test -d "$dstdir"
       dstdir_status=$?
     fi
@@ -314,74 +293,74 @@
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *23672367) mkdir_umask=$umask;;
-	  .*00202 | .0202 | .02) mkdir_umask=22;;
-
-	  *0-7)
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *1235670-70-7)
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *23672367) mkdir_umask=$umask;;
+          .*00202 | .0202 | .02) mkdir_umask=22;;
+
+          *0-7)
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *1235670-70-7)
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
@@ -391,53 +370,51 @@
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
-	-=!*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        -=!*) prefix='./';;
+        *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-	test X"$d" = X && continue
+        test X"$d" = X && continue
 
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -472,15 +449,12 @@
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
+       set +f &&
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -493,24 +467,24 @@
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
 
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
@@ -522,6 +496,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

atmos-2.97.9.tar.gz/missing -> atmos-2.97.11.tar.gz/missing Changed

atmos-2.97.9.tar.gz/src/Makefile.am -> atmos-2.97.11.tar.gz/src/Makefile.am Changed

atmos-2.97.9.tar.gz/src/Makefile.in -> atmos-2.97.11.tar.gz/src/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -78,12 +88,11 @@
 POST_UNINSTALL = :
 bin_PROGRAMS = atmos$(EXEEXT)
 subdir = src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/config.h.in $(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
@@ -171,6 +180,8 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -260,7 +271,7 @@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-atmos_CPPFLAGS = -I @abs_top_srcdir@/third-party/lsp/include -I @abs_top_srcdir@/third-party/yalpa/include -DBOOST_UBLAS_SHALLOW_ARRAY_ADAPTOR
+atmos_CPPFLAGS = -I @abs_top_srcdir@/third-party/lsp/include -I @abs_top_srcdir@/third-party/yalpa/include -DBOOST_UBLAS_SHALLOW_ARRAY_ADAPTOR -std=c++98
 atmos_SOURCES = apply_to_all.h \
 	atmos.h \
 	average.h \
@@ -325,7 +336,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -345,8 +355,8 @@
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -840,6 +850,8 @@
 	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
 	uninstall-am uninstall-binPROGRAMS
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/src/integrals.h -> atmos-2.97.11.tar.gz/src/integrals.h Changed

atmos-2.97.9.tar.gz/src/worksheet.cpp -> atmos-2.97.11.tar.gz/src/worksheet.cpp Changed

atmos-2.97.9.tar.gz/test/Makefile.in -> atmos-2.97.11.tar.gz/test/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -76,11 +86,11 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = test
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES =
@@ -140,6 +150,7 @@
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -270,7 +281,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu test/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -541,6 +551,8 @@
 	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 	pdf-am ps ps-am tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 install:
 install-exec:

atmos-2.97.9.tar.gz/test/unit/Makefile.am -> atmos-2.97.11.tar.gz/test/unit/Makefile.am Changed

atmos-2.97.9.tar.gz/test/unit/Makefile.in -> atmos-2.97.11.tar.gz/test/unit/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -78,12 +88,11 @@
 POST_UNINSTALL = :
 bin_PROGRAMS = profile_test$(EXEEXT)
 subdir = test/unit
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES =
@@ -154,6 +163,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -247,7 +257,7 @@
 	@top_srcdir@/src/profile.cpp @top_srcdir@/src/integrals.cpp \
 	@top_srcdir@/src/weight_factory.cpp @top_srcdir@/src/weif.cpp @top_srcdir@/src/utils.cpp
 
-AM_CPPFLAGS = -I @abs_top_srcdir@/src -I @abs_top_srcdir@/third-party/lsp/include -I @abs_top_srcdir@/third-party/yalpa/include -DBOOST_UBLAS_SHALLOW_ARRAY_ADAPTOR
+AM_CPPFLAGS = -I @abs_top_srcdir@/src -I @abs_top_srcdir@/third-party/lsp/include -I @abs_top_srcdir@/third-party/yalpa/include -DBOOST_UBLAS_SHALLOW_ARRAY_ADAPTOR -std=c++98
 EXTRA_DIST = ccd.crv mass_maid.crv spectra/a05.sp
 all: all-am
 
@@ -265,7 +275,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/unit/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu test/unit/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -631,6 +640,8 @@
 	ps ps-am tags tags-am uninstall uninstall-am \
 	uninstall-binPROGRAMS
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/test/unit/profile_test.cpp -> atmos-2.97.11.tar.gz/test/unit/profile_test.cpp Changed

@@ -14,9 +14,13 @@
 #include "utils.h"
 
 using namespace atmos;
-
 using namespace boost::unit_test;
 
+struct test_args {
+	double altitude;
+	double power;
+};
+
 class massdimm_restoration_test {
 public:
 	typedef profile::functor::weight_type weight_type;
@@ -25,9 +29,12 @@
 	massdimm_restoration_test( const weight_type& weight ): weight_(weight) {
 	}
 
-	void operator() ( double altitude, double power ) const {
+	void operator() (const test_args& args) const {
 		using namespace boost::numeric::ublas;
 
+		const double& altitude = args.altitude;
+		const double& power = args.power;
+
 		const vector_type indices = weight_( altitude ) * power;
 
 		vector_type grid(1);
@@ -70,16 +77,32 @@
 
 	massdimm_restoration_test_obj = new massdimm_restoration_test(weight_factory->nullexposure_weight( spectral_cls, inner_diam, outer_diam, dimm_aperture_base, dimm_aperture_size ));
 
-	double powers = { 1e-16, 1e-14, 1e-13, 1e-11 };
-	double altitudes = { 0.0, 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, 3.0, 4.0, 6.0, 8.0, 12.0, 16.0, 25.0 };
-	for( int i=0; i < sizeof(powers)/sizeof(powers0); ++i ) {
-		for (std::size_t j=0; j < sizeof(altitudes)/sizeof(altitudes1); ++j) {
-			restoration->add(BOOST_TEST_CASE(boost::bind(
-				&massdimm_restoration_test::operator(), massdimm_restoration_test_obj, altitudesj, powersi
-			)));
+	const double powers = { 1e-16, 1e-14, 1e-13, 1e-11 };
+	const double altitudes = { 0.0, 0.25, 0.5, 0.75, 1.0, 1.5, 2.0, 3.0, 4.0, 6.0, 8.0, 12.0, 16.0, 25.0 };
+
+	const std::size_t powers_size = sizeof(powers) / sizeof(powers0);
+	const std::size_t altitudes_size = sizeof(altitudes) / sizeof(altitudes0);
+
+	const std::size_t args_size = powers_size * altitudes_size;
+	static test_args argsargs_size;
+
+	for (std::size_t i = 0, k = 0; i < powers_size; ++i) {
+		for (std::size_t j = 0; j < altitudes_size; ++j,++k) {
+			argsk.altitude = altitudesj;
+			argsk.power = powersi;
 		}
 	}
 
+#if BOOST_VERSION < 105900
+	typedef boost::unit_test::callback1<const test_args&> callback_type;
+#else
+	typedef boost::function<void (const test_args&)> callback_type;
+#endif
+
+	callback_type test_function = boost::bind(&massdimm_restoration_test::operator(), massdimm_restoration_test_obj, _1);
+
+	restoration->add(BOOST_PARAM_TEST_CASE(test_function, args, args + args_size));
+
 	framework::master_test_suite().add( restoration );
 
 	return 0;

atmos-2.97.9.tar.gz/third-party/Makefile.in -> atmos-2.97.11.tar.gz/third-party/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -76,11 +86,11 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = third-party
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES =
@@ -139,6 +149,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -270,7 +281,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu third-party/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu third-party/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -541,6 +551,8 @@
 	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 	pdf-am ps ps-am tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 install:
 install-exec:

atmos-2.97.9.tar.gz/third-party/lsp/INSTALL -> atmos-2.97.11.tar.gz/third-party/lsp/INSTALL Changed

@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
+   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@
 Basic Installation
 ==================
 
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
+   Briefly, the shell command './configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the 'README' file for
 instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The `configure' shell script attempts to guess correct values for
+   The 'configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
 you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
 
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
 
    The simplest way to compile this package is:
 
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.
 
-     Running `configure' might take a while.  While running, it prints
+     Running 'configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type `make' to compile the package.
+  2. Type 'make' to compile the package.
 
-  3. Optionally, type `make check' to run any self-tests that come with
+  3. Optionally, type 'make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type `make install' to install the programs and any data files and
+  4. Type 'make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
+     user, and only the 'make install' phase executed with root
      privileges.
 
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
+     regular user, particularly if the prior 'make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type `make uninstall' to remove the installed
+  7. Often, you can also type 'make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide `make
+  8. Some packages, particularly those that use Automake, provide 'make
      distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
+     targets like 'make install' and 'make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
+the 'configure' script does not know about.  Run './configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -113,21 +112,21 @@
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
 directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.
 
-   With a non-GNU `make', it is safer to compile the package for one
+   With a non-GNU 'make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, `make install
+affected directory.  For example, 'make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
 
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, `configure' can usually
+   For packages that use the X Window System, 'configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
+execution of 'make' will be.  For these packages, running './configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
+   HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.
 
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try
 
      ./configure CC="cc"
 
@@ -242,26 +240,26 @@
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
 
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
+   There may be some features 'configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -270,101 +268,101 @@
      OS
      KERNEL-OS
 
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
+environment passed to 'configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
+them in the 'configure' command line, using 'VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
 
      CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-`configure' Invocation
+'configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
+   'configure' recognizes the following options to control how it
 operates.
 
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.
 
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
      Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.
+
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
      script, and exit.
 
-`--cache-file=FILE'
+'--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
      disable caching.
 
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.
+
+'--quiet'
+'--silent'
+'-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
+     suppress all normal output, redirect it to '/dev/null' (any error
      messages will still be shown).
 
-`--srcdir=DIR'
+'--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+     'configure' can determine that directory automatically.
 
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.
 
-`--no-create'
-`-n'
+'--no-create'
+'-n'
      Run the configure checks, but stop before creating any output
      files.
 
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.

atmos-2.97.9.tar.gz/third-party/lsp/Makefile.in -> atmos-2.97.11.tar.gz/third-party/lsp/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -76,14 +86,12 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog COPYING \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) install-sh \
-	missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
@@ -146,6 +154,8 @@
 CTAGS = ctags
 CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in AUTHORS COPYING ChangeLog \
+	INSTALL NEWS README depcomp install-sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -294,7 +304,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -485,7 +494,7 @@
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
 	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
@@ -501,11 +510,17 @@
 	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__post_remove_distdir)
 
 dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
 	$(am__post_remove_distdir)
 
 dist-zip: distdir
@@ -523,7 +538,7 @@
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lz*) \
@@ -533,22 +548,23 @@
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^^:\\/:\\/,/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -722,6 +738,8 @@
 	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 	pdf-am ps ps-am tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/lsp/aclocal.m4 -> atmos-2.97.11.tar.gz/third-party/lsp/aclocal.m4 Changed

@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.4 -*- Autoconf -*-
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.))
 
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN(AM_AUTOMAKE_VERSION,
-am__api_version='1.13'
+am__api_version='1.15'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if($1, 1.13.4, ,
+m4_if($1, 1.15.1, ,
       AC_FATAL(Do not call $0, use AM_INIT_AUTOMAKE($1).))dnl
 )
 
@@ -51,14 +51,14 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN(AM_SET_CURRENT_AUTOMAKE_VERSION,
-AM_AUTOMAKE_VERSION(1.13.4)dnl
+AM_AUTOMAKE_VERSION(1.15.1)dnl
 m4_ifndef(AC_AUTOCONF_VERSION,
   m4_copy(m4_PACKAGE_VERSION, AC_AUTOCONF_VERSION))dnl
 _AM_AUTOCONF_VERSION(m4_defn(AC_AUTOCONF_VERSION)))
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -110,7 +110,7 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -141,7 +141,7 @@
 Usually this means the macro was only invoked conditionally.)
 fi))
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -332,7 +332,7 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -408,7 +408,7 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -417,6 +417,12 @@
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define(AC_PROG_CC,
+m4_defn(AC_PROG_CC)
+_AM_PROG_CC_C_O
+)
+
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, NO-DEFINE)
 # AM_INIT_AUTOMAKE(OPTIONS)
 # -----------------------------------------------
@@ -492,8 +498,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 AC_SUBST(mkdir_p, '$(MKDIR_P)')
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 AC_REQUIRE(AC_PROG_AWK)dnl
 AC_REQUIRE(AC_PROG_MAKE_SET)dnl
 AC_REQUIRE(AM_SET_LEADING_DOT)dnl
@@ -525,6 +531,51 @@
 AC_CONFIG_COMMANDS_PRE(dnl
 m4_provide_if(_AM_COMPILER_EXEEXT,
   AM_CONDITIONAL(am__EXEEXT, test -n "$EXEEXT")))dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR(Your 'rm' program is bad, sorry.)
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
 )
 
 dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
@@ -533,7 +584,6 @@
 m4_define(_AC_COMPILER_EXEEXT,
 m4_defn(_AC_COMPILER_EXEEXT)m4_provide(_AM_COMPILER_EXEEXT))
 
-
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
 # that is generated.  The stamp files are numbered to have different names.
@@ -555,7 +605,7 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME("$_am_arg")`/stamp-h$_am_stamp_count)
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -566,7 +616,7 @@
 # Define $install_sh.
 AC_DEFUN(AM_PROG_INSTALL_SH,
 AC_REQUIRE(AM_AUX_DIR_EXPAND)dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -576,7 +626,7 @@
 fi
 AC_SUBST(install_sh))
 
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -597,7 +647,7 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -647,7 +697,7 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -686,7 +736,7 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -717,7 +767,7 @@
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -798,7 +848,7 @@
 rm -f conftest.file
 )
 
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -858,7 +908,7 @@
 _AM_SUBST_NOTMAKE(AM_BACKSLASH)dnl
 )
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -886,7 +936,7 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST(INSTALL_STRIP_PROGRAM))
 
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -905,7 +955,7 @@
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

atmos-2.97.9.tar.gz/third-party/lsp/configure -> atmos-2.97.11.tar.gz/third-party/lsp/configure Changed

@@ -2195,7 +2195,7 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version='1.13'
+am__api_version='1.15'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2416,7 +2416,7 @@
 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -2745,8 +2745,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 mkdir_p='$(MKDIR_P)'
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
@@ -2762,6 +2762,48 @@
 
 
 
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
 
 ac_config_headers="$ac_config_headers include/config.h"

atmos-2.97.9.tar.gz/third-party/lsp/depcomp -> atmos-2.97.11.tar.gz/third-party/lsp/depcomp Changed

atmos-2.97.9.tar.gz/third-party/lsp/doc/Makefile.in -> atmos-2.97.11.tar.gz/third-party/lsp/doc/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -76,11 +86,11 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/config.h
 CONFIG_CLEAN_FILES =
@@ -105,6 +115,7 @@
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -209,7 +220,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -377,6 +387,8 @@
 	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 	pdf-am ps ps-am tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/lsp/include/Makefile.in -> atmos-2.97.11.tar.gz/third-party/lsp/include/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -76,12 +86,11 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = include
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/config.h.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
@@ -142,6 +151,7 @@
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -272,7 +282,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu include/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -292,8 +301,8 @@
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -576,6 +585,8 @@
 	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
 	tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/lsp/include/lsp/Makefile.in -> atmos-2.97.11.tar.gz/third-party/lsp/include/lsp/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -77,12 +87,12 @@
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
 subdir = include/lsp
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(lsp_include_HEADERS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(lsp_include_HEADERS) \
+	$(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/config.h
 CONFIG_CLEAN_FILES =
@@ -154,6 +164,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -259,7 +270,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/lsp/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu include/lsp/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -499,6 +509,8 @@
 	pdf-am ps ps-am tags tags-am uninstall uninstall-am \
 	uninstall-lsp_includeHEADERS
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/lsp/install-sh -> atmos-2.97.11.tar.gz/third-party/lsp/install-sh Changed

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2016-01-11.22; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,17 +64,6 @@
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -97,7 +82,7 @@
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 OPTION... -T SRCFILE DSTFILE
@@ -137,46 +122,57 @@
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *''*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *''*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | =!) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | =!) dst_arg=./$dst_arg;;
+        esac
+        shift;;
 
-    -T) no_target_directory=true;;
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
-	break;;
+    --) shift
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
 
     *)  break;;
   esac
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -208,6 +204,15 @@
 fi
 
 if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
   trap "ret=130; $do_exit" 2
@@ -223,16 +228,16 @@
 
     *0-7)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -269,41 +274,15 @@
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
       fi
       dstdir=$dst
       dst=$dstdir/`basename "$src"`
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X$.*^/$//*^/^/*/*$' \| \
-	     X"$dst" : 'X$//$^/' \| \
-	     X"$dst" : 'X$//$$' \| \
-	     X"$dst" : 'X$/$' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X$.*^/$\/\/*^/^/*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/\/$^/.*/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/\/$$/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/$.*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
+      dstdir=`dirname "$dst"`
       test -d "$dstdir"
       dstdir_status=$?
     fi
@@ -314,74 +293,74 @@
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *23672367) mkdir_umask=$umask;;
-	  .*00202 | .0202 | .02) mkdir_umask=22;;
-
-	  *0-7)
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *1235670-70-7)
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *23672367) mkdir_umask=$umask;;
+          .*00202 | .0202 | .02) mkdir_umask=22;;
+
+          *0-7)
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *1235670-70-7)
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
@@ -391,53 +370,51 @@
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
-	-=!*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        -=!*) prefix='./';;
+        *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-	test X"$d" = X && continue
+        test X"$d" = X && continue
 
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -472,15 +449,12 @@
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
+       set +f &&
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -493,24 +467,24 @@
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
 
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
@@ -522,6 +496,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

atmos-2.97.9.tar.gz/third-party/lsp/missing -> atmos-2.97.11.tar.gz/third-party/lsp/missing Changed

atmos-2.97.9.tar.gz/third-party/lsp/test/Makefile.in -> atmos-2.97.11.tar.gz/third-party/lsp/test/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -81,12 +91,11 @@
 	least_squares$(EXEEXT) lsp$(EXEEXT) nnls$(EXEEXT) \
 	qr_decomposition$(EXEEXT) singular_decomposition$(EXEEXT)
 subdir = test
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/config.h
 CONFIG_CLEAN_FILES =
@@ -178,6 +187,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -292,7 +302,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu test/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -618,6 +627,8 @@
 	ps ps-am tags tags-am uninstall uninstall-am \
 	uninstall-binPROGRAMS
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/yalpa/INSTALL -> atmos-2.97.11.tar.gz/third-party/yalpa/INSTALL Changed

@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
+   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@
 Basic Installation
 ==================
 
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
+   Briefly, the shell command './configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the 'README' file for
 instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The `configure' shell script attempts to guess correct values for
+   The 'configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
 you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
 
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
 
    The simplest way to compile this package is:
 
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.
 
-     Running `configure' might take a while.  While running, it prints
+     Running 'configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type `make' to compile the package.
+  2. Type 'make' to compile the package.
 
-  3. Optionally, type `make check' to run any self-tests that come with
+  3. Optionally, type 'make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type `make install' to install the programs and any data files and
+  4. Type 'make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
+     user, and only the 'make install' phase executed with root
      privileges.
 
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
+     regular user, particularly if the prior 'make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type `make uninstall' to remove the installed
+  7. Often, you can also type 'make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide `make
+  8. Some packages, particularly those that use Automake, provide 'make
      distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
+     targets like 'make install' and 'make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
+the 'configure' script does not know about.  Run './configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -113,21 +112,21 @@
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
 directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.
 
-   With a non-GNU `make', it is safer to compile the package for one
+   With a non-GNU 'make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, `make install
+affected directory.  For example, 'make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
 
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, `configure' can usually
+   For packages that use the X Window System, 'configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
+execution of 'make' will be.  For these packages, running './configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
+   HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.
 
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try
 
      ./configure CC="cc"
 
@@ -242,26 +240,26 @@
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
 
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
+   There may be some features 'configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -270,101 +268,101 @@
      OS
      KERNEL-OS
 
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
+environment passed to 'configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
+them in the 'configure' command line, using 'VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
 
      CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-`configure' Invocation
+'configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
+   'configure' recognizes the following options to control how it
 operates.
 
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.
 
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
      Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.
+
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
      script, and exit.
 
-`--cache-file=FILE'
+'--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
      disable caching.
 
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.
+
+'--quiet'
+'--silent'
+'-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
+     suppress all normal output, redirect it to '/dev/null' (any error
      messages will still be shown).
 
-`--srcdir=DIR'
+'--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+     'configure' can determine that directory automatically.
 
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.
 
-`--no-create'
-`-n'
+'--no-create'
+'-n'
      Run the configure checks, but stop before creating any output
      files.
 
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.

atmos-2.97.9.tar.gz/third-party/yalpa/Makefile.in -> atmos-2.97.11.tar.gz/third-party/yalpa/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -78,11 +88,6 @@
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) COPYING \
-	COPYING.LESSER config.guess config.sub install-sh missing \
-	ltmain.sh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -90,6 +95,8 @@
 	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
@@ -152,6 +159,9 @@
 CTAGS = ctags
 CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in AUTHORS COPYING COPYING.LESSER \
+	ChangeLog INSTALL NEWS README compile config.guess config.sub \
+	depcomp install-sh ltmain.sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -237,6 +247,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -333,7 +344,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -533,7 +543,7 @@
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
 	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
@@ -549,11 +559,17 @@
 	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__post_remove_distdir)
 
 dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
 	$(am__post_remove_distdir)
 
 dist-zip: distdir
@@ -571,7 +587,7 @@
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lz*) \
@@ -581,22 +597,23 @@
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^^:\\/:\\/,/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -772,6 +789,8 @@
 	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 	ps ps-am tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/yalpa/aclocal.m4 -> atmos-2.97.11.tar.gz/third-party/yalpa/aclocal.m4 Changed

@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.13.4 -*- Autoconf -*-
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.))
 
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN(AM_AUTOMAKE_VERSION,
-am__api_version='1.13'
+am__api_version='1.15'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if($1, 1.13.4, ,
+m4_if($1, 1.15.1, ,
       AC_FATAL(Do not call $0, use AM_INIT_AUTOMAKE($1).))dnl
 )
 
@@ -51,14 +51,14 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN(AM_SET_CURRENT_AUTOMAKE_VERSION,
-AM_AUTOMAKE_VERSION(1.13.4)dnl
+AM_AUTOMAKE_VERSION(1.15.1)dnl
 m4_ifndef(AC_AUTOCONF_VERSION,
   m4_copy(m4_PACKAGE_VERSION, AC_AUTOCONF_VERSION))dnl
 _AM_AUTOCONF_VERSION(m4_defn(AC_AUTOCONF_VERSION)))
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -110,7 +110,7 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -141,7 +141,7 @@
 Usually this means the macro was only invoked conditionally.)
 fi))
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -332,7 +332,7 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -408,7 +408,7 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -417,6 +417,12 @@
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define(AC_PROG_CC,
+m4_defn(AC_PROG_CC)
+_AM_PROG_CC_C_O
+)
+
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, NO-DEFINE)
 # AM_INIT_AUTOMAKE(OPTIONS)
 # -----------------------------------------------
@@ -492,8 +498,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 AC_SUBST(mkdir_p, '$(MKDIR_P)')
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 AC_REQUIRE(AC_PROG_AWK)dnl
 AC_REQUIRE(AC_PROG_MAKE_SET)dnl
 AC_REQUIRE(AM_SET_LEADING_DOT)dnl
@@ -525,6 +531,51 @@
 AC_CONFIG_COMMANDS_PRE(dnl
 m4_provide_if(_AM_COMPILER_EXEEXT,
   AM_CONDITIONAL(am__EXEEXT, test -n "$EXEEXT")))dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR(Your 'rm' program is bad, sorry.)
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
 )
 
 dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
@@ -533,7 +584,6 @@
 m4_define(_AC_COMPILER_EXEEXT,
 m4_defn(_AC_COMPILER_EXEEXT)m4_provide(_AM_COMPILER_EXEEXT))
 
-
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
 # that is generated.  The stamp files are numbered to have different names.
@@ -555,7 +605,7 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME("$_am_arg")`/stamp-h$_am_stamp_count)
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -566,7 +616,7 @@
 # Define $install_sh.
 AC_DEFUN(AM_PROG_INSTALL_SH,
 AC_REQUIRE(AM_AUX_DIR_EXPAND)dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -576,7 +626,7 @@
 fi
 AC_SUBST(install_sh))
 
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -597,7 +647,7 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -647,7 +697,7 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -686,7 +736,7 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -715,9 +765,73 @@
 AC_DEFUN(_AM_IF_OPTION,
 m4_ifset(_AM_MANGLE_OPTION($1), $2, $3))
 
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN(_AM_PROG_CC_C_O,
+AC_REQUIRE(AM_AUX_DIR_EXPAND)dnl
+AC_REQUIRE_AUX_FILE(compile)dnl
+AC_LANG_PUSH(C)dnl
+AC_CACHE_CHECK(
+  whether $CC understands -c and -o together,
+  am_cv_prog_cc_c_o,
+  AC_LANG_CONFTEST(AC_LANG_PROGRAM())
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG($CC -c conftest.$ac_ext -o conftest2.$ac_objext) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i)
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP(C))
+
+# For backward compatibility.
+AC_DEFUN_ONCE(AM_PROG_CC_C_O, AC_REQUIRE(AC_PROG_CC))
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN(AM_RUN_LOG,
+{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); })
+
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -798,7 +912,7 @@
 rm -f conftest.file
 )
 
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -858,7 +972,7 @@
 _AM_SUBST_NOTMAKE(AM_BACKSLASH)dnl
 )
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -886,7 +1000,7 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST(INSTALL_STRIP_PROGRAM))
 
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -905,7 +1019,7 @@
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

atmos-2.97.11.tar.gz/third-party/yalpa/compile Added

@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2016-01-11.22; # UTC
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /!/*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"$.*$ " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.oObBjJ)
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.cC++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.oO)
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile --help --version PROGRAM ARGS
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | */\\cl | cl.exe | */\\cl.exe | \
+  icl | */\\icl | icl.exe | */\\icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*\\/||; s|^a-zA-Z:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '/\\:.-' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|/\\:.-|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:

atmos-2.97.9.tar.gz/third-party/yalpa/config.guess -> atmos-2.97.11.tar.gz/third-party/yalpa/config.guess Changed

@@ -1,8 +1,8 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright 1992-2017 Free Software Foundation, Inc.
 
-timestamp='2013-06-10'
+timestamp='2017-05-27'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -24,12 +24,12 @@
 # program.  This Exception is an additional permission under section 7
 # of the GNU General Public License, version 3 ("GPLv3").
 #
-# Originally written by Per Bothner.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
 #
 # You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
 #
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
 
 
 me=`echo "$0" | sed -e 's,.*/,,'`
@@ -50,7 +50,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2017 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -149,7 +149,7 @@
 	LIBC=gnu
 	#endif
 	EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
 	;;
 esac
 
@@ -178,19 +178,29 @@
 	# Note: NetBSD doesn't particularly care about the vendor
 	# portion of the name.  We always set it to "unknown".
 	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+	    /sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || \
+	    echo unknown)`
 	case "${UNAME_MACHINE_ARCH}" in
 	    armeb) machine=armeb-unknown ;;
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
 	    sh5el) machine=sh5le-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	    earmv*)
+		arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e$armv0-9$.*$,\1,'`
+		endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*$eb$$,\1,p'`
+		machine=${arch}${endian}-${VENDOR}-unknown
+		;;
+	    *) machine=${UNAME_MACHINE_ARCH}-${VENDOR}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
+	# to ELF recently (or will in the future) and ABI.
 	case "${UNAME_MACHINE_ARCH}" in
+	    earm*)
+		os=netbsdelf
+		;;
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -207,6 +217,13 @@
 		os=netbsd
 		;;
 	esac
+	# Determine ABI tags.
+	case "${UNAME_MACHINE_ARCH}" in
+	    earm*)
+		expr='s/^earmv0-9/-eabi/;s/eb$//'
+		abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
+		;;
+	esac
 	# The OS release
 	# Debian GNU/NetBSD machines have a different userland, and
 	# thus, need a distinct triplet. However, they do not need
@@ -217,13 +234,13 @@
 		release='-gnu'
 		;;
 	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/-_.*/\./'`
+		release=`echo ${UNAME_RELEASE} | sed -e 's/-_.*//' | cut -d. -f1,2`
 		;;
 	esac
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
+	echo "${machine}-${os}${release}${abi}"
 	exit ;;
     *:Bitrig:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
@@ -233,6 +250,10 @@
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-${VENDOR}-openbsd${UNAME_RELEASE}
 	exit ;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+	echo ${UNAME_MACHINE_ARCH}-${VENDOR}-libertybsd${UNAME_RELEASE}
+	exit ;;
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-ekkobsd${UNAME_RELEASE}
 	exit ;;
@@ -245,6 +266,9 @@
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-mirbsd${UNAME_RELEASE}
 	exit ;;
+    *:Sortix:*:*)
+	echo ${UNAME_MACHINE}-${VENDOR}-sortix
+	exit ;;
     alpha:OSF1:*:*)
 	case $UNAME_RELEASE in
 	*4.0)
@@ -261,42 +285,42 @@
 	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha $.*$ processor.*$/\1/p' | head -n 1`
 	case "$ALPHA_CPU_TYPE" in
 	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
+		UNAME_MACHINE=alpha ;;
 	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
+		UNAME_MACHINE=alpha ;;
 	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
+		UNAME_MACHINE=alpha ;;
 	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
+		UNAME_MACHINE=alphaev5 ;;
 	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
+		UNAME_MACHINE=alphaev56 ;;
 	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
+		UNAME_MACHINE=alphapca56 ;;
 	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
+		UNAME_MACHINE=alphapca57 ;;
 	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
+		UNAME_MACHINE=alphaev6 ;;
 	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
+		UNAME_MACHINE=alphaev67 ;;
 	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
+		UNAME_MACHINE=alphaev68 ;;
 	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
+		UNAME_MACHINE=alphaev68 ;;
 	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
+		UNAME_MACHINE=alphaev68 ;;
 	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
+		UNAME_MACHINE=alphaev69 ;;
 	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
+		UNAME_MACHINE=alphaev7 ;;
 	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
+		UNAME_MACHINE=alphaev79 ;;
 	esac
 	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^PVTX//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^PVTX//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
 	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
 	exitcode=$?
 	trap '' 0
@@ -369,16 +393,16 @@
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	eval $set_cc_for_build
-	SUN_ARCH="i386"
+	SUN_ARCH=i386
 	# If there is a compiler, see if it is configured for 64-bit objects.
 	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
 	# This test works for both compilers.
-	if  "$CC_FOR_BUILD" != 'no_compiler_found' ; then
+	if  "$CC_FOR_BUILD" != no_compiler_found ; then
 	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
 		grep IS_64BIT_ARCH >/dev/null
 	    then
-		SUN_ARCH="x86_64"
+		SUN_ARCH=x86_64
 	    fi
 	fi
 	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/^.*//'`
@@ -403,7 +427,7 @@
 	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
 	case "`/bin/arch`" in
 	    sun3)
 		echo m68k-sun-sunos${UNAME_RELEASE}
@@ -589,8 +613,9 @@
 	else
 		IBM_ARCH=powerpc
 	fi
-	if  -x /usr/bin/oslevel  ; then
-		IBM_REV=`/usr/bin/oslevel`
+	if  -x /usr/bin/lslpp  ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/0-9*$/0/`
 	else
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
@@ -627,13 +652,13 @@
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
 		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
 		    case "${sc_cpu_version}" in
-		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
 		      532)                      # CPU_PA_RISC2_0
 			case "${sc_kernel_bits}" in
-			  32) HP_ARCH="hppa2.0n" ;;
-			  64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			  32) HP_ARCH=hppa2.0n ;;
+			  64) HP_ARCH=hppa2.0w ;;
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
 			esac ;;
 		    esac
 		fi
@@ -672,11 +697,11 @@
 		    exit (0);
 		}
 EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
 		fi ;;
 	esac
-	if  ${HP_ARCH} = "hppa2.0w" 
+	if  ${HP_ARCH} = hppa2.0w 
 	then
 	    eval $set_cc_for_build
 
@@ -689,12 +714,12 @@
 	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
 	    # => hppa64-hp-hpux11.23
 
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
 		grep -q __LP64__
 	    then
-		HP_ARCH="hppa2.0w"
+		HP_ARCH=hppa2.0w
 	    else
-		HP_ARCH="hppa64"
+		HP_ARCH=hppa64
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
@@ -799,14 +824,14 @@
 	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.^.*$/.X/'
 	exit ;;
     F3001:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
 	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
 	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
 	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
@@ -822,10 +847,11 @@
 	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	case ${UNAME_PROCESSOR} in
 	    amd64)
-		echo x86_64-${VENDOR}-freebsd`echo ${UNAME_RELEASE}|sed -e 's/-(.*//'` ;;
-	    *)
-		echo ${UNAME_PROCESSOR}-${VENDOR}-freebsd`echo ${UNAME_RELEASE}|sed -e 's/-(.*//'` ;;
+		UNAME_PROCESSOR=x86_64 ;;
+	    i386)
+		UNAME_PROCESSOR=i586 ;;
 	esac
+	echo ${UNAME_PROCESSOR}-${VENDOR}-freebsd`echo ${UNAME_RELEASE}|sed -e 's/-(.*//'`
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -836,7 +862,7 @@
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    i*:MSYS*:*)
+    *:MSYS*:*)
 	echo ${UNAME_MACHINE}-pc-msys
 	exit ;;
     i*:windows32*:*)
@@ -888,7 +914,7 @@
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-${VENDOR}-`echo ${UNAME_SYSTEM} | sed 's,^^/*/,,' | tr 'A-Z' 'a-z'``echo ${UNAME_RELEASE}|sed -e 's/-(.*//'`-${LIBC}
+	echo ${UNAME_MACHINE}-${VENDOR}-`echo ${UNAME_SYSTEM} | sed 's,^^/*/,,' | tr ":upper:" ":lower:"``echo ${UNAME_RELEASE}|sed -e 's/-(.*//'`-${LIBC}
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
@@ -911,7 +937,7 @@
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
 	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
 	exit ;;
     arc:Linux:*:* | arceb:Linux:*:*)
@@ -942,6 +968,9 @@
     crisv32:Linux:*:*)
 	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
+    e2k:Linux:*:*)
+	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
+	exit ;;
     frv:Linux:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
 	exit ;;
@@ -954,6 +983,9 @@
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
 	exit ;;
+    k1om:Linux:*:*)
+	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
+	exit ;;
     m32r*:Linux:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
 	exit ;;
@@ -979,10 +1011,13 @@
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
 	test x"${CPU}" != x && { echo "${CPU}-${VENDOR}-linux-${LIBC}"; exit; }
 	;;
-    or1k:Linux:*:*)
+    mips64el:Linux:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
 	exit ;;
-    or32:Linux:*:*)
+    openrisc*:Linux:*:*)
+	echo or1k-${VENDOR}-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
@@ -1011,6 +1046,9 @@
     ppcle:Linux:*:*)
 	echo powerpcle-${VENDOR}-linux-${LIBC}
 	exit ;;
+    riscv32:Linux:*:* | riscv64:Linux:*:*)
+	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
+	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
 	exit ;;
@@ -1030,7 +1068,7 @@
 	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
 	exit ;;
     xtensa*:Linux:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}
@@ -1109,7 +1147,7 @@
 	# uname -m prints for DJGPP always 'pc', but it prints nothing about
 	# the processor, so we play safe by assuming i586.
 	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configury will decide that
+	# prints for the "djgpp" host, or else GDB configure will decide that
 	# this is a cross-build.
 	echo i586-pc-msdosdjgpp
 	exit ;;
@@ -1258,6 +1296,9 @@
     SX-8R:SUPER-UX:*:*)
 	echo sx8r-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-ACE:SUPER-UX:*:*)
+	echo sxace-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1270,22 +1311,39 @@
 	if test "$UNAME_PROCESSOR" = unknown ; then
 	    UNAME_PROCESSOR=powerpc
 	fi
-	if  "$CC_FOR_BUILD" != 'no_compiler_found' ; then
-	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		case $UNAME_PROCESSOR in
-		    i386) UNAME_PROCESSOR=x86_64 ;;
-		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
-		esac
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+	    if  "$CC_FOR_BUILD" != no_compiler_found ; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		       grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+		# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+		if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		       grep IS_PPC >/dev/null
+		then
+		    UNAME_PROCESSOR=powerpc
+		fi
 	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
 	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:0123456789*:*)
 	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
+	if test "$UNAME_PROCESSOR" = x86; then
 		UNAME_PROCESSOR=i386
 		UNAME_MACHINE=pc
 	fi
@@ -1294,15 +1352,18 @@
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit ;;
-    NEO-?:NONSTOP_KERNEL:*:*)
+    NEO-*:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
+    NSR-*:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
 	exit ;;
+    NSX-*:NONSTOP_KERNEL:*:*)
+	echo nsx-tandem-nsk${UNAME_RELEASE}
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
 	exit ;;
@@ -1316,7 +1377,7 @@
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
 	# operating systems.
-	if test "$cputype" = "386"; then
+	if test "$cputype" = 386; then
 	    UNAME_MACHINE=i386
 	else
 	    UNAME_MACHINE="$cputype"
@@ -1358,7 +1419,7 @@
 	echo i386-pc-xenix
 	exit ;;
     i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
 	exit ;;
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
@@ -1369,171 +1430,25 @@
     x86_64:VMkernel:*:*)
 	echo ${UNAME_MACHINE}-${VENDOR}-esx
 	exit ;;
-esac
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach $0-9*$.*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if  -x /usr/convex/getsysinfo 
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
+    amd64:Isilon\ OneFS:*:*)
+	echo x86_64-${VENDOR}-onefs
 	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
+esac
 
 cat >&2 <<EOF
 $0: unable to guess system type
 
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite
+config.guess and config.sub with the latest versions from:
 
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
 and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
 
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
 
 config.guess timestamp = $timestamp

atmos-2.97.9.tar.gz/third-party/yalpa/config.sub -> atmos-2.97.11.tar.gz/third-party/yalpa/config.sub Changed

atmos-2.97.9.tar.gz/third-party/yalpa/configure -> atmos-2.97.11.tar.gz/third-party/yalpa/configure Changed

@@ -638,6 +638,7 @@
 LIBOBJS
 CXXCPP
 CPP
+LT_SYS_LIBRARY_PATH
 OTOOL64
 OTOOL
 LIPO
@@ -764,6 +765,7 @@
 enable_static
 with_pic
 enable_fast_install
+with_aix_soname
 with_gnu_ld
 with_sysroot
 enable_libtool_lock
@@ -779,6 +781,7 @@
 CCC
 CC
 CFLAGS
+LT_SYS_LIBRARY_PATH
 CPP
 CXXCPP'
 
@@ -1416,9 +1419,12 @@
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --with-pic=PKGS       try to use only PIC/non-PIC objects default=use
                           both
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, default=aix.
   --with-gnu-ld           assume the C compiler uses GNU ld default=no
-  --with-sysroot=DIR Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).
+  --with-sysroot=DIR    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
 
 Some influential environment variables:
   CXX         C++ compiler command
@@ -1430,6 +1436,8 @@
               you have headers in a nonstandard directory <include dir>
   CC          C compiler command
   CFLAGS      C compiler flags
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
   CPP         C preprocessor
   CXXCPP      C++ preprocessor
 
@@ -2337,7 +2345,7 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version='1.13'
+am__api_version='1.15'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2558,7 +2566,7 @@
 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -2887,8 +2895,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 mkdir_p='$(MKDIR_P)'
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
@@ -2904,6 +2912,48 @@
 
 
 
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
 
 ac_config_headers="$ac_config_headers include/yalpa/yalpa_config.h"
 
@@ -3622,8 +3672,8 @@
 
 
 
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
 
 
 
@@ -3637,7 +3687,7 @@
 
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
@@ -3757,7 +3807,7 @@
     $ECHO ""
 }
 
-case "$ECHO" in
+case $ECHO in
   printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
 $as_echo "printf" >&6; } ;;
   print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -4318,6 +4368,65 @@
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
 depcc="$CC"   am_compiler_list=
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
@@ -4747,19 +4856,19 @@
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -4773,7 +4882,7 @@
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -4784,7 +4893,7 @@
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -4795,32 +4904,32 @@
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -4863,33 +4972,38 @@
 else
   if test -n "$NM"; then
   # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  lt_cv_path_NM=$NM
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
+  lt_nm_to_check=${ac_tool_prefix}nm
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
 	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
-	  break
+	  break 2
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
-	    break
+	    break 2
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -4900,15 +5014,15 @@
 	esac
       fi
     done
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
   done
   : ${lt_cv_path_NM=no}
 fi
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
@@ -5014,9 +5128,9 @@
   fi
 fi
 
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
+      DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
     *)
       DUMPBIN=:
@@ -5024,8 +5138,8 @@
     esac
   fi
 
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
   fi
 fi
 test -z "$NM" && NM=nm
@@ -5076,7 +5190,7 @@
   $as_echo_n "(cached) " >&6
 else
     i=0
-  teststring="ABCD"
+  teststring=ABCD
 
   case $build_os in
   msdosdjgpp*)
@@ -5116,7 +5230,7 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -5166,22 +5280,23 @@
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
+      for i in 1 2 3 4 5 6 7 8; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
+	      test 17 != "$i" # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
@@ -5199,7 +5314,7 @@
 
 fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
 $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
 else
@@ -5217,30 +5332,6 @@
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
@@ -5363,13 +5454,13 @@
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       reload_cmds=false
     fi
     ;;
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
@@ -5497,13 +5588,13 @@
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic regex' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix4-9*)
@@ -5530,8 +5621,7 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
@@ -5567,10 +5657,6 @@
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -5609,7 +5695,7 @@
   ;;
 
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -5631,8 +5717,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
     lt_cv_deplibs_check_method='match_pattern /lib^/+(\.so\.0-9+\.0-9+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib^/+(\.so\.0-9+\.0-9+|_pic\.a)$'
@@ -5685,6 +5771,9 @@
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
 fi
@@ -5842,8 +5931,8 @@
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -5855,7 +5944,7 @@
   ;;
 *)
   # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
   ;;
 esac
 
@@ -6010,7 +6099,7 @@
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-      if test "$ac_status" -eq 0; then
+      if test 0 -eq "$ac_status"; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -6018,7 +6107,7 @@
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-	if test "$ac_status" -ne 0; then
+	if test 0 -ne "$ac_status"; then
           lt_cv_ar_at_file=@
         fi
       fi
@@ -6031,7 +6120,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
 $as_echo "$lt_cv_ar_at_file" >&6; }
 
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
@@ -6248,7 +6337,7 @@
 
 if test -n "$RANLIB"; then
   case $host_os in
-  openbsd*)
+  bitrig* | openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
@@ -6338,7 +6427,7 @@
   symcode='ABCDGISTW'
   ;;
 hpux*)
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     symcode='ABCDEGRST'
   fi
   ;;
@@ -6371,14 +6460,44 @@
   symcode='ABCDGIRSTW' ;;
 esac
 
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* $.*$$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* $.*$$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* $.*$$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* $lib.*$$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* $.*$$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* $.*$$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* $.*$$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $^ *$ *$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $^ *$ $^ *$$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $^ *$ *$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $^ *$ $lib^ *$$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $^ *$ $^ *$$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: $.*$ .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* $.*$$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: $.*$ .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* $lib.*$$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* $.*$$/  {\"lib\1\", (void *) \&\1},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -6396,21 +6515,24 @@
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hidei};"\
 "     /Section length .*#relocs.*(pick any)/{hidelast_section=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn2,2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF $^|$*()/{next};"\
 "     {if(hidesection) next};"\
-"     {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a2, s)};"\
-"     s1~/^@?/{print s1, s1; next};"\
-"     s1~prfx {split(s1,t,\"@\"); print t1, substr(t1,length(prfx))}"\
+"     {f=\"D\"}; \$ 0~/.*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a2,s)};"\
+"     s1~/^@?/{print f,s1,s1; next};"\
+"     s1~prfx {split(s1,t,\"@\"); print f,t1,substr(t1,length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*	 $$symcode$symcode*$	 	 *$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -6458,11 +6580,11 @@
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
@@ -6488,7 +6610,7 @@
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
-	  $SED "s/^$symcode$symcode* $.*$ $.*$$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  $SED "s/^$symcode$symcode* .* $.*$$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
@@ -6508,13 +6630,13 @@
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
+	  LIBS=conftstm.$ac_objext
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
@@ -6535,7 +6657,7 @@
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
+  if test yes = "$pipe_works"; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
@@ -6588,6 +6710,16 @@
 
 
 
+
+
+
+
+
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
 $as_echo_n "checking for sysroot... " >&6; }
 
@@ -6600,9 +6732,9 @@
 
 
 lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
  yes)
-   if test "$GCC" = yes; then
+   if test yes = "$GCC"; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
@@ -6612,8 +6744,8 @@
  no|'')
    ;; #(
  *)
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
    as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
    ;;
 esac
@@ -6625,19 +6757,100 @@
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in dd; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *\\/compile | ccache | *\\/ccache ) ;;
+        distcc | *\\/distcc | purify | *\\/purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
 
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
 fi
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -6646,24 +6859,25 @@
   test $ac_status = 0; }; then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
-	HPUX_IA64_MODE="32"
+	HPUX_IA64_MODE=32
 	;;
       *ELF-64*)
-	HPUX_IA64_MODE="64"
+	HPUX_IA64_MODE=64
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
@@ -6692,9 +6906,50 @@
   rm -rf conftest*
   ;;
 
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -6708,7 +6963,14 @@
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
 	    ;;
 	  powerpc64le-*linux*)
 	    LD="${LD-ld} -m elf32lppclinux"
@@ -6753,7 +7015,7 @@
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
+  SAVE_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -6793,13 +7055,14 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
 $as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+  if test yes != "$lt_cv_cc_needs_belf"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+    CFLAGS=$SAVE_CFLAGS
   fi
   ;;
 *-*solaris*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -6811,7 +7074,7 @@
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
-        i?86-*-solaris*)
+        i?86-*-solaris*|x86_64-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
@@ -6820,7 +7083,7 @@
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
+          LD=${LD-ld}_sol2
         fi
         ;;
       *)
@@ -6836,7 +7099,7 @@
   ;;
 esac
 
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -6947,7 +7210,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
 $as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
   MANIFEST_TOOL=:
 fi
 
@@ -7450,7 +7713,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
+      if test -z "$LT_MULTI_MODULE"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
@@ -7468,7 +7731,7 @@
 	  cat conftest.err >&5
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&5
@@ -7507,7 +7770,7 @@
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-	LDFLAGS="$save_LDFLAGS"
+	LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -7536,7 +7799,7 @@
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&5
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&5
@@ -7549,32 +7812,32 @@
 $as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.012)
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin91*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.012*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.012,.*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
 	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
       _lt_dar_single_mod='$single_module'
     fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
     else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -7582,6 +7845,41 @@
     ;;
   esac
 
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR:DIR:"
+#       string "DIR DIR" will be prepended to VARIABLE
+# ":DIR:DIR"
+#       string "DIR DIR" will be appended to VARIABLE
+# "DIRP:DIRP::DIRA:DIRA"
+#       string "DIRP DIRP" will be prepended to VARIABLE and string
+#       "DIRA DIRA" will be appended to VARIABLE
+# "DIR:DIR"
+#       VARIABLE will be replaced by "DIR DIR"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -7866,9 +8164,9 @@
 
 func_stripname_cnf ()
 {
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  case $2 in
+  .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
   esac
 } # func_stripname_cnf
 
@@ -7895,14 +8193,14 @@
     *)
       enable_shared=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7926,14 +8224,14 @@
     *)
      enable_static=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7957,14 +8255,14 @@
     *)
       pic_mode=default
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7972,8 +8270,6 @@
 fi
 
 
-test -z "$pic_mode" && pic_mode=default
-
 
 
 
@@ -7989,14 +8285,14 @@
     *)
       enable_fast_install=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -8010,11 +8306,63 @@
 
 
 
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix5-9*,yes)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else
+  if ${lt_cv_with_aix_soname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_with_aix_soname=aix
+fi
+
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
 
 
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -8063,7 +8411,7 @@
 
 
 
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
@@ -8102,7 +8450,7 @@
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
+  if test set != "${COLLECT_NAMES+set}"; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -8113,14 +8461,14 @@
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
@@ -8129,15 +8477,8 @@
 test -z "$LD" && LD=ld
 test -z "$ac_objext" && ac_objext=o
 
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *\\/compile | ccache | *\\/ccache ) ;;
-    distcc | *\\/distcc | purify | *\\/purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
 # Only perform the check for file, if the check method requires it
@@ -8152,22 +8493,22 @@
 else
   case $MAGIC_CMD in
 \\/* |  ?:\\/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -8190,13 +8531,13 @@
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -8218,22 +8559,22 @@
 else
   case $MAGIC_CMD in
 \\/* |  ?:\\/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -8256,13 +8597,13 @@
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -8283,7 +8624,7 @@
 
 # Use C for the default configuration in the libtool script
 
-lt_save_CC="$CC"
+lt_save_CC=$CC
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8345,7 +8686,7 @@
 
 lt_prog_compiler_no_builtin_flag=
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $cc_basename in
   nvcc*)
     lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -8361,7 +8702,7 @@
   lt_cv_prog_compiler_rtti_exceptions=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -8391,7 +8732,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
 else
     :
@@ -8409,17 +8750,18 @@
 lt_prog_compiler_static=
 
 
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     lt_prog_compiler_wl='-Wl,'
     lt_prog_compiler_static='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       fi
+      lt_prog_compiler_pic='-fPIC'
       ;;
 
     amigaos*)
@@ -8430,8 +8772,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -8447,6 +8789,11 @@
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -8517,7 +8864,7 @@
     case $host_os in
     aix*)
       lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       else
@@ -8525,10 +8872,29 @@
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -8544,7 +8910,7 @@
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      lt_prog_compiler_static='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -8553,9 +8919,9 @@
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
@@ -8580,6 +8946,12 @@
 	lt_prog_compiler_pic='-PIC'
 	lt_prog_compiler_static='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -8677,7 +9049,7 @@
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	lt_prog_compiler_pic='-Kconform_pic'
 	lt_prog_compiler_static='-Bstatic'
       fi
@@ -8706,7 +9078,7 @@
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic=
     ;;
@@ -8738,7 +9110,7 @@
   lt_cv_prog_compiler_pic_works=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -8768,7 +9140,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -8800,7 +9172,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -8819,13 +9191,13 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
 $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
     :
 else
     lt_prog_compiler_static=
@@ -8945,8 +9317,8 @@
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -8958,9 +9330,9 @@
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -9003,9 +9375,9 @@
   # included in the symbol list
   include_expsyms=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__FID_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -9020,7 +9392,7 @@
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -9028,7 +9400,7 @@
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -9038,7 +9410,7 @@
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -9060,24 +9432,24 @@
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ 01.* | *\ 2.0-9.* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -9090,7 +9462,7 @@
     case $host_os in
     aix3-9*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
@@ -9109,7 +9481,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -9125,7 +9497,7 @@
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -9135,7 +9507,7 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
@@ -9143,61 +9515,89 @@
       exclude_expsyms='_+GLOBAL_OFFSET_TABLE_|_+GLOBAL__FID_.*|_+head_A-Za-z0-9_+_dll|A-Za-z0-9_+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^	 *//'\''     -e '\''/^$;.*$*$/d'\''     -e '\''s/^$EXPORTS\|LIBRARY$$	 .*$*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	ld_shlibs=no
       fi
       ;;
 
     haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       link_all_deplibs=yes
       ;;
 
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^$.*$$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
     interix3-9*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -9208,42 +9608,47 @@
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xlcC* | bgxlcC* | mpixlcC*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -9257,8 +9662,8 @@
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -9276,8 +9681,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -9289,7 +9694,7 @@
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -9304,9 +9709,9 @@
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -9323,15 +9728,15 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
       ;;
     esac
 
-    if test "$ld_shlibs" = no; then
+    if test no = "$ld_shlibs"; then
       runpath_var=
       hardcode_libdir_flag_spec=
       export_dynamic_flag_spec=
@@ -9347,7 +9752,7 @@
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct=unsupported
@@ -9355,34 +9760,57 @@
       ;;
 
     aix4-9*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B$^B*$$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.23|aix4.23.*|aix5-9*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -9401,13 +9829,21 @@
       hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.012|aix4.012.*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -9426,35 +9862,42 @@
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      export_dynamic_flag_spec='${wl}-bexpall'
+      export_dynamic_flag_spec='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        if test "${lt_cv_aix_libpath+set}" = set; then
+        if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -9489,7 +9932,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -9497,17 +9940,17 @@
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 if test "${lt_cv_aix_libpath+set}" = set; then
+	 if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -9542,7 +9985,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -9550,21 +9993,33 @@
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    whole_archive_flag_spec='$convenience'
 	  fi
 	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\$, \$%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -9573,7 +10028,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -9603,16 +10058,17 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^	 *//'\''     -e '\''/^$;.*$*$/d'\''     -e '\''s/^$EXPORTS\|LIBRARY$$	 .*$*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
 	enable_shared_with_static_runtimes=yes
@@ -9621,18 +10077,18 @@
 	# Don't use ranlib
 	old_postinstall_cmds='chmod 644 $oldlib'
 	postlink_cmds='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -9641,7 +10097,7 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -9660,24 +10116,24 @@
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec=''
   fi
   link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
+  allow_undefined_flag=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -9719,33 +10175,33 @@
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_direct=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
+      export_dynamic_flag_spec='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 	hardcode_direct=yes
 	hardcode_direct_absolute=yes
-	export_dynamic_flag_spec='${wl}-E'
+	export_dynamic_flag_spec='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -9753,25 +10209,25 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 
@@ -9783,7 +10239,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS -b"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -9802,14 +10258,14 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
 $as_echo "$lt_cv_prog_compiler__b" >&6; }
 
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 else
     archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
 fi
@@ -9817,8 +10273,8 @@
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 
 	case $host_cpu in
@@ -9829,7 +10285,7 @@
 	*)
 	  hardcode_direct=yes
 	  hardcode_direct_absolute=yes
-	  export_dynamic_flag_spec='${wl}-E'
+	  export_dynamic_flag_spec='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -9840,8 +10296,8 @@
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -9851,8 +10307,8 @@
 if ${lt_cv_irix_exported_symbol+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 int foo (void) { return 0; }
@@ -9864,24 +10320,34 @@
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-           LDFLAGS="$save_LDFLAGS"
+           LDFLAGS=$save_LDFLAGS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
 $as_echo "$lt_cv_irix_exported_symbol" >&6; }
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -9896,7 +10362,7 @@
     newsos6)
       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_shlibpath_var=no
       ;;
@@ -9904,27 +10370,19 @@
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	hardcode_direct=yes
 	hardcode_shlibpath_var=no
 	hardcode_direct_absolute=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
 	else
-	  case $host_os in
-	   openbsd01.* | openbsd2.0-7 | openbsd2.0-7.*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
 	fi
       else
 	ld_shlibs=no
@@ -9935,33 +10393,53 @@
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^$.*$$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9972,24 +10450,24 @@
 
     solaris*)
       no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -9999,11 +10477,11 @@
       solaris2.0-5 | solaris2.0-5.*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
 	fi
@@ -10013,10 +10491,10 @@
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -10065,43 +10543,43 @@
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.01.10* | unixware7* | sco3.2v5.0.024*)
-      no_undefined_flag='${wl}-z,text'
+      no_undefined_flag='$wl-z,text'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
+      export_dynamic_flag_spec='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -10116,10 +10594,10 @@
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	export_dynamic_flag_spec='$wl-Blargedynsym'
 	;;
       esac
     fi
@@ -10127,7 +10605,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
 $as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
 
 with_gnu_ld=$with_gnu_ld
 
@@ -10153,7 +10631,7 @@
   # Assume -lc should be added
   archive_cmds_need_lc=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -10368,14 +10846,14 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
   esac
   case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=$A-Za-z:$,\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
+    mingw* | cegcc*) lt_sed_strip_eq='s|=$A-Za-z:$|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
@@ -10391,28 +10869,35 @@
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
+  # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
   for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
+          lt_foo = "/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
@@ -10426,7 +10911,7 @@
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/$A-Za-z:$,\1,g'` ;;
+      $SED 's|/$A-Za-z:$|\1|g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
@@ -10435,7 +10920,7 @@
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -10452,14 +10937,16 @@
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix4-9*)
@@ -10467,41 +10954,91 @@
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.01 | aix4.01.*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -10511,18 +11048,18 @@
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/$^/*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/$^/*$\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -10530,8 +11067,8 @@
 bsdi45*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -10543,7 +11080,7 @@
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -10552,8 +11089,8 @@
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -10569,17 +11106,17 @@
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -10588,8 +11125,8 @@
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -10616,7 +11153,7 @@
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';c-zC-Z:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -10629,8 +11166,8 @@
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -10643,7 +11180,7 @@
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -10656,8 +11193,8 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -10670,8 +11207,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -10689,12 +11226,13 @@
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -10719,26 +11257,15 @@
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -10756,14 +11283,15 @@
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -10771,8 +11299,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -10781,8 +11309,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -10795,8 +11323,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -10807,7 +11335,7 @@
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -10815,8 +11343,8 @@
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -10835,8 +11363,8 @@
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -10845,13 +11373,33 @@
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -10895,7 +11443,12 @@
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^	 *hwcap	 /d;s/:,	/ /g;s/=^=*$//;s/=^= * / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -10915,12 +11468,12 @@
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -10930,7 +11483,7 @@
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -10939,58 +11492,68 @@
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.89 | openbsd2.89.*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -11001,8 +11564,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -11012,11 +11575,11 @@
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -11024,8 +11587,8 @@
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -11046,24 +11609,24 @@
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -11081,7 +11644,7 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -11089,8 +11652,8 @@
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -11100,20 +11663,35 @@
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
 
 
 
@@ -11210,15 +11788,15 @@
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
    test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
+   test yes = "$hardcode_automatic"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
+  if test no != "$hardcode_direct" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
   else
@@ -11233,12 +11811,12 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
 $as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -11248,7 +11826,7 @@
 
 
 
-  if test "x$enable_dlopen" != xyes; then
+  if test yes != "$enable_dlopen"; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -11258,23 +11836,23 @@
 
   case $host_os in
   beos*)
-    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen=load_add_on
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen=LoadLibrary
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
-    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen=dlopen
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
-  # if libdl is installed we need to link against it
+    # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
 if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -11312,10 +11890,10 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
 
-    lt_cv_dlopen="dyld"
+    lt_cv_dlopen=dyld
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
 
@@ -11323,10 +11901,18 @@
 
     ;;
 
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
 if test "x$ac_cv_func_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load"
+  lt_cv_dlopen=shl_load
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -11365,11 +11951,11 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
 if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
 if test "x$ac_cv_func_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen"
+  lt_cv_dlopen=dlopen
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -11408,7 +11994,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -11447,7 +12033,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
 if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -11486,7 +12072,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
 if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
 fi
 
 
@@ -11507,21 +12093,21 @@
     ;;
   esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
+  if test no = "$lt_cv_dlopen"; then
     enable_dlopen=no
+  else
+    enable_dlopen=yes
   fi
 
   case $lt_cv_dlopen in
   dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
+    save_LDFLAGS=$LDFLAGS
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
+    save_LIBS=$LIBS
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -11529,7 +12115,7 @@
 if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -11576,9 +12162,9 @@
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -11608,7 +12194,7 @@
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -11628,14 +12214,14 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
 $as_echo "$lt_cv_dlopen_self" >&6; }
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
+    if test yes = "$lt_cv_dlopen_self"; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
 if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self_static=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -11682,9 +12268,9 @@
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -11714,7 +12300,7 @@
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -11735,9 +12321,9 @@
 $as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
     ;;
   esac
 
@@ -11781,7 +12367,7 @@
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
-    if test -n "$STRIP" ; then
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -11809,7 +12395,7 @@
 
 
 
-  # Report which library types will actually be built
+  # Report what library types will actually be built
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
 $as_echo_n "checking if libtool supports shared libraries... " >&6; }
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -11817,13 +12403,13 @@
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
+  test no = "$can_build_shared" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
-    test "$enable_shared" = yes && enable_static=no
+    test yes = "$enable_shared" && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
@@ -11831,8 +12417,12 @@
     ;;
 
   aix4-9*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
     fi
     ;;
   esac
@@ -11842,7 +12432,7 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
 $as_echo_n "checking whether to build static libraries... " >&6; }
   # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
+  test yes = "$enable_shared" || enable_static=yes
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
 $as_echo "$enable_static" >&6; }
 
@@ -11856,11 +12446,11 @@
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-CC="$lt_save_CC"
+CC=$lt_save_CC
 
-      if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
+      if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
   ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -12039,7 +12629,7 @@
 # the CXX compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="int some_variable = 0;"
 
@@ -12100,46 +12690,39 @@
   CFLAGS=$CXXFLAGS
   compiler=$CC
   compiler_CXX=$CC
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *\\/compile | ccache | *\\/ccache ) ;;
-    distcc | *\\/distcc | purify | *\\/purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
   if test -n "$compiler"; then
     # We don't want -fno-exception when compiling C++ code, so set the
     # no_builtin_flag separately
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
     else
       lt_prog_compiler_no_builtin_flag_CXX=
     fi
 
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       # Set up default GNU C++ configuration
 
 
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -12153,7 +12736,7 @@
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -12164,7 +12747,7 @@
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -12175,32 +12758,32 @@
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -12236,22 +12819,22 @@
 
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if test yes = "$with_gnu_ld"; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 
-        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        export_dynamic_flag_spec_CXX='$wl--export-dynamic'
 
         # If archive_cmds runs LD, not CC, wlarc should be empty
         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
         #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
+        wlarc='$wl'
 
         # ancient GNU ld didn't support --whole-archive et. al.
         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 	  $GREP 'no-whole-archive' > /dev/null; then
-          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+          whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
         else
           whole_archive_flag_spec_CXX=
         fi
@@ -12288,18 +12871,30 @@
         ld_shlibs_CXX=no
         ;;
       aix4-9*)
-        if test "$host_cpu" = ia64; then
+        if test ia64 = "$host_cpu"; then
           # On IA64, the linker does run time linking by default, so we don't
           # have to do anything special.
           aix_use_runtimelinking=no
           exp_sym_flag='-Bexport'
-          no_entry_flag=""
+          no_entry_flag=
         else
           aix_use_runtimelinking=no
 
           # Test if we are trying to use run time linking or normal
           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
           case $host_os in aix4.23|aix4.23.*|aix5-9*)
 	    for ld_flag in $LDFLAGS; do
 	      case $ld_flag in
@@ -12309,6 +12904,13 @@
 	        ;;
 	      esac
 	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
 	    ;;
           esac
 
@@ -12327,13 +12929,21 @@
         hardcode_direct_absolute_CXX=yes
         hardcode_libdir_separator_CXX=':'
         link_all_deplibs_CXX=yes
-        file_list_spec_CXX='${wl}-f,'
+        file_list_spec_CXX='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          hardcode_direct_CXX=no
+          hardcode_direct_absolute_CXX=no
+          ;;
+        esac
 
-        if test "$GXX" = yes; then
+        if test yes = "$GXX"; then
           case $host_os in aix4.012|aix4.012.*)
           # We only want to do this on AIX 4.2 and lower, the check
           # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -12351,36 +12961,44 @@
 	  fi
           esac
           shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
 	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
         else
           # not using gcc
-          if test "$host_cpu" = ia64; then
+          if test ia64 = "$host_cpu"; then
 	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	  # chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
           else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
 	    else
-	      shared_flag='${wl}-bM:SRE'
+	      shared_flag='$wl-bM:SRE'
 	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
           fi
         fi
 
-        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        export_dynamic_flag_spec_CXX='$wl-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
         always_export_symbols_CXX=yes
-        if test "$aix_use_runtimelinking" = yes; then
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
           # Warning - without using the other runtime loading flags (-brtl),
           # -berok will link without error, but may produce a broken library.
-          allow_undefined_flag_CXX='-berok'
+          # The "-G" linker flag allows undefined symbols.
+          no_undefined_flag_CXX='-bernotok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          if test "${lt_cv_aix_libpath+set}" = set; then
+          if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -12415,7 +13033,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__CXX"; then
-    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
   fi
 
 fi
@@ -12423,18 +13041,18 @@
   aix_libpath=$lt_cv_aix_libpath__CXX
 fi
 
-          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+          hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
 
-          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
         else
-          if test "$host_cpu" = ia64; then
-	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+          if test ia64 = "$host_cpu"; then
+	    hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
 	    allow_undefined_flag_CXX="-z nodefs"
-	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
-	    if test "${lt_cv_aix_libpath+set}" = set; then
+	    if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -12469,7 +13087,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__CXX"; then
-    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
   fi
 
 fi
@@ -12477,22 +13095,34 @@
   aix_libpath=$lt_cv_aix_libpath__CXX
 fi
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
-	    no_undefined_flag_CXX=' ${wl}-bernotok'
-	    allow_undefined_flag_CXX=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
+	    no_undefined_flag_CXX=' $wl-bernotok'
+	    allow_undefined_flag_CXX=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
 	      # We only use this code for GNU lds that support --whole-archive.
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    else
 	      # Exported symbols can be pulled into shared objects from archives
 	      whole_archive_flag_spec_CXX='$convenience'
 	    fi
 	    archive_cmds_need_lc_CXX=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	    archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\$, \$%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
           fi
         fi
         ;;
@@ -12502,7 +13132,7 @@
 	  allow_undefined_flag_CXX=unsupported
 	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	  # support --undefined.  This deserves some investigation.  FIXME
-	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 	else
 	  ld_shlibs_CXX=no
 	fi
@@ -12530,57 +13160,58 @@
 	  # Tell ltmain to make .lib files, not .a files.
 	  libext=lib
 	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
+	  shrext_cmds=.dll
 	  # FIXME: Setting linknames here is a bad hack.
-	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^	 *//'\''     -e '\''/^$;.*$*$/d'\''     -e '\''s/^$EXPORTS\|LIBRARY$$	 .*$*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
 	  # The linker will not automatically build a static lib if we build a DLL.
 	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
 	  enable_shared_with_static_runtimes_CXX=yes
 	  # Don't use ranlib
 	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
 	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
 	  ;;
 	*)
 	  # g++
 	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
 	  # as there is no search path for DLLs.
 	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+	  export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
 	  allow_undefined_flag_CXX=unsupported
 	  always_export_symbols_CXX=no
 	  enable_shared_with_static_runtimes_CXX=yes
 
 	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^	 *//'\''     -e '\''/^$;.*$*$/d'\''     -e '\''s/^$EXPORTS\|LIBRARY$$	 .*$*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	  else
 	    ld_shlibs_CXX=no
 	  fi
@@ -12594,27 +13225,27 @@
   hardcode_direct_CXX=no
   hardcode_automatic_CXX=yes
   hardcode_shlibpath_var_CXX=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec_CXX=''
   fi
   link_all_deplibs_CXX=yes
-  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  allow_undefined_flag_CXX=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+       if test yes != "$lt_cv_apple_cc_single_mod"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
     fi
 
   else
@@ -12623,6 +13254,34 @@
 
 	;;
 
+      os2*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+	hardcode_minus_L_CXX=yes
+	allow_undefined_flag_CXX=unsupported
+	shrext_cmds=.dll
+	archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^$.*$$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	enable_shared_with_static_runtimes_CXX=yes
+	;;
+
       dgux*)
         case $cc_basename in
           ec++*)
@@ -12657,18 +13316,15 @@
         ld_shlibs_CXX=yes
         ;;
 
-      gnu*)
-        ;;
-
       haiku*)
-        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
         link_all_deplibs_CXX=yes
         ;;
 
       hpux9*)
-        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
         hardcode_libdir_separator_CXX=:
-        export_dynamic_flag_spec_CXX='${wl}-E'
+        export_dynamic_flag_spec_CXX='$wl-E'
         hardcode_direct_CXX=yes
         hardcode_minus_L_CXX=yes # Not in the search PATH,
 				             # but as the default
@@ -12680,7 +13336,7 @@
             ld_shlibs_CXX=no
             ;;
           aCC*)
-            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
@@ -12689,11 +13345,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
-            if test "$GXX" = yes; then
-              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            if test yes = "$GXX"; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               ld_shlibs_CXX=no
@@ -12703,15 +13359,15 @@
         ;;
 
       hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        if test no = "$with_gnu_ld"; then
+	  hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
 	  hardcode_libdir_separator_CXX=:
 
           case $host_cpu in
             hppa*64*|ia64*)
               ;;
             *)
-	      export_dynamic_flag_spec_CXX='${wl}-E'
+	      export_dynamic_flag_spec_CXX='$wl-E'
               ;;
           esac
         fi
@@ -12737,13 +13393,13 @@
           aCC*)
 	    case $host_cpu in
 	      hppa*64*)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      ia64*)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      *)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	    esac
 	    # Commands to make compiler produce verbose output that lists
@@ -12754,20 +13410,20 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
 	        case $host_cpu in
 	          hppa*64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -12782,22 +13438,22 @@
       interix3-9*)
 	hardcode_direct_CXX=no
 	hardcode_shlibpath_var_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}-E'
+	hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='$wl-E'
 	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 	# Instead, shared libraries are loaded at an image base (0x10000000 by
 	# default) and relocated if they conflict, which is a slow very memory
 	# consuming and fragmenting process.  To avoid this, we pick a random,
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -12806,22 +13462,22 @@
 	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	      else
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
 	      fi
 	    fi
 	    link_all_deplibs_CXX=yes
 	    ;;
         esac
-        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
         hardcode_libdir_separator_CXX=:
         inherit_rpath_CXX=yes
         ;;
 
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -12829,8 +13485,8 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
@@ -12839,10 +13495,10 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -12856,59 +13512,59 @@
 	    # earlier do not add the objects themselves.
 	    case `$CC -V 2>&1` in
 	      *"Version 7."*)
-	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	      *)  # Version 8.0 or newer
 	        tmp_idyn=
 	        case $host_cpu in
 		  ia64*) tmp_idyn=' -i_dynamic';;
 		esac
-	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	    esac
 	    archive_cmds_need_lc_CXX=no
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    ;;
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
 	    *pgCC\ 1-5.* | *pgcpp\ 1-5.*)
 	      prelink_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      old_archive_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
 	      archive_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
 	      archive_expsym_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    *) # Version 6 and above use weak symbols
-	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    esac
 
-	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
-	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
 
 	    runpath_var=LD_RUN_PATH
 	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -12922,18 +13578,18 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
 	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
 	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+                cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
@@ -12941,10 +13597,10 @@
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      no_undefined_flag_CXX=' -zdefs'
-	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
 	      hardcode_libdir_flag_spec_CXX='-R$libdir'
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	      compiler_needs_object_CXX=yes
 
 	      # Not sure whether something based on
@@ -13002,22 +13658,17 @@
         ld_shlibs_CXX=yes
 	;;
 
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	ld_shlibs_CXX=no
-	;;
-
-      openbsd*)
+      openbsd* | bitrig*)
 	if test -f /usr/libexec/ld.so; then
 	  hardcode_direct_CXX=yes
 	  hardcode_shlibpath_var_CXX=no
 	  hardcode_direct_absolute_CXX=yes
 	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    export_dynamic_flag_spec_CXX='${wl}-E'
-	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='$wl-E'
+	    whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
 	  fi
 	  output_verbose_link_cmd=func_echo_all
 	else
@@ -13033,9 +13684,9 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
 	    hardcode_libdir_separator_CXX=:
 
 	    # Archives containing C++ object files must be created using
@@ -13053,17 +13704,17 @@
           cxx*)
 	    case $host in
 	      osf3*)
-	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	        allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
 		;;
 	      *)
 	        allow_undefined_flag_CXX=' -expect_unresolved \*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
 	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
 		;;
 	    esac
@@ -13078,21 +13729,21 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
 	      case $host in
 	        osf3*)
-	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	        *)
-	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	      esac
 
-	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
 	      hardcode_libdir_separator_CXX=:
 
 	      # Commands to make compiler produce verbose output that lists
@@ -13138,9 +13789,9 @@
 	    # Sun C++ 4.2, 5.x and Centerline C++
             archive_cmds_need_lc_CXX=yes
 	    no_undefined_flag_CXX=' -zdefs'
-	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	    hardcode_libdir_flag_spec_CXX='-R$libdir'
 	    hardcode_shlibpath_var_CXX=no
@@ -13148,7 +13799,7 @@
 	      solaris2.0-5 | solaris2.0-5.*) ;;
 	      *)
 		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
+		# but understands '-z linker_flag'.
 	        # Supported since Solaris 2.6 (maybe 2.5.1?)
 		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
 	        ;;
@@ -13165,30 +13816,30 @@
 	    ;;
           gcx*)
 	    # Green Hills C++ Compiler
-	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 
 	    # The C++ compiler must be used to create the archive.
 	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	    ;;
           *)
 	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      no_undefined_flag_CXX=' $wl-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
 	        # platform.
-	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
@@ -13196,11 +13847,11 @@
 	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
-	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
 	      case $host_os in
 		solaris2.0-5 | solaris2.0-5.*) ;;
 		*)
-		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 		  ;;
 	      esac
 	    fi
@@ -13209,52 +13860,52 @@
         ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.01.10* | unixware7* | sco3.2v5.0.024*)
-      no_undefined_flag_CXX='${wl}-z,text'
+      no_undefined_flag_CXX='$wl-z,text'
       archive_cmds_need_lc_CXX=no
       hardcode_shlibpath_var_CXX=no
       runpath_var='LD_RUN_PATH'
 
       case $cc_basename in
         CC*)
-	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
       esac
       ;;
 
       sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
+	# Note: We CANNOT use -z defs as we might desire, because we do not
 	# link with -lc, and that would cause any symbols used from libc to
 	# always be unresolved, which means just about no library would
 	# ever link correctly.  If we're not using GNU ld we use -z text
 	# though, which does catch some bad symbols but isn't as heavy-handed
 	# as -z defs.
-	no_undefined_flag_CXX='${wl}-z,text'
-	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	no_undefined_flag_CXX='$wl-z,text'
+	allow_undefined_flag_CXX='$wl-z,nodefs'
 	archive_cmds_need_lc_CXX=no
 	hardcode_shlibpath_var_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
 	hardcode_libdir_separator_CXX=':'
 	link_all_deplibs_CXX=yes
-	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	export_dynamic_flag_spec_CXX='$wl-Bexport'
 	runpath_var='LD_RUN_PATH'
 
 	case $cc_basename in
           CC*)
-	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
-	      '"$old_archive_cmds_CXX"
+              '"$old_archive_cmds_CXX"
 	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
-	      '"$reload_cmds_CXX"
+              '"$reload_cmds_CXX"
 	    ;;
 	  *)
-	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    ;;
 	esac
       ;;
@@ -13286,10 +13937,10 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
-    test "$ld_shlibs_CXX" = no && can_build_shared=no
+    test no = "$ld_shlibs_CXX" && can_build_shared=no
 
-    GCC_CXX="$GXX"
-    LD_CXX="$LD"
+    GCC_CXX=$GXX
+    LD_CXX=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -13333,13 +13984,13 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $prev$p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
 	 prev=$p
 	 continue
        fi
@@ -13355,16 +14006,16 @@
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
+	     compiler_lib_search_path_CXX=$prev$p
 	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
@@ -13372,9 +14023,9 @@
 	 esac
        else
 	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
+	   postdeps_CXX=$prev$p
 	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	   postdeps_CXX="${postdeps_CXX} $prev$p"
 	 fi
        fi
        prev=
@@ -13389,15 +14040,15 @@
 	 continue
        fi
 
-       if test "$pre_test_object_deps_done" = no; then
+       if test no = "$pre_test_object_deps_done"; then
 	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
+	   predep_objects_CXX=$p
 	 else
 	   predep_objects_CXX="$predep_objects_CXX $p"
 	 fi
        else
 	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
+	   postdep_objects_CXX=$p
 	 else
 	   postdep_objects_CXX="$postdep_objects_CXX $p"
 	 fi
@@ -13427,51 +14078,6 @@
   postdep_objects_CXX=
   postdeps_CXX=
   ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 esac
 
 
@@ -13480,7 +14086,7 @@
 esac
  compiler_lib_search_dirs_CXX=
 if test -n "${compiler_lib_search_path_CXX}"; then
- compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
 fi
 
 
@@ -13519,17 +14125,18 @@
 
 
   # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
+  if test yes = "$GXX"; then
     lt_prog_compiler_wl_CXX='-Wl,'
     lt_prog_compiler_static_CXX='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static_CXX='-Bstatic'
       fi
+      lt_prog_compiler_pic_CXX='-fPIC'
       ;;
 
     amigaos*)
@@ -13540,8 +14147,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -13556,6 +14163,11 @@
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_CXX='$wl-static'
+	;;
+      esac
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -13605,7 +14217,7 @@
     case $host_os in
       aix4-9*)
 	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	  # AIX 5 now supports IA64 processor
 	  lt_prog_compiler_static_CXX='-Bstatic'
 	else
@@ -13645,14 +14257,14 @@
 	case $cc_basename in
 	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
 	      lt_prog_compiler_pic_CXX='+Z'
 	    fi
 	    ;;
 	  aCC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
@@ -13681,7 +14293,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -13689,7 +14301,7 @@
 	    lt_prog_compiler_pic_CXX='-fPIC'
 	    ;;
 	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    # old Intel C++ for x86_64, which still supported -KPIC.
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-static'
@@ -13834,7 +14446,7 @@
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_CXX=
     ;;
@@ -13866,7 +14478,7 @@
   lt_cv_prog_compiler_pic_works_CXX=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -13896,7 +14508,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
     case $lt_prog_compiler_pic_CXX in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
@@ -13922,7 +14534,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -13941,13 +14553,13 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
     :
 else
     lt_prog_compiler_static_CXX=
@@ -14061,8 +14673,8 @@
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -14074,9 +14686,9 @@
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -14093,17 +14705,21 @@
   case $host_os in
   aix4-9*)
     # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
     else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B$^B*$$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
+    export_symbols_cmds_CXX=$ltdll_cmds
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
@@ -14123,7 +14739,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+test no = "$ld_shlibs_CXX" && can_build_shared=no
 
 with_gnu_ld_CXX=$with_gnu_ld
 
@@ -14140,7 +14756,7 @@
   # Assume -lc should be added
   archive_cmds_need_lc_CXX=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds_CXX in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -14268,7 +14884,7 @@
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -14285,14 +14901,16 @@
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix4-9*)
@@ -14300,41 +14918,91 @@
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.01 | aix4.01.*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -14344,18 +15012,18 @@
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/$^/*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/$^/*$\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -14363,8 +15031,8 @@
 bsdi45*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -14376,7 +15044,7 @@
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -14385,8 +15053,8 @@
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -14402,16 +15070,16 @@
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
 
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -14420,8 +15088,8 @@
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -14448,7 +15116,7 @@
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';c-zC-Z:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -14461,8 +15129,8 @@
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -14475,7 +15143,7 @@
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -14488,8 +15156,8 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -14501,8 +15169,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -14520,12 +15188,13 @@
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -14550,26 +15219,15 @@
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -14587,14 +15245,15 @@
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -14602,8 +15261,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -14612,8 +15271,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -14626,8 +15285,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -14638,7 +15297,7 @@
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -14646,8 +15305,8 @@
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -14666,8 +15325,8 @@
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -14676,13 +15335,33 @@
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_CXX='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -14726,7 +15405,12 @@
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^	 *hwcap	 /d;s/:,	/ /g;s/=^=*$//;s/=^= * / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -14746,12 +15430,12 @@
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -14761,7 +15445,7 @@
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -14770,58 +15454,68 @@
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.89 | openbsd2.89.*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -14832,8 +15526,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -14843,11 +15537,11 @@
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -14855,8 +15549,8 @@
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -14877,24 +15571,24 @@
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -14912,7 +15606,7 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -14920,8 +15614,8 @@
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -14931,20 +15625,32 @@
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
 
 
 
@@ -14987,15 +15693,15 @@
 hardcode_action_CXX=
 if test -n "$hardcode_libdir_flag_spec_CXX" ||
    test -n "$runpath_var_CXX" ||
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+   test yes = "$hardcode_automatic_CXX"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct_CXX" != no &&
+  if test no != "$hardcode_direct_CXX" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+     test no != "$hardcode_minus_L_CXX"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action_CXX=relink
   else
@@ -15010,12 +15716,12 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
 $as_echo "$hardcode_action_CXX" >&6; }
 
-if test "$hardcode_action_CXX" = relink ||
-   test "$inherit_rpath_CXX" = yes; then
+if test relink = "$hardcode_action_CXX" ||
+   test yes = "$inherit_rpath_CXX"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -15038,7 +15744,7 @@
   lt_cv_path_LD=$lt_save_path_LD
   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
 
 ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
@@ -15874,6 +16580,7 @@
 enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
 pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
 enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
 SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
 ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
 PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -15923,10 +16630,13 @@
 GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
 nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
 lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
 objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
 MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -15991,7 +16701,8 @@
 finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
 hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
 sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
 hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
 enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
 enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -16096,9 +16807,12 @@
 compiler \
 lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
 nm_file_list_spec \
+lt_cv_truncate_bin \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_pic \
 lt_prog_compiler_wl \
@@ -16164,7 +16878,7 @@
 compiler_lib_search_path_CXX; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *\\\\\\\`\\"\\\$*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -16191,7 +16905,8 @@
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
 reload_cmds_CXX \
 old_archive_cmds_CXX \
 old_archive_from_new_cmds_CXX \
@@ -16205,7 +16920,7 @@
 postlink_cmds_CXX; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *\\\\\\\`\\"\\\$*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -16214,19 +16929,16 @@
 done
 
 ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
 
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
 
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'
 
@@ -16942,55 +17654,52 @@
  ;;
     "libtool":C)
 
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 # The names of the tagged configurations supported by this script.
-available_tags="CXX "
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
 
 # ### BEGIN LIBTOOL CONFIG
 
@@ -17010,6 +17719,9 @@
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
 # Shell to use when invoking shell scripts.
 SHELL=$lt_SHELL
 
@@ -17127,18 +17839,27 @@
 # Transform the output of nm in a proper C declaration.
 global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
 # Transform the output of nm in a C name address pair.
 global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
 # Specify filename containing input files for \$NM.
 nm_file_list_spec=$lt_nm_file_list_spec
 
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
 lt_sysroot=$lt_sysroot
 
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
@@ -17229,8 +17950,11 @@
 # Compile-time system search path for libraries.
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
 
 # Whether dlopen is supported.
 dlopen_support=$enable_dlopen
@@ -17323,13 +18047,13 @@
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute
 
@@ -17395,13 +18119,72 @@
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR:DIR:"
+#       string "DIR DIR" will be prepended to VARIABLE
+# ":DIR:DIR"
+#       string "DIR DIR" will be appended to VARIABLE
+# "DIRP:DIRP::DIRA:DIRA"
+#       string "DIRP DIRP" will be prepended to VARIABLE and string
+#       "DIRA DIRA" will be appended to VARIABLE
+# "DIR:DIR"
+#       VARIABLE will be replaced by "DIR DIR"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *\\/compile | ccache | *\\/ccache ) ;;
+        distcc | *\\/distcc | purify | *\\/purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -17410,7 +18193,7 @@
   esac
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 
   # We use sed instead of cat because bash on DJGPP gets confused if
@@ -17420,165 +18203,6 @@
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
-  if test x"$xsi_shell" = xyes; then
-  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\    # positional parameters, so assign one to ordinary parameter first.\
-\    func_stripname_result=${3}\
-\    func_stripname_result=${func_stripname_result#"${1}"}\
-\    func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\    func_split_long_opt_name=${1%%=*}\
-\    func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\    func_split_short_opt_arg=${1#??}\
-\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\    case ${1} in\
-\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\      *)    func_lo2o_result=${1} ;;\
-\    esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
-    func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
-    func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
-    func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
-    eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\    func_quote_for_eval "${2}"\
-\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append $a-zA-Z_\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append $a-zA-Z_\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
@@ -17665,13 +18289,13 @@
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_CXX

atmos-2.97.9.tar.gz/third-party/yalpa/depcomp -> atmos-2.97.11.tar.gz/third-party/yalpa/depcomp Changed

atmos-2.97.9.tar.gz/third-party/yalpa/doc/Makefile.in -> atmos-2.97.11.tar.gz/third-party/yalpa/doc/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -78,7 +88,6 @@
 build_triplet = @build@
 host_triplet = @host@
 subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -86,6 +95,7 @@
 	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/yalpa/yalpa_config.h
 CONFIG_CLEAN_FILES =
@@ -110,6 +120,7 @@
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -154,6 +165,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -245,7 +257,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -420,6 +431,8 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/yalpa/include/Makefile.in -> atmos-2.97.11.tar.gz/third-party/yalpa/include/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -78,7 +88,6 @@
 build_triplet = @build@
 host_triplet = @host@
 subdir = include
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -86,6 +95,7 @@
 	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/yalpa/yalpa_config.h
 CONFIG_CLEAN_FILES =
@@ -145,6 +155,7 @@
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -214,6 +225,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -306,7 +318,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu include/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -601,6 +612,8 @@
 	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 	ps ps-am tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/yalpa/include/yalpa/Makefile.in -> atmos-2.97.11.tar.gz/third-party/yalpa/include/yalpa/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -79,8 +89,6 @@
 build_triplet = @build@
 host_triplet = @host@
 subdir = include/yalpa
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/yalpa_config.h.in $(yalpa_HEADERS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -88,6 +96,8 @@
 	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(yalpa_HEADERS) \
+	$(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = yalpa_config.h
 CONFIG_CLEAN_FILES =
@@ -160,6 +170,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/yalpa_config.h.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -204,6 +215,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -298,7 +310,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/yalpa/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu include/yalpa/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -318,8 +329,8 @@
 $(am__aclocal_m4_deps):
 
 yalpa_config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/yalpa_config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -560,6 +571,8 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
 	uninstall-am uninstall-yalpaHEADERS
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/yalpa/include/yalpa/yalpa_config.h.in -> atmos-2.97.11.tar.gz/third-party/yalpa/include/yalpa/yalpa_config.h.in Changed

atmos-2.97.9.tar.gz/third-party/yalpa/install-sh -> atmos-2.97.11.tar.gz/third-party/yalpa/install-sh Changed

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2016-01-11.22; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,17 +64,6 @@
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -97,7 +82,7 @@
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 OPTION... -T SRCFILE DSTFILE
@@ -137,46 +122,57 @@
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *''*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *''*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | =!) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | =!) dst_arg=./$dst_arg;;
+        esac
+        shift;;
 
-    -T) no_target_directory=true;;
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
-	break;;
+    --) shift
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
 
     *)  break;;
   esac
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -208,6 +204,15 @@
 fi
 
 if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
   trap "ret=130; $do_exit" 2
@@ -223,16 +228,16 @@
 
     *0-7)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -269,41 +274,15 @@
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
       fi
       dstdir=$dst
       dst=$dstdir/`basename "$src"`
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X$.*^/$//*^/^/*/*$' \| \
-	     X"$dst" : 'X$//$^/' \| \
-	     X"$dst" : 'X$//$$' \| \
-	     X"$dst" : 'X$/$' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X$.*^/$\/\/*^/^/*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/\/$^/.*/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/\/$$/{
-		   s//\1/
-		   q
-		 }
-		 /^X$\/$.*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
+      dstdir=`dirname "$dst"`
       test -d "$dstdir"
       dstdir_status=$?
     fi
@@ -314,74 +293,74 @@
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *23672367) mkdir_umask=$umask;;
-	  .*00202 | .0202 | .02) mkdir_umask=22;;
-
-	  *0-7)
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *1235670-70-7)
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *23672367) mkdir_umask=$umask;;
+          .*00202 | .0202 | .02) mkdir_umask=22;;
+
+          *0-7)
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *1235670-70-7)
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
@@ -391,53 +370,51 @@
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
-	-=!*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        -=!*) prefix='./';;
+        *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-	test X"$d" = X && continue
+        test X"$d" = X && continue
 
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -472,15 +449,12 @@
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
+       set +f &&
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -493,24 +467,24 @@
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
 
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
@@ -522,6 +496,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

atmos-2.97.9.tar.gz/third-party/yalpa/ltmain.sh -> atmos-2.97.11.tar.gz/third-party/yalpa/ltmain.sh Changed

@@ -1,9 +1,12 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
 
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -23,881 +26,2112 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Usage: $progname OPTION... MODE-ARG...
-#
-# Provide generalized library-building support services.
-#
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|^/*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
 
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
 	fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
 
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
 
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
 
 
+# func_path_progs PROGS_LIST CHECK_FUNC PATH
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
 : ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
 
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
 
-dirname="s,/^/*$,,"
-basename="s,^.*/,,"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
 
+sed_dirname='s|/^/*$||'
+sed_basename='s|^.*/||'
 
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|$`"$\\$|\\\1|g'
 
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/$"`\\$/\\\1/g'
 
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|.^$\\*\/|\\&|g'
 
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
 
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\$^$_G_bs\$$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
 
 
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/$^/*$.*$,\1,'
-pathcdr='s,^/^/*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
 
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
 
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME0} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
 
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
 
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
 
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
 
-# Make sure we have an absolute path for reexecution:
+# Make sure we have an absolute progpath for reexecution:
 case $progpath in
   \\/*|A-Za-z:\\*) ;;
   *\\/*)
-     progdir=$func_dirname_result
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
      progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
+     progpath=$progdir/$progname
      ;;
   *)
-     save_IFS="$IFS"
+     _G_IFS=$IFS
      IFS=${PATH_SEPARATOR-:}
      for progdir in $PATH; do
-       IFS="$save_IFS"
+       IFS=$_G_IFS
        test -x "$progdir/$progname" && break
      done
-     IFS="$save_IFS"
+     IFS=$_G_IFS
      test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
+     progpath=$progdir/$progname
      ;;
 esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/$`"$\\$/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/$"`\\$/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,.^$\\*\/,\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
 
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\$^$bs\$$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
 
-# Standard options:
 opt_dry_run=false
-opt_help=false
 opt_quiet=false
 opt_verbose=false
-opt_warning=:
 
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset='&#x1b;0m'
+        tc_bold='&#x1b;1m';   tc_standout='&#x1b;7m'
+        tc_red='&#x1b;31m';   tc_green='&#x1b;32m'
+        tc_blue='&#x1b;34m';  tc_cyan='&#x1b;36m'
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
 }
 
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      12.* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '$.$'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
 {
-    $opt_verbose && func_echo ${1+"$@"}
+    $debug_cmd
 
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
 }
 
-# func_echo_all arg...
+
+# func_echo_all ARG...
+# --------------------
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
     $ECHO "$*"
 }
 
-# func_error arg...
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
 # Echo program name prefixed message to standard error.
 func_error ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+    $debug_cmd
 
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+    $require_term_colors
 
-    # bash bug again:
-    :
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
 }
 
-# func_fatal_error arg...
+
+# func_fatal_error ARG...
+# -----------------------
 # Echo program name prefixed message to standard error, and exit.
 func_fatal_error ()
 {
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
+    $debug_cmd
 
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
+    func_error "$*"
+    exit $EXIT_FAILURE
 }
-help="Try \`$progname --help' for more information."  ## default
 
 
-# func_grep expression filename
+# func_grep EXPRESSION FILENAME
+# -----------------------------
 # Check whether EXPRESSION matches any line of FILENAME, without output.
 func_grep ()
 {
+    $debug_cmd
+
     $GREP "$1" "$2" >/dev/null 2>&1
 }
 
 
-# func_mkdir_p directory-path
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
 # Make sure the entire path to DIRECTORY-PATH is available.
 func_mkdir_p ()
 {
-    my_directory_path="$1"
-    my_dir_list=
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
 
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
 
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
       esac
 
       # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
+      while test ! -d "$_G_directory_path"; do
         # ...make a list in topmost first order.  Use a colon delimited
 	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
+        _G_dir_list=$_G_directory_path:$_G_dir_list
 
         # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
+        case $_G_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
       done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
 
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
         # try to create one of the directories concurrently.  Don't
         # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
+        $MKDIR "$_G_dir" 2>/dev/null || :
       done
-      IFS="$save_mkdir_p_IFS"
+      IFS=$func_mkdir_p_IFS
 
       # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
     fi
 }
 
 
-# func_mktempdir string
+# func_mktempdir BASENAME
+# -------------------------
 # Make a temporary directory that won't clash with other running
 # libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
+# given, BASENAME is the basename for that directory.
 func_mktempdir ()
 {
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
+    $debug_cmd
 
-    if test "$opt_dry_run" = ":"; then
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+    if test : = "$opt_dry_run"; then
       # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
+      _G_tmpdir=$_G_template-$$
     else
 
       # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
 
-      if test ! -d "$my_tmpdir"; then
+      if test ! -d "$_G_tmpdir"; then
         # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
 
-        save_mktempdir_umask=`umask`
+        func_mktempdir_umask=`umask`
         umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
       fi
 
       # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
     fi
 
-    $ECHO "$my_tmpdir"
+    $ECHO "$_G_tmpdir"
 }
 
 
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
 {
-    case $1 in
-      *\\\`\"\$*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
+    $debug_cmd
 
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *\\~\#\^\&\*\{\}\|\;\<\>\?\'\ \	*|**|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/$^/*$.*$|\1|'
+    _G_pathcdr='s|^/^/*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
         ;;
       *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
     esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
 }
 
 
-# func_quote_for_expand arg
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
+func_quote_for_eval ()
+{
+    $debug_cmd
+
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *\\\`\"\$*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *\\~\#\^\&\*\{\}\|\;\<\>\?\'\ \	*|**|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()
 {
+    $debug_cmd
+
     case $1 in
       *\\\`\"*)
-	my_arg=`$ECHO "$1" | $SED \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
-        my_arg="$1" ;;
+        _G_arg=$1 ;;
     esac
 
-    case $my_arg in
+    case $_G_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *\\~\#\^\&\*\{\}\|\;\<\>\?\'\ \	*|**|"")
-        my_arg="\"$my_arg\""
+        _G_arg=\"$_G_arg\"
         ;;
     esac
 
-    func_quote_for_expand_result="$my_arg"
+    func_quote_for_expand_result=$_G_arg
 }
 
 
-# func_show_eval cmd fail_exp
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD FAIL_EXP
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()
 {
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
+    $debug_cmd
 
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
 
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
       fi
-    fi
+    }
 }
 
 
-# func_show_eval_locale cmd fail_exp
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# func_show_eval_locale CMD FAIL_EXP
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.  Use the saved locale for evaluation.
 func_show_eval_locale ()
 {
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
 
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
       fi
-    fi
+    }
 }
 
+
 # func_tr_sh
+# ----------
 # Turn $1 into a string suitable for a shell variable name.
 # Result is stored in $func_tr_sh_result.  All characters
 # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
 # if $1 begins with a digit, a '_' is prepended as well.
 func_tr_sh ()
 {
-  case $1 in
-  0-9* | *!a-zA-Z0-9_*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^$0-9$/_\1/; s/^a-zA-Z0-9_/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
+    $debug_cmd
+
+    case $1 in
+    0-9* | *!a-zA-Z0-9_*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^$0-9$/_\1/' -e 's/^a-zA-Z0-9_/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
 }
 
 
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/$(C)$ 0-9,-*$ 1-90-9*$/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
+    $opt_verbose && func_echo "$*"
+
+    :
 }
 
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    echo
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath OPTION...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY all
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
 }
 
-# func_help NOEXIT
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME ARG...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options ARG...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep ARG...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options ARG...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options ARG...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
 func_help ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-	:print
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
-	p
-	d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
 }
 
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {
-    $opt_debug
+    $debug_cmd
 
-    func_error "missing argument for $1."
+    func_error "Missing argument for '$1'."
     exit_cmd=exit
 }
 
 
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x$^=*$'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x^=*=$.*$$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
 # Set func_split_short_opt_name and func_split_short_opt_arg shell
 # variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-$.$'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.$.*$$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
 {
-    my_sed_short_opt='1s/^$..$.*$/\1/;q'
-    my_sed_short_rest='1s/^..$.*$$/\1/;q'
+    $debug_cmd
 
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
 
 
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
 {
-    my_sed_long_opt='1s/^$--^=*$=.*/\1/;q'
-    my_sed_long_arg='1s/^--^=*=//'
+    $debug_cmd
 
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
 
-exit_cmd=:
 
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $debug_cmd
 
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|$(C)$ 0-9,-* ,-$1-90-9* $|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
 
+    exit $?
+}
 
 
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
 
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
 
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
 
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
 {
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+    $debug_cmd
 
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
 
 
-# func_arith arithmetic-term...
-func_arith ()
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
 {
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+    $debug_cmd
 
+    $warning_func ${1+"$@"}
+}
 
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
 
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath OPTION... MODE-ARG...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY all
+   -h, --help, --help-all   print short, long, or detailed help message
+"
 
-# func_lo2o object
-func_lo2o ()
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
 {
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+    $debug_cmd
 
+    func_usage_message
+    $ECHO "$long_help_message
 
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.^.*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
+MODE must be one of the following:
 
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
 
-# func_fatal_configuration arg...
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.^.*$|.lo|'`
+  }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
+    func__fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
 }
 
 
 # func_config
+# -----------
 # Display the configuration for all the tags in this script.
 func_config ()
 {
@@ -915,17 +2149,19 @@
     exit $?
 }
 
+
 # func_features
+# -------------
 # Display the features supported by this script.
 func_features ()
 {
     echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
+    if test yes = "$build_libtool_libs"; then
       echo "enable shared libraries"
     else
       echo "disable shared libraries"
     fi
-    if test "$build_old_libs" = yes; then
+    if test yes = "$build_old_libs"; then
       echo "enable static libraries"
     else
       echo "disable static libraries"
@@ -934,314 +2170,350 @@
     exit $?
 }
 
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
-  # Global variable:
-  tagname="$1"
+    # Global variable:
+    tagname=$1
 
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
-  # Validate tagname.
-  case $tagname in
-    *!-_A-Za-z0-9,/*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+    # Validate tagname.
+    case $tagname in
+      *!-_A-Za-z0-9,/*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
 
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
     *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
 
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
 }
 
+
 # func_check_version_match
+# ------------------------
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
 func_check_version_match ()
 {
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from an older release.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-      else
-        cat >&2 <<_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 $progname: of $PACKAGE $VERSION and run autoconf again.
 _LT_EOF
-    fi
+      fi
 
-    exit $EXIT_MISMATCH
-  fi
+      exit $EXIT_MISMATCH
+    fi
 }
 
 
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
+# libtool_options_prep ARG...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
 
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
 
+    nonopt=
+    preserve_args=
 
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    esac
 
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
 
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
-  # this just eases exit handling
-  while test $# -gt 0; do
-    opt="$1"
-    shift
-    case $opt in
-      --debug|-x)	opt_debug='set -x'
-			func_echo "enabling shell trace mode"
-			$opt_debug
-			;;
-      --dry-run|--dryrun|-n)
-			opt_dry_run=:
-			;;
-      --config)
-			opt_config=:
-func_config
-			;;
-      --dlopen|-dlopen)
-			optarg="$1"
-			opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
-			shift
-			;;
-      --preserve-dup-deps)
-			opt_preserve_dup_deps=:
-			;;
-      --features)
-			opt_features=:
-func_features
-			;;
-      --finish)
-			opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-			;;
-      --help)
-			opt_help=:
-			;;
-      --help-all)
-			opt_help_all=:
-opt_help=': help-all'
-			;;
-      --mode)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
-			shift
-			;;
-      --no-silent|--no-quiet)
-			opt_silent=false
-func_append preserve_args " $opt"
-			;;
-      --no-warning|--no-warn)
-			opt_warning=false
-func_append preserve_args " $opt"
-			;;
-      --no-verbose)
-			opt_verbose=false
-func_append preserve_args " $opt"
-			;;
-      --silent|--quiet)
-			opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
-			;;
-      --verbose|-v)
-			opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
-			;;
-      --tag)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
-			shift
-			;;
-
-      -\?|-h)		func_usage				;;
-      --help)		func_help				;;
-      --version)	func_version				;;
-
-      # Separate optargs to long options:
-      --*=*)
-			func_split_long_opt "$opt"
-			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-			func_split_short_opt "$opt"
-			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      --)		break					;;
-      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
-      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
-    esac
-  done
 
-  # Validate options:
+# libtool_parse_options ARG...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
 
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
 
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
 
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-      ;;
-  esac
 
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
 
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
-    fi
 
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
 
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
+# libtool_validate_options ARG...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
     fi
 
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
 
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
 
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
 }
+func_add_hook func_validate_options libtool_validate_options
 
 
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
 
 
 ## ----------- ##
 ##    Main.    ##
 ## ----------- ##
 
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
 # func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_lalib_p ()
 {
     test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
 }
 
 # func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
 # This function implements the same check as func_lalib_p without
 # resorting to external programs.  To this end, it redirects stdin and
 # closes it afterwards, without saving the original file descriptor.
 # As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
+# fatal anyway.  Works if 'file' does not exist.
 func_lalib_unsafe_p ()
 {
     lalib_p=no
@@ -1249,13 +2521,13 @@
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
-	    case "$lalib_p_line" in
+	    case $lalib_p_line in
 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 	    esac
 	done
 	exec 0<&5 5<&-
     fi
-    test "$lalib_p" = yes
+    test yes = "$lalib_p"
 }
 
 # func_ltwrapper_script_p file
@@ -1264,7 +2536,8 @@
 # determined imposters.
 func_ltwrapper_script_p ()
 {
-    func_lalib_p "$1"
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
 }
 
 # func_ltwrapper_executable_p file
@@ -1289,7 +2562,7 @@
 {
     func_dirname_and_basename "$1" "" "."
     func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
 }
 
 # func_ltwrapper_p file
@@ -1308,11 +2581,13 @@
 # FAIL_CMD may read-access the current command in variable CMD!
 func_execute_cmds ()
 {
-    $opt_debug
+    $debug_cmd
+
     save_ifs=$IFS; IFS='~'
     for cmd in $1; do
-      IFS=$save_ifs
+      IFS=$sp$nl
       eval cmd=\"$cmd\"
+      IFS=$save_ifs
       func_show_eval "$cmd" "${2-:}"
     done
     IFS=$save_ifs
@@ -1324,10 +2599,11 @@
 # Note that it is not necessary on cygwin/mingw to append a dot to
 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
 func_source ()
 {
-    $opt_debug
+    $debug_cmd
+
     case $1 in
     */* | *\\*)	. "$1" ;;
     *)		. "./$1" ;;
@@ -1354,10 +2630,10 @@
 # store the result into func_replace_sysroot_result.
 func_replace_sysroot ()
 {
-  case "$lt_sysroot:$1" in
+  case $lt_sysroot:$1 in
   ?*:"$lt_sysroot"*)
     func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
+    func_replace_sysroot_result='='$func_stripname_result
     ;;
   *)
     # Including no sysroot.
@@ -1374,7 +2650,8 @@
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
-    $opt_debug
+    $debug_cmd
+
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
@@ -1393,7 +2670,7 @@
 	for z in $available_tags; do
 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
@@ -1418,7 +2695,7 @@
 	# line option must be used.
 	if test -z "$tagname"; then
 	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
+	  func_fatal_error "specify a tag with '--tag'"
 #	else
 #	  func_verbose "using $tagname tagged configuration"
 	fi
@@ -1434,15 +2711,15 @@
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
     else
       write_lobj=none
     fi
 
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
     else
       write_oldobj=none
     fi
@@ -1450,7 +2727,7 @@
     $opt_dry_run || {
       cat >${write_libobj}T <<EOF
 # $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -1462,7 +2739,7 @@
 non_pic_object=$write_oldobj
 
 EOF
-      $MV "${write_libobj}T" "${write_libobj}"
+      $MV "${write_libobj}T" "$write_libobj"
     }
 }
 
@@ -1482,8 +2759,9 @@
 # be empty on error (or when ARG is empty)
 func_convert_core_file_wine_to_w32 ()
 {
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
   if test -n "$1"; then
     # Unfortunately, winepath does not exit with a non-zero error code, so we
     # are forced to check the contents of stdout. On the other hand, if the
@@ -1491,9 +2769,9 @@
     # *an error message* to stdout. So we must check for both error code of
     # zero AND non-empty stdout, which explains the odd construction:
     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
+        $SED -e "$sed_naive_backslashify"`
     else
       func_convert_core_file_wine_to_w32_result=
     fi
@@ -1514,18 +2792,19 @@
 # are convertible, then the result may be empty.
 func_convert_core_path_wine_to_w32 ()
 {
-  $opt_debug
+  $debug_cmd
+
   # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
+  func_convert_core_path_wine_to_w32_result=
   if test -n "$1"; then
     oldIFS=$IFS
     IFS=:
     for func_convert_core_path_wine_to_w32_f in $1; do
       IFS=$oldIFS
       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
         if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
         else
           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
         fi
@@ -1554,7 +2833,8 @@
 # environment variable; do not put it in $PATH.
 func_cygpath ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
     if test "$?" -ne 0; then
@@ -1563,7 +2843,7 @@
     fi
   else
     func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
   fi
 }
 #end: func_cygpath
@@ -1574,10 +2854,11 @@
 # result in func_convert_core_msys_to_w32_result.
 func_convert_core_msys_to_w32 ()
 {
-  $opt_debug
+  $debug_cmd
+
   # awkward: cmd appends spaces to result
   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/ *$//' -e "$lt_sed_naive_backslashify"`
+    $SED -e 's/ *$//' -e "$sed_naive_backslashify"`
 }
 #end: func_convert_core_msys_to_w32
 
@@ -1588,13 +2869,14 @@
 # func_to_host_file_result to ARG1).
 func_convert_file_check ()
 {
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
     func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
+    func_error "  '$1'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback:
-    func_to_host_file_result="$1"
+    func_to_host_file_result=$1
   fi
 }
 # end func_convert_file_check
@@ -1606,10 +2888,11 @@
 # func_to_host_file_result to a simplistic fallback value (see below).
 func_convert_path_check ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -z "$4" && test -n "$3"; then
     func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
+    func_error "  '$3'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback.  This is a deliberately simplistic "conversion" and
     # should not be "improved".  See libtool.info.
@@ -1618,7 +2901,7 @@
       func_to_host_path_result=`echo "$3" |
         $SED -e "$lt_replace_pathsep_chars"`
     else
-      func_to_host_path_result="$3"
+      func_to_host_path_result=$3
     fi
   fi
 }
@@ -1630,9 +2913,10 @@
 # and appending REPL if ORIG matches BACKPAT.
 func_convert_path_front_back_pathsep ()
 {
-  $opt_debug
+  $debug_cmd
+
   case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
     ;;
   esac
   case $4 in
@@ -1646,7 +2930,7 @@
 ##################################################
 # $build to $host FILE NAME CONVERSION FUNCTIONS #
 ##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # Result will be available in $func_to_host_file_result.
@@ -1657,7 +2941,8 @@
 # in func_to_host_file_result.
 func_to_host_file ()
 {
-  $opt_debug
+  $debug_cmd
+
   $to_host_file_cmd "$1"
 }
 # end func_to_host_file
@@ -1669,7 +2954,8 @@
 # in (the comma separated) LAZY, no conversion takes place.
 func_to_tool_file ()
 {
-  $opt_debug
+  $debug_cmd
+
   case ,$2, in
     *,"$to_tool_file_cmd",*)
       func_to_tool_file_result=$1
@@ -1687,7 +2973,7 @@
 # Copy ARG to func_to_host_file_result.
 func_convert_file_noop ()
 {
-  func_to_host_file_result="$1"
+  func_to_host_file_result=$1
 }
 # end func_convert_file_noop
 
@@ -1698,11 +2984,12 @@
 # func_to_host_file_result.
 func_convert_file_msys_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1714,8 +3001,9 @@
 # func_to_host_file_result.
 func_convert_file_cygwin_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
     # LT_CYGPATH in this case.
@@ -1731,11 +3019,12 @@
 # and a working winepath. Returns result in func_to_host_file_result.
 func_convert_file_nix_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1747,12 +3036,13 @@
 # Returns result in func_to_host_file_result.
 func_convert_file_msys_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
+    func_to_host_file_result=$func_cygpath_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1765,13 +3055,14 @@
 # in func_to_host_file_result.
 func_convert_file_nix_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
     func_convert_core_file_wine_to_w32 "$1"
     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
+    func_to_host_file_result=$func_cygpath_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1781,7 +3072,7 @@
 #############################################
 # $build to $host PATH CONVERSION FUNCTIONS #
 #############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # The result will be available in $func_to_host_path_result.
@@ -1805,10 +3096,11 @@
 to_host_path_cmd=
 func_init_to_host_path_cmd ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -z "$to_host_path_cmd"; then
     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
   fi
 }
 
@@ -1818,7 +3110,8 @@
 # in func_to_host_path_result.
 func_to_host_path ()
 {
-  $opt_debug
+  $debug_cmd
+
   func_init_to_host_path_cmd
   $to_host_path_cmd "$1"
 }
@@ -1829,7 +3122,7 @@
 # Copy ARG to func_to_host_path_result.
 func_convert_path_noop ()
 {
-  func_to_host_path_result="$1"
+  func_to_host_path_result=$1
 }
 # end func_convert_path_noop
 
@@ -1840,8 +3133,9 @@
 # func_to_host_path_result.
 func_convert_path_msys_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from ARG.  MSYS
     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -1849,7 +3143,7 @@
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1863,8 +3157,9 @@
 # func_to_host_file_result.
 func_convert_path_cygwin_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
@@ -1883,14 +3178,15 @@
 # a working winepath.  Returns result in func_to_host_file_result.
 func_convert_path_nix_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1904,15 +3200,16 @@
 # Returns result in func_to_host_file_result.
 func_convert_path_msys_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
+    func_to_host_path_result=$func_cygpath_result
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1927,8 +3224,9 @@
 # func_to_host_file_result.
 func_convert_path_nix_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from
     # ARG. msys behavior is inconsistent here, cygpath turns them
@@ -1937,7 +3235,7 @@
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
+    func_to_host_path_result=$func_cygpath_result
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1946,13 +3244,31 @@
 # end func_convert_path_nix_to_cygwin
 
 
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^	 *//' \
+    -e '/^$;.*$*$/d' \
+    -e 's/^$EXPORTS\|LIBRARY$$	 .*$*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
 # func_mode_compile arg...
 func_mode_compile ()
 {
-    $opt_debug
+    $debug_cmd
+
     # Get the compilation command and the source file.
     base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
     suppress_opt=yes
     suppress_output=
     arg_mode=normal
@@ -1965,12 +3281,12 @@
       case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
+	lastarg=$arg
 	arg_mode=normal
 	;;
 
       target )
-	libobj="$arg"
+	libobj=$arg
 	arg_mode=normal
 	continue
 	;;
@@ -1980,7 +3296,7 @@
 	case $arg in
 	-o)
 	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
+	    func_fatal_error "you cannot specify '-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
@@ -2009,12 +3325,12 @@
 	  func_stripname '-Wc,' '' "$arg"
 	  args=$func_stripname_result
 	  lastarg=
-	  save_ifs="$IFS"; IFS=','
+	  save_ifs=$IFS; IFS=,
 	  for arg in $args; do
-	    IFS="$save_ifs"
+	    IFS=$save_ifs
 	    func_append_quoted lastarg "$arg"
 	  done
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result
 
@@ -2027,8 +3343,8 @@
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
+	  lastarg=$srcfile
+	  srcfile=$arg
 	  ;;
 	esac  #  case $arg
 	;;
@@ -2043,13 +3359,13 @@
       func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      func_fatal_error "you must specify a target with \`-o'"
+      func_fatal_error "you must specify a target with '-o'"
       ;;
     *)
       # Get the name of the library object.
       test -z "$libobj" && {
 	func_basename "$srcfile"
-	libobj="$func_basename_result"
+	libobj=$func_basename_result
       }
       ;;
     esac
@@ -2069,7 +3385,7 @@
     case $libobj in
     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      func_fatal_error "cannot determine name of library object from '$libobj'"
       ;;
     esac
 
@@ -2078,8 +3394,8 @@
     for arg in $later; do
       case $arg in
       -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
 	build_old_libs=no
 	continue
 	;;
@@ -2105,17 +3421,17 @@
     func_quote_for_eval "$libobj"
     test "X$libobj" != "X$func_quote_for_eval_result" \
       && $ECHO "X$libobj" | $GREP '~#^*{};<>?"'"'"'	 &()|`$' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
     func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
 
     test -z "$base_compile" && \
       func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
+    if test yes = "$build_old_libs"; then
       removelist="$obj $lobj $libobj ${libobj}T"
     else
       removelist="$lobj $libobj ${libobj}T"
@@ -2127,16 +3443,16 @@
       pic_mode=default
       ;;
     esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.^.*$%%'`.${objext}
-      lockfile="$output_obj.lock"
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.^.*$%%'`.$objext
+      lockfile=$output_obj.lock
     else
       output_obj=
       need_locks=no
@@ -2145,12 +3461,12 @@
 
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
+    if test yes = "$need_locks"; then
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
-    elif test "$need_locks" = warn; then
+    elif test warn = "$need_locks"; then
       if test -f "$lockfile"; then
 	$ECHO "\
 *** ERROR, $lockfile exists and contains:
@@ -2158,7 +3474,7 @@
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2180,11 +3496,11 @@
     qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
+    if test yes = "$build_libtool_libs"; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
-      if test "$pic_mode" != no; then
+      if test no != "$pic_mode"; then
 	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
@@ -2201,7 +3517,7 @@
       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
-      if test "$need_locks" = warn &&
+      if test warn = "$need_locks" &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -2212,7 +3528,7 @@
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2228,20 +3544,20 @@
       fi
 
       # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
+      if test yes = "$suppress_opt"; then
 	suppress_output=' >/dev/null 2>&1'
       fi
     fi
 
     # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
 	# Don't build PIC code
 	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
-      if test "$compiler_c_o" = yes; then
+      if test yes = "$compiler_c_o"; then
 	func_append command " -o $obj"
       fi
 
@@ -2250,7 +3566,7 @@
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
-      if test "$need_locks" = warn &&
+      if test warn = "$need_locks" &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -2261,7 +3577,7 @@
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2281,7 +3597,7 @@
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
+      if test no != "$need_locks"; then
 	removelist=$lockfile
         $RM "$lockfile"
       fi
@@ -2291,7 +3607,7 @@
 }
 
 $opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -2311,7 +3627,7 @@
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
@@ -2330,16 +3646,16 @@
   -no-suppress      do not suppress compiler output for multiple passes
   -prefer-pic       try to build PIC objects only
   -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
   -Wc,FLAG          pass FLAG directly to the compiler
 
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
         ;;
 
       execute)
@@ -2352,7 +3668,7 @@
 
   -dlopen FILE      add the directory containing FILE to the library path
 
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
@@ -2371,7 +3687,7 @@
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
@@ -2381,7 +3697,7 @@
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
@@ -2407,7 +3723,7 @@
   -avoid-version    do not add a version suffix if possible
   -bindir BINDIR    specify path to binaries directory (for systems where
                     libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
@@ -2421,7 +3737,8 @@
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
@@ -2441,20 +3758,20 @@
   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
 
-Every other argument is treated as a filename.  Files ending in \`.la' are
+Every other argument is treated as a filename.  Files ending in '.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
 required, except when creating a convenience library.
 
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
 
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
@@ -2465,7 +3782,7 @@
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
@@ -2473,17 +3790,17 @@
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
+        func_fatal_help "invalid operation mode '$opt_mode'"
         ;;
     esac
 
     echo
-    $ECHO "Try \`$progname --help' for more information about other modes."
+    $ECHO "Try '$progname --help' for more information about other modes."
 }
 
 # Now that we've collected a possible --mode arg, show help if necessary
 if $opt_help; then
-  if test "$opt_help" = :; then
+  if test : = "$opt_help"; then
     func_mode_help
   else
     {
@@ -2491,7 +3808,7 @@
       for opt_mode in compile link execute install finish uninstall clean; do
 	func_mode_help
       done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
@@ -2499,7 +3816,7 @@
 	func_mode_help
       done
     } |
-    sed '1d
+    $SED '1d
       /^When reporting/,/^Report/{
 	H
 	d
@@ -2516,16 +3833,17 @@
 # func_mode_execute arg...
 func_mode_execute ()
 {
-    $opt_debug
+    $debug_cmd
+
     # The first argument is the command name.
-    cmd="$nonopt"
+    cmd=$nonopt
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
     for file in $opt_dlopen; do
       test -f "$file" \
-	|| func_fatal_help "\`$file' is not a file"
+	|| func_fatal_help "'$file' is not a file"
 
       dir=
       case $file in
@@ -2535,7 +3853,7 @@
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
 
 	# Read the libtool library.
 	dlname=
@@ -2546,18 +3864,18 @@
 	if test -z "$dlname"; then
 	  # Warn if it was a shared library.
 	  test -n "$library_names" && \
-	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	    func_warning "'$file' was not linked with '-export-dynamic'"
 	  continue
 	fi
 
 	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 
 	if test -f "$dir/$objdir/$dlname"; then
 	  func_append dir "/$objdir"
 	else
 	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
 	  fi
 	fi
 	;;
@@ -2565,18 +3883,18 @@
       *.lo)
 	# Just add the directory containing the .lo file.
 	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 	;;
 
       *)
-	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
       esac
 
       # Get the absolute pathname.
       absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
+      test -n "$absdir" && dir=$absdir
 
       # Now add the directory to shlibpath_var.
       if eval "test -z \"\$$shlibpath_var\""; then
@@ -2588,7 +3906,7 @@
 
     # This variable tells wrapper scripts just to set shlibpath_var
     # rather than running their programs.
-    libtool_execute_magic="$magic"
+    libtool_execute_magic=$magic
 
     # Check if any of the arguments is a wrapper script.
     args=
@@ -2601,12 +3919,12 @@
 	if func_ltwrapper_script_p "$file"; then
 	  func_source "$file"
 	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
+	  file=$progdir/$program
 	elif func_ltwrapper_executable_p "$file"; then
 	  func_ltwrapper_scriptname "$file"
 	  func_source "$func_ltwrapper_scriptname_result"
 	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
+	  file=$progdir/$program
 	fi
 	;;
       esac
@@ -2614,7 +3932,15 @@
       func_append_quoted args "$file"
     done
 
-    if test "X$opt_dry_run" = Xfalse; then
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
       if test -n "$shlibpath_var"; then
 	# Export the shlibpath_var.
 	eval "export $shlibpath_var"
@@ -2631,25 +3957,18 @@
       done
 
       # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
+      exec_cmd=\$cmd$args
     fi
 }
 
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
-    $opt_debug
+    $debug_cmd
+
     libs=
     libdirs=
     admincmds=
@@ -2663,11 +3982,11 @@
 	if func_lalib_unsafe_p "$opt"; then
 	  func_append libs " $opt"
 	else
-	  func_warning "\`$opt' is not a valid libtool archive"
+	  func_warning "'$opt' is not a valid libtool archive"
 	fi
 
       else
-	func_fatal_error "invalid argument \`$opt'"
+	func_fatal_error "invalid argument '$opt'"
       fi
     done
 
@@ -2682,12 +4001,12 @@
       # Remove sysroot references
       if $opt_dry_run; then
         for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
         done
       else
         tmpdir=`func_mktempdir`
         for lib in $libs; do
-	  sed -e "${sysroot_cmd} s/$ '-LR$=/\1/g; s/$ '$=/\1/g" $lib \
+	  $SED -e "$sysroot_cmd s/$ '-LR$=/\1/g; s/$ '$=/\1/g" $lib \
 	    > $tmpdir/tmp-la
 	  mv -f $tmpdir/tmp-la $lib
 	done
@@ -2712,7 +4031,7 @@
     fi
 
     # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
+    $opt_quiet && exit $EXIT_SUCCESS
 
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       echo "----------------------------------------------------------------------"
@@ -2723,27 +4042,27 @@
       echo
       echo "If you ever happen to want to link against installed libraries"
       echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
       echo "flag during linking and do at least one of the following:"
       if test -n "$shlibpath_var"; then
-	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
 	echo "     during execution"
       fi
       if test -n "$runpath_var"; then
-	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
 	echo "     during linking"
       fi
       if test -n "$hardcode_libdir_flag_spec"; then
 	libdir=LIBDIR
 	eval flag=\"$hardcode_libdir_flag_spec\"
 
-	$ECHO "   - use the \`$flag' linker flag"
+	$ECHO "   - use the '$flag' linker flag"
       fi
       if test -n "$admincmds"; then
 	$ECHO "   - have your system administrator run these commands:$admincmds"
       fi
       if test -f /etc/ld.so.conf; then
-	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
       fi
       echo
 
@@ -2762,18 +4081,20 @@
     exit $EXIT_SUCCESS
 }
 
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
 func_mode_install ()
 {
-    $opt_debug
+    $debug_cmd
+
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2800,7 +4121,7 @@
     opts=
     prev=
     install_type=
-    isdir=no
+    isdir=false
     stripme=
     no_mode=:
     for arg
@@ -2813,7 +4134,7 @@
       fi
 
       case $arg in
-      -d) isdir=yes ;;
+      -d) isdir=: ;;
       -f)
 	if $install_cp; then :; else
 	  prev=$arg
@@ -2831,7 +4152,7 @@
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
 	    arg2=$install_override_mode
 	    no_mode=false
 	  fi
@@ -2856,7 +4177,7 @@
       func_fatal_help "you must specify an install program"
 
     test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
+      func_fatal_help "the '$prev' option requires an argument"
 
     if test -n "$install_override_mode" && $no_mode; then
       if $install_cp; then :; else
@@ -2878,19 +4199,19 @@
     dest=$func_stripname_result
 
     # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
       destname=
     else
       func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
+      destdir=$func_dirname_result
+      destname=$func_basename_result
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files; shift
       test "$#" -gt 1 && \
-	func_fatal_help "\`$dest' is not a directory"
+	func_fatal_help "'$dest' is not a directory"
     fi
     case $destdir in
     \\/* | A-Za-z:\\/*) ;;
@@ -2899,7 +4220,7 @@
 	case $file in
 	*.lo) ;;
 	*)
-	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  func_fatal_help "'$destdir' must be an absolute directory name"
 	  ;;
 	esac
       done
@@ -2908,7 +4229,7 @@
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic="$magic"
+    libtool_install_magic=$magic
 
     staticlibs=
     future_libdirs=
@@ -2928,7 +4249,7 @@
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$file' is not a valid libtool archive"
+	  || func_fatal_help "'$file' is not a valid libtool archive"
 
 	library_names=
 	old_library=
@@ -2950,7 +4271,7 @@
 	fi
 
 	func_dirname "$file" "/" ""
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 	func_append dir "$objdir"
 
 	if test -n "$relink_command"; then
@@ -2964,7 +4285,7 @@
 	  # are installed into $libdir/../bin (currently, that works fine)
 	  # but it's something to keep an eye on.
 	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
@@ -2973,29 +4294,36 @@
 	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
-	  func_warning "relinking \`$file'"
+	  func_warning "relinking '$file'"
 	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
 	fi
 
 	# See the names of the shared library.
 	set dummy $library_names; shift
 	if test -n "$1"; then
-	  realname="$1"
+	  realname=$1
 	  shift
 
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
 
 	  # Install the shared library and build the symlinks.
 	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
-	  tstripme="$stripme"
+	  tstripme=$stripme
 	  case $host_os in
 	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
-	      tstripme=""
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
 	      ;;
 	    esac
 	    ;;
@@ -3006,7 +4334,7 @@
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
 	    # so we also need to try rm && ln -s.
 	    for linkname
@@ -3017,14 +4345,14 @@
 	  fi
 
 	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
+	  lib=$destdir/$realname
 	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
 	# Install the pseudo-library for information purposes.
 	func_basename "$file"
-	name="$func_basename_result"
-	instname="$dir/$name"i
+	name=$func_basename_result
+	instname=$dir/${name}i
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
@@ -3036,11 +4364,11 @@
 
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+	  destfile=$destdir/$destname
 	else
 	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
 	fi
 
 	# Deduce the name of the destination old-style object file.
@@ -3050,11 +4378,11 @@
 	  staticdest=$func_lo2o_result
 	  ;;
 	*.$objext)
-	  staticdest="$destfile"
+	  staticdest=$destfile
 	  destfile=
 	  ;;
 	*)
-	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
 	  ;;
 	esac
 
@@ -3063,7 +4391,7 @@
 	  func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
+	if test yes = "$build_old_libs"; then
 	  # Deduce the name of the old-style object file.
 	  func_lo2o "$file"
 	  staticobj=$func_lo2o_result
@@ -3075,23 +4403,23 @@
       *)
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+	  destfile=$destdir/$destname
 	else
 	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
 	fi
 
 	# If the file is missing, and there is a .exe on the end, strip it
 	# because it is most likely a libtool script we actually want to
 	# install
-	stripped_ext=""
+	stripped_ext=
 	case $file in
 	  *.exe)
 	    if test ! -f "$file"; then
 	      func_stripname '' '.exe' "$file"
 	      file=$func_stripname_result
-	      stripped_ext=".exe"
+	      stripped_ext=.exe
 	    fi
 	    ;;
 	esac
@@ -3119,19 +4447,19 @@
 
 	  # Check the variables that should have been set.
 	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
 
-	  finalize=yes
+	  finalize=:
 	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
 	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "\`$lib' has not been installed in \`$libdir'"
-	      finalize=no
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
 	    fi
 	  done
 
@@ -3139,29 +4467,29 @@
 	  func_source "$wrapper"
 
 	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
+	  if test no = "$fast_install" && test -n "$relink_command"; then
 	    $opt_dry_run || {
-	      if test "$finalize" = yes; then
+	      if $finalize; then
 	        tmpdir=`func_mktempdir`
 		func_basename "$file$stripped_ext"
-		file="$func_basename_result"
-	        outputname="$tmpdir/$file"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
 	        # Replace the output file specification.
 	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
-	        $opt_silent || {
+	        $opt_quiet || {
 	          func_quote_for_expand "$relink_command"
 		  eval "func_echo $func_quote_for_expand_result"
 	        }
 	        if eval "$relink_command"; then :
 	          else
-		  func_error "error: relink \`$file' with the above command before installing it"
+		  func_error "error: relink '$file' with the above command before installing it"
 		  $opt_dry_run || ${RM}r "$tmpdir"
 		  continue
 	        fi
-	        file="$outputname"
+	        file=$outputname
 	      else
-	        func_warning "cannot relink \`$file'"
+	        func_warning "cannot relink '$file'"
 	      fi
 	    }
 	  else
@@ -3198,10 +4526,10 @@
 
     for file in $staticlibs; do
       func_basename "$file"
-      name="$func_basename_result"
+      name=$func_basename_result
 
       # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
+      oldlib=$destdir/$name
       func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
       tool_oldlib=$func_to_tool_file_result
 
@@ -3216,18 +4544,18 @@
     done
 
     test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
+      func_warning "remember to run '$progname --finish$future_libdirs'"
 
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
     else
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -3235,16 +4563,17 @@
 # a dlpreopen symbol table.
 func_generate_dlsyms ()
 {
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%^a-zA-Z0-9%_%g'`
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%^a-zA-Z0-9%_%g'`
     my_dlsyms=
 
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
       if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
+	my_dlsyms=${my_outputname}S.c
       else
 	func_error "not configured to extract global symbols from dlpreopened files"
       fi
@@ -3255,7 +4584,7 @@
       "") ;;
       *.c)
 	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
+	nlist=$output_objdir/$my_outputname.nm
 
 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
@@ -3263,34 +4592,36 @@
 	func_verbose "creating $output_objdir/$my_dlsyms"
 
 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
 
 #ifdef __cplusplus
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
 #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
 #endif
 
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
 # define LT_DLSYM_CONST const
 #endif
 
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
 /* External symbol declarations for the compiler. */\
 "
 
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
 
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
@@ -3298,7 +4629,7 @@
 	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
 	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
 	  done
 
@@ -3318,10 +4649,10 @@
 
 	  # Prepare the list of exported symbols
 	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
+	    export_symbols=$output_objdir/$outputname.exp
 	    $opt_dry_run || {
 	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
 	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -3331,7 +4662,7 @@
 	    }
 	  else
 	    $opt_dry_run || {
-	      eval "${SED} -e 's/$.*^$$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval "$SED -e 's/$.*^$$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
@@ -3345,22 +4676,22 @@
 	fi
 
 	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_verbose "extracting global C symbols from '$dlprefile'"
 	  func_basename "$dlprefile"
-	  name="$func_basename_result"
+	  name=$func_basename_result
           case $host in
 	    *cygwin* | *mingw* | *cegcc* )
 	      # if an import library, we need to obtain dlname
 	      if func_win32_import_lib_p "$dlprefile"; then
 	        func_tr_sh "$dlprefile"
 	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
-	        dlprefile_dlbasename=""
+	        dlprefile_dlbasename=
 	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
 	          # Use subshell, to avoid clobbering current variable values
 	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-	          if test -n "$dlprefile_dlname" ; then
+	          if test -n "$dlprefile_dlname"; then
 	            func_basename "$dlprefile_dlname"
-	            dlprefile_dlbasename="$func_basename_result"
+	            dlprefile_dlbasename=$func_basename_result
 	          else
 	            # no lafile. user explicitly requested -dlpreopen <import library>.
 	            $sharedlib_from_linklib_cmd "$dlprefile"
@@ -3368,7 +4699,7 @@
 	          fi
 	        fi
 	        $opt_dry_run || {
-	          if test -n "$dlprefile_dlbasename" ; then
+	          if test -n "$dlprefile_dlbasename"; then
 	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
 	          else
 	            func_warning "Could not compute DLL name from $name"
@@ -3424,6 +4755,11 @@
 	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
 	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
@@ -3432,11 +4768,30 @@
   void *address;
 } lt_dlsymlist;
 extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols;
+lt_${my_prefix}_LTX_preloaded_symbols;\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
 LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols =
-{\
-  { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
 
 	  case $need_lib_prefix in
 	  no)
@@ -3478,9 +4833,7 @@
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
 	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
 	    ;;
 	  esac
 	  ;;
@@ -3497,10 +4850,10 @@
 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
 
 	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	symfileobj=$output_objdir/${my_outputname}S.$objext
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
@@ -3518,7 +4871,7 @@
 	esac
 	;;
       *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
 	;;
       esac
     else
@@ -3532,6 +4885,32 @@
     fi
 }
 
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_A-Za-z0-9_+_adl*|A-Za-z0-9_+_adl*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
@@ -3541,8 +4920,9 @@
 # Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
-  $opt_debug
-  win32_libid_type="unknown"
+  $debug_cmd
+
+  win32_libid_type=unknown
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
   *ar\ archive\ import\ library*) # definitely import
@@ -3552,16 +4932,29 @@
     # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
-	$SED -n -e '
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
 	    1,100{
 		/ I /{
-		    s,.*,import,
+		    s|.*|import|
 		    p
 		    q
 		}
 	    }'`
+	;;
+      esac
       case $win32_nmres in
       import*)  win32_libid_type="x86 archive import";;
       *)        win32_libid_type="x86 archive static";;
@@ -3593,7 +4986,8 @@
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib ()
 {
-  $opt_debug
+  $debug_cmd
+
   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
 }
 
@@ -3610,7 +5004,8 @@
 # specified import library.
 func_cygming_dll_for_implib_fallback_core ()
 {
-  $opt_debug
+  $debug_cmd
+
   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
     $SED '/^Contents of section '"$match_literal"':/{
@@ -3646,8 +5041,8 @@
       /./p' |
     # we now have a list, one entry per line, of the stringified
     # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
     # a '.' (that is, objdump's representation of an unprintable
     # character.) This should work for all archives with less than
     # 0x302f exports -- but will fail for DLLs whose name actually
@@ -3658,30 +5053,6 @@
     $SED -e '/^\./d;/^.\./d;q'
 }
 
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_A-Za-z0-9_+_adl*|A-Za-z0-9_+_adl*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
 # func_cygming_dll_for_implib_fallback ARG
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
@@ -3695,16 +5066,17 @@
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib_fallback ()
 {
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
     # binutils import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
+  elif func_cygming_ms_implib_p "$1"; then
     # ms-generated import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
   else
     # unknown
-    sharedlib_from_linklib_result=""
+    sharedlib_from_linklib_result=
   fi
 }
 
@@ -3712,10 +5084,11 @@
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
       lockfile=$f_ex_an_ar_oldlib.lock
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
@@ -3724,7 +5097,7 @@
     fi
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
 		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
+    if test yes = "$lock_old_archive_extraction"; then
       $opt_dry_run || rm -f "$lockfile"
     fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -3738,22 +5111,23 @@
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
-    $opt_debug
-    my_gentop="$1"; shift
+    $debug_cmd
+
+    my_gentop=$1; shift
     my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
-	\\/* | A-Za-z:\\/*) my_xabs="$my_xlib" ;;
+	\\/* | A-Za-z:\\/*) my_xabs=$my_xlib ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
+      my_xlib=$func_basename_result
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
@@ -3765,7 +5139,7 @@
 	esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
 
       func_mkdir_p "$my_xdir"
 
@@ -3778,22 +5152,23 @@
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
 	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
 	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
 	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
 	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
 	    done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
@@ -3815,7 +5190,7 @@
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
-    func_extract_archives_result="$my_oldobjs"
+    func_extract_archives_result=$my_oldobjs
 }
 
 
@@ -3830,7 +5205,7 @@
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()
@@ -3841,7 +5216,7 @@
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
@@ -3898,9 +5273,9 @@
 
 # Very basic option parsing. These options are (a) specific to
 # the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
 # windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
 # this pattern).
 #
 # There are only two supported options: --lt-debug and
@@ -3933,7 +5308,7 @@
 
   # Print the debug banner immediately:
   if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
   fi
 }
 
@@ -3944,7 +5319,7 @@
   lt_dump_args_N=1;
   for lt_arg
   do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv\$lt_dump_args_N: \$lt_arg\"
+    \$ECHO \"$outputname:$output:\$LINENO: newargv\$lt_dump_args_N: \$lt_arg\"
     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
   done
 }
@@ -3958,7 +5333,7 @@
   *-*-mingw | *-*-os2* | *-cegcc*)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv0: \$progdir\\\\\$program\" 1>&2
+        \$ECHO \"$outputname:$output:\$LINENO: newargv0: \$progdir\\\\\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -3968,7 +5343,7 @@
   *)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv0: \$progdir/\$program\" 1>&2
+        \$ECHO \"$outputname:$output:\$LINENO: newargv0: \$progdir/\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -4043,13 +5418,13 @@
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
-	if test "$fast_install" = yes; then
+	if test yes = "$fast_install"; then
 	  $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
@@ -4066,7 +5441,7 @@
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
-	$ECHO \"\$relink_command_output\" >&2
+	\$ECHO \"\$relink_command_output\" >&2
 	$RM \"\$progdir/\$file\"
 	exit 1
       fi
@@ -4101,7 +5476,7 @@
 	fi
 
 	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -4121,7 +5496,7 @@
     fi
   else
     # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
@@ -4140,7 +5515,7 @@
 	cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
@@ -4175,47 +5550,45 @@
 #include <fcntl.h>
 #include <sys/stat.h>
 
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
 /* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
 # ifdef __STRICT_ANSI__
 int _putenv (const char *);
 # endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
 # ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 # endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
 #endif
 
 /* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 # define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
 # define HAVE_SETENV
 # define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
 #endif
 
-#if defined(PATH_MAX)
+#if defined PATH_MAX
 # define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
@@ -4234,8 +5607,8 @@
 # define PATH_SEPARATOR ':'
 #endif
 
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
@@ -4268,10 +5641,10 @@
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
+  if (stale) { free (stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
 static int lt_debug = 1;
 #else
 static int lt_debug = 0;
@@ -4300,11 +5673,16 @@
 EOF
 
 	    cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
-	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
               func_to_host_path "$temp_rpath"
 	      cat <<EOF
 const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
@@ -4328,7 +5706,7 @@
 EOF
 	    fi
 
-	    if test "$fast_install" = yes; then
+	    if test yes = "$fast_install"; then
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
@@ -4357,12 +5735,12 @@
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
-  intptr_t rval = 127;
+  int rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv0));
-  newargz = XMALLOC (char *, argc + 1);
+  newargz = XMALLOC (char *, (size_t) argc + 1);
 
   /* very simple arg parsing; don't want to rely on getopt
    * also, copy all non cwrapper options to newargz, except
@@ -4371,10 +5749,10 @@
   newargc=0;
   for (i = 1; i < argc; i++)
     {
-      if (strcmp (argvi, dumpscript_opt) == 0)
+      if (STREQ (argvi, dumpscript_opt))
 	{
 EOF
-	    case "$host" in
+	    case $host in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
 		echo "          setmode(1,_O_BINARY);"
@@ -4385,12 +5763,12 @@
 	  lt_dump_script (stdout);
 	  return 0;
 	}
-      if (strcmp (argvi, debug_opt) == 0)
+      if (STREQ (argvi, debug_opt))
 	{
           lt_debug = 1;
           continue;
 	}
-      if (strcmp (argvi, ltwrapper_option_prefix) == 0)
+      if (STREQ (argvi, ltwrapper_option_prefix))
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
@@ -4413,7 +5791,7 @@
 EOF
 	    cat <<EOF
   /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
 EOF
 	    cat <<"EOF"
   lt_debugprintf (__FILE__, __LINE__, "(main) argv0: %s\n", argv0);
@@ -4524,7 +5902,7 @@
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
   newargz = prepare_spawn (newargz);
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
@@ -4569,7 +5947,7 @@
 {
   const char *base;
 
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name0) && name1 == ':')
     name += 2;
@@ -4628,7 +6006,7 @@
   const char *p_next;
   /* static buffer for getcwd */
   char tmpLT_PATHMAX + 1;
-  int tmp_len;
+  size_t tmp_len;
   char *concat_name;
 
   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -4638,7 +6016,7 @@
     return NULL;
 
   /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
   if (isalpha ((unsigned char) wrapper0) && wrapper1 == ':')
     {
       concat_name = xstrdup (wrapper);
@@ -4656,7 +6034,7 @@
 	    return concat_name;
 	  XFREE (concat_name);
 	}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
     }
 #endif
 
@@ -4679,7 +6057,7 @@
 	      for (q = p; *q; q++)
 		if (IS_PATH_SEPARATOR (*q))
 		  break;
-	      p_len = q - p;
+	      p_len = (size_t) (q - p);
 	      p_next = (*q == '\0' ? q : q + 1);
 	      if (p_len == 0)
 		{
@@ -4798,7 +6176,7 @@
   if (patlen <= len)
     {
       str += len - patlen;
-      if (strcmp (str, pat) == 0)
+      if (STREQ (str, pat))
 	*str = '\0';
     }
   return str;
@@ -4863,7 +6241,7 @@
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
-    int len = strlen (name) + 1 + strlen (value) + 1;
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
@@ -4880,8 +6258,8 @@
   char *new_value;
   if (orig_value && *orig_value)
     {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
@@ -4912,10 +6290,10 @@
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_valuelen-1))
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_valuelen-1))
         {
-          new_valuelen-1 = '\0';
+          new_value--len = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
@@ -5082,27 +6460,47 @@
 # True if ARG is an import lib, as indicated by $file_magic_cmd
 func_win32_import_lib_p ()
 {
-    $opt_debug
+    $debug_cmd
+
     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
     *import*) : ;;
     *) false ;;
     esac
 }
 
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++0-90-9\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
 # func_mode_link arg...
 func_mode_link ()
 {
-    $opt_debug
+    $debug_cmd
+
     case $host in
     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
+      # what system we are compiling for in order to pass an extra
       # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
+      # to make a dll that has undefined symbols, in which case not
       # even a static library is built.  For now, we need to specify
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
@@ -5146,10 +6544,11 @@
     module=no
     no_install=no
     objs=
+    os2dllname=
     non_pic_objects=
     precious_files_regex=
     prefer_static_libs=no
-    preload=no
+    preload=false
     prev=
     prevarg=
     release=
@@ -5161,7 +6560,7 @@
     vinfo=
     vinfo_number=no
     weak_libs=
-    single_module="${wl}-single_module"
+    single_module=$wl-single_module
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
@@ -5169,15 +6568,15 @@
     do
       case $arg in
       -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
 	build_old_libs=no
 	break
 	;;
       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
 	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
@@ -5210,7 +6609,7 @@
 
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
-      arg="$1"
+      arg=$1
       shift
       func_quote_for_eval "$arg"
       qarg=$func_quote_for_eval_unquoted_result
@@ -5227,21 +6626,21 @@
 
 	case $prev in
 	bindir)
-	  bindir="$arg"
+	  bindir=$arg
 	  prev=
 	  continue
 	  ;;
 	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
+	  $preload || {
 	    # Add the symbol object into the linking commands.
 	    func_append compile_command " @SYMFILE@"
 	    func_append finalize_command " @SYMFILE@"
-	    preload=yes
-	  fi
+	    preload=:
+	  }
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
-	    if test "$dlself" = no; then
+	    if test no = "$dlself"; then
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
@@ -5249,9 +6648,9 @@
 	    continue
 	    ;;
 	  self)
-	    if test "$prev" = dlprefiles; then
+	    if test dlprefiles = "$prev"; then
 	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
 	      dlself=yes
 	    else
 	      dlself=needless
@@ -5261,7 +6660,7 @@
 	    continue
 	    ;;
 	  *)
-	    if test "$prev" = dlfiles; then
+	    if test dlfiles = "$prev"; then
 	      func_append dlfiles " $arg"
 	    else
 	      func_append dlprefiles " $arg"
@@ -5272,14 +6671,14 @@
 	  esac
 	  ;;
 	expsyms)
-	  export_symbols="$arg"
+	  export_symbols=$arg
 	  test -f "$arg" \
-	    || func_fatal_error "symbol file \`$arg' does not exist"
+	    || func_fatal_error "symbol file '$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
-	  export_symbols_regex="$arg"
+	  export_symbols_regex=$arg
 	  prev=
 	  continue
 	  ;;
@@ -5297,7 +6696,13 @@
 	  continue
 	  ;;
 	inst_prefix)
-	  inst_prefix_dir="$arg"
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
 	  prev=
 	  continue
 	  ;;
@@ -5321,21 +6726,21 @@
 
 		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none &&
-		   test "$non_pic_object" = none; then
-		  func_fatal_error "cannot find name of object for \`$arg'"
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
 		func_dirname "$arg" "/" ""
-		xdir="$func_dirname_result"
+		xdir=$func_dirname_result
 
-		if test "$pic_object" != none; then
+		if test none != "$pic_object"; then
 		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
+		  pic_object=$xdir$pic_object
 
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
 		      func_append dlfiles " $pic_object"
 		      prev=
 		      continue
@@ -5346,7 +6751,7 @@
 		  fi
 
 		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
+		  if test dlprefiles = "$prev"; then
 		    # Preload the old-style object.
 		    func_append dlprefiles " $pic_object"
 		    prev=
@@ -5354,23 +6759,23 @@
 
 		  # A PIC object.
 		  func_append libobjs " $pic_object"
-		  arg="$pic_object"
+		  arg=$pic_object
 		fi
 
 		# Non-PIC object.
-		if test "$non_pic_object" != none; then
+		if test none != "$non_pic_object"; then
 		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
+		  non_pic_object=$xdir$non_pic_object
 
 		  # A standard non-PIC object
 		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
 		  fi
 		else
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
+		  non_pic_object=$pic_object
 		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
@@ -5378,7 +6783,7 @@
 		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
 		  func_dirname "$arg" "/" ""
-		  xdir="$func_dirname_result"
+		  xdir=$func_dirname_result
 
 		  func_lo2o "$arg"
 		  pic_object=$xdir$objdir/$func_lo2o_result
@@ -5386,24 +6791,29 @@
 		  func_append libobjs " $pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 	        else
-		  func_fatal_error "\`$arg' is not a valid libtool object"
+		  func_fatal_error "'$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    func_fatal_error "link input file \`$arg' does not exist"
+	    func_fatal_error "link input file '$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
 	precious_regex)
-	  precious_files_regex="$arg"
+	  precious_files_regex=$arg
 	  prev=
 	  continue
 	  ;;
 	release)
-	  release="-$arg"
+	  release=-$arg
 	  prev=
 	  continue
 	  ;;
@@ -5415,7 +6825,7 @@
 	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
-	  if test "$prev" = rpath; then
+	  if test rpath = "$prev"; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
 	    *) func_append rpath " $arg" ;;
@@ -5430,7 +6840,7 @@
 	  continue
 	  ;;
 	shrext)
-	  shrext_cmds="$arg"
+	  shrext_cmds=$arg
 	  prev=
 	  continue
 	  ;;
@@ -5470,7 +6880,7 @@
 	esac
       fi # test -n "$prev"
 
-      prevarg="$arg"
+      prevarg=$arg
 
       case $arg in
       -all-static)
@@ -5484,7 +6894,7 @@
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -5516,7 +6926,7 @@
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
-	if test "X$arg" = "X-export-symbols"; then
+	if test X-export-symbols = "X$arg"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
@@ -5550,9 +6960,9 @@
 	func_stripname "-L" '' "$arg"
 	if test -z "$func_stripname_result"; then
 	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between \`-L' and \`$1'"
+	    func_fatal_error "require no space between '-L' and '$1'"
 	  else
-	    func_fatal_error "need path for \`-L' option"
+	    func_fatal_error "need path for '-L' option"
 	  fi
 	fi
 	func_resolve_sysroot "$func_stripname_result"
@@ -5563,8 +6973,8 @@
 	*)
 	  absdir=`cd "$dir" && pwd`
 	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	  dir="$absdir"
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
 	  ;;
 	esac
 	case "$deplibs " in
@@ -5599,7 +7009,7 @@
 	;;
 
       -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
@@ -5607,11 +7017,11 @@
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.012)
 	    # Rhapsody C and math libraries are in the System framework
@@ -5620,16 +7030,16 @@
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  esac
-	elif test "X$arg" = "X-lc_r"; then
+	elif test X-lc_r = "X$arg"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -5639,6 +7049,11 @@
 	continue
 	;;
 
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
       -module)
 	module=yes
 	continue
@@ -5668,7 +7083,7 @@
 	;;
 
       -multi_module)
-	single_module="${wl}-multi_module"
+	single_module=$wl-multi_module
 	continue
 	;;
 
@@ -5682,8 +7097,8 @@
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "\`-no-install' is ignored for $host"
-	  func_warning "assuming \`-no-fast-install' instead"
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -5701,6 +7116,11 @@
 	continue
 	;;
 
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
       -o) prev=output ;;
 
       -precious-files-regex)
@@ -5788,14 +7208,14 @@
 	func_stripname '-Wc,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs="$IFS"; IFS=','
+	save_ifs=$IFS; IFS=,
 	for flag in $args; do
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
           func_quote_for_eval "$flag"
 	  func_append arg " $func_quote_for_eval_result"
 	  func_append compiler_flags " $func_quote_for_eval_result"
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -5804,15 +7224,15 @@
 	func_stripname '-Wl,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs="$IFS"; IFS=','
+	save_ifs=$IFS; IFS=,
 	for flag in $args; do
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
           func_quote_for_eval "$flag"
 	  func_append arg " $wl$func_quote_for_eval_result"
 	  func_append compiler_flags " $wl$func_quote_for_eval_result"
 	  func_append linker_flags " $func_quote_for_eval_result"
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -5835,7 +7255,7 @@
       # -msg_* for osf cc
       -msg_*)
 	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
 
       # Flags to be passed through unchanged, with rationale:
@@ -5847,25 +7267,46 @@
       # -m*, -t45*, -txscale* architecture-specific flags for GCC
       # -F/path              path to uninstalled frameworks, gcc on darwin
       # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
       # @file                GCC response files
       # -tp=*                Portland pgcc target processor selection
       # --sysroot=*          for sysroot support
-      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -stdlib=*            select c++ std lib with clang
       -64|-mips0-9|-r0-90-9*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
       -t45*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
         func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         func_append compiler_flags " $arg"
         continue
         ;;
 
+      -Z*)
+        if test os2 = "`expr $host : '.*$os2$'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
       # Some other compiler flag.
       -* | +*)
         func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
 
       *.$objext)
@@ -5886,21 +7327,21 @@
 
 	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none &&
-	     test "$non_pic_object" = none; then
-	    func_fatal_error "cannot find name of object for \`$arg'"
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
 	  func_dirname "$arg" "/" ""
-	  xdir="$func_dirname_result"
+	  xdir=$func_dirname_result
 
-	  if test "$pic_object" != none; then
+	  test none = "$pic_object" || {
 	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
+	    pic_object=$xdir$pic_object
 
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
 		func_append dlfiles " $pic_object"
 		prev=
 		continue
@@ -5911,7 +7352,7 @@
 	    fi
 
 	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
+	    if test dlprefiles = "$prev"; then
 	      # Preload the old-style object.
 	      func_append dlprefiles " $pic_object"
 	      prev=
@@ -5919,23 +7360,23 @@
 
 	    # A PIC object.
 	    func_append libobjs " $pic_object"
-	    arg="$pic_object"
-	  fi
+	    arg=$pic_object
+	  }
 
 	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
+	  if test none != "$non_pic_object"; then
 	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
+	    non_pic_object=$xdir$non_pic_object
 
 	    # A standard non-PIC object
 	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
+	    non_pic_object=$pic_object
 	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
@@ -5943,7 +7384,7 @@
 	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
 	    func_dirname "$arg" "/" ""
-	    xdir="$func_dirname_result"
+	    xdir=$func_dirname_result
 
 	    func_lo2o "$arg"
 	    pic_object=$xdir$objdir/$func_lo2o_result
@@ -5951,7 +7392,7 @@
 	    func_append libobjs " $pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  else
-	    func_fatal_error "\`$arg' is not a valid libtool object"
+	    func_fatal_error "'$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -5967,11 +7408,11 @@
 	# A libtool-controlled library.
 
 	func_resolve_sysroot "$arg"
-	if test "$prev" = dlfiles; then
+	if test dlfiles = "$prev"; then
 	  # This library was specified with -dlopen.
 	  func_append dlfiles " $func_resolve_sysroot_result"
 	  prev=
-	elif test "$prev" = dlprefiles; then
+	elif test dlprefiles = "$prev"; then
 	  # The library was specified with -dlpreopen.
 	  func_append dlprefiles " $func_resolve_sysroot_result"
 	  prev=
@@ -5986,7 +7427,7 @@
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
       esac # arg
 
@@ -5998,9 +7439,9 @@
     done # argument parsing loop
 
     test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
+      func_fatal_help "the '$prevarg' option requires an argument"
 
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
       func_append compile_command " $arg"
       func_append finalize_command " $arg"
@@ -6009,20 +7450,23 @@
     oldlibs=
     # calculate the name of the file, without its directory
     func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
     func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
+    output_objdir=$func_dirname_result$objdir
     func_to_tool_file "$output_objdir/"
     tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
@@ -6045,7 +7489,7 @@
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_preserve_dup_deps ; then
+      if $opt_preserve_dup_deps; then
 	case "$libs " in
 	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	esac
@@ -6053,7 +7497,7 @@
       func_append libs " $deplib"
     done
 
-    if test "$linkmode" = lib; then
+    if test lib = "$linkmode"; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
       # Compute libraries that are listed more than once in $predeps
@@ -6085,7 +7529,7 @@
 	  case $file in
 	  *.la) ;;
 	  *)
-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -6093,7 +7537,7 @@
     prog)
 	compile_deplibs=
 	finalize_deplibs=
-	alldeplibs=no
+	alldeplibs=false
 	newdlfiles=
 	newdlprefiles=
 	passes="conv scan dlopen dlpreopen link"
@@ -6105,29 +7549,29 @@
     for pass in $passes; do
       # The preopen pass in lib mode reverses $deplibs; put it back here
       # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
+      if test lib,link = "$linkmode,$pass"; then
 	## FIXME: Find the place where the list is rebuilt in the wrong
 	##        order, and fix it there properly
         tmp_deplibs=
 	for deplib in $deplibs; do
 	  tmp_deplibs="$deplib $tmp_deplibs"
 	done
-	deplibs="$tmp_deplibs"
+	deplibs=$tmp_deplibs
       fi
 
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
 	deplibs=
       fi
-      if test "$linkmode" = prog; then
+      if test prog = "$linkmode"; then
 	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+      if test lib,dlpreopen = "$linkmode,$pass"; then
 	# Collect and forward deplibs of preopened libtool libs
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
@@ -6148,26 +7592,26 @@
 	    esac
 	  done
 	done
-	libs="$dlprefiles"
+	libs=$dlprefiles
       fi
-      if test "$pass" = dlopen; then
+      if test dlopen = "$pass"; then
 	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
+	save_deplibs=$deplibs
 	deplibs=
       fi
 
       for deplib in $libs; do
 	lib=
-	found=no
+	found=false
 	case $deplib in
 	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
         |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	  if test "$linkmode,$pass" = "prog,link"; then
+	  if test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    func_append compiler_flags " $deplib"
-	    if test "$linkmode" = lib ; then
+	    if test lib = "$linkmode"; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6177,13 +7621,13 @@
 	  continue
 	  ;;
 	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    func_warning "\`-l' is ignored for archives/objects"
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
 	    continue
 	  fi
 	  func_stripname '-l' '' "$deplib"
 	  name=$func_stripname_result
-	  if test "$linkmode" = lib; then
+	  if test lib = "$linkmode"; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -6191,31 +7635,22 @@
 	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
+	      lib=$searchdir/lib$name$search_ext
 	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
+		if test .la = "$search_ext"; then
+		  found=:
 		else
-		  found=no
+		  found=false
 		fi
 		break 2
 	      fi
 	    done
 	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
+	  if $found; then
+	    # deplib is a libtool library
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
 		if func_lalib_p "$lib"; then
@@ -6223,19 +7658,19 @@
 		  old_library=
 		  func_source "$lib"
 		  for l in $old_library $library_names; do
-		    ll="$l"
+		    ll=$l
 		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
 		    func_dirname "$lib" "" "."
-		    ladir="$func_dirname_result"
+		    ladir=$func_dirname_result
 		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
+		    if test prog,link = "$linkmode,$pass"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
@@ -6244,15 +7679,25 @@
 	      *) ;;
 	      esac
 	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
 	  fi
 	  ;; # -l
 	*.ltframework)
-	  if test "$linkmode,$pass" = "prog,link"; then
+	  if test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    deplibs="$deplib $deplibs"
-	    if test "$linkmode" = lib ; then
+	    if test lib = "$linkmode"; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6265,18 +7710,18 @@
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
+	    test conv = "$pass" && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    func_stripname '-L' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  prog)
-	    if test "$pass" = conv; then
+	    if test conv = "$pass"; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
-	    if test "$pass" = scan; then
+	    if test scan = "$pass"; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -6287,13 +7732,13 @@
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  *)
-	    func_warning "\`-L' is ignored for archives/objects"
+	    func_warning "'-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
-	  if test "$pass" = link; then
+	  if test link = "$pass"; then
 	    func_stripname '-R' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    dir=$func_resolve_sysroot_result
@@ -6311,7 +7756,7 @@
 	  lib=$func_resolve_sysroot_result
 	  ;;
 	*.$libext)
-	  if test "$pass" = conv; then
+	  if test conv = "$pass"; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
@@ -6322,21 +7767,26 @@
 	    case " $dlpreconveniencelibs " in
 	    *" $deplib "*) ;;
 	    *)
-	      valid_a_lib=no
+	      valid_a_lib=false
 	      case $deplibs_check_method in
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 $.*$"`
 		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=yes
+		    valid_a_lib=:
 		  fi
 		;;
 		pass_all)
-		  valid_a_lib=yes
+		  valid_a_lib=:
 		;;
 	      esac
-	      if test "$valid_a_lib" != yes; then
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
 		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
 		echo "*** I have the capability to make that library automatically link in when"
@@ -6344,18 +7794,13 @@
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because the file extensions .$libext of this argument makes me believe"
 		echo "*** that it is just a static archive that I should not use here."
-	      else
-		echo
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
 	      fi
 	      ;;
 	    esac
 	    continue
 	    ;;
 	  prog)
-	    if test "$pass" != link; then
+	    if test link != "$pass"; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -6366,10 +7811,10 @@
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
-	  if test "$pass" = conv; then
+	  if test conv = "$pass"; then
 	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
 	      func_append newdlprefiles " $deplib"
@@ -6382,22 +7827,20 @@
 	  continue
 	  ;;
 	%DEPLIBS%)
-	  alldeplibs=yes
+	  alldeplibs=:
 	  continue
 	  ;;
 	esac # case $deplib
 
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	fi
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
 
 	func_dirname "$lib" "" "."
-	ladir="$func_dirname_result"
+	ladir=$func_dirname_result
 
 	dlname=
 	dlopen=
@@ -6427,30 +7870,30 @@
 	  done
 	fi
 	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% $^ $*$.ltframework% -framework \1%g'`
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
 	  test -n "$dlopen" && func_append dlfiles " $dlopen"
 	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
 	fi
 
-	if test "$pass" = conv; then
+	if test conv = "$pass"; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for \`$lib'"
+	      func_fatal_error "cannot find name of link library for '$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    func_fatal_error "\`$lib' is not a convenience library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
 	  fi
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    deplibs="$deplib $deplibs"
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -6464,26 +7907,26 @@
 	# Get the name of the library we link against.
 	linklib=
 	if test -n "$old_library" &&
-	   { test "$prefer_static_libs" = yes ||
-	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
 	  linklib=$old_library
 	else
 	  for l in $old_library $library_names; do
-	    linklib="$l"
+	    linklib=$l
 	  done
 	fi
 	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for \`$lib'"
+	  func_fatal_error "cannot find name of link library for '$lib'"
 	fi
 
 	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	  fi
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
 	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
@@ -6497,40 +7940,40 @@
 
 	# We need an absolute path.
 	case $ladir in
-	\\/* | A-Za-z:\\/*) abs_ladir="$ladir" ;;
+	\\/* | A-Za-z:\\/*) abs_ladir=$ladir ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "cannot determine absolute directory name of '$ladir'"
 	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir="$ladir"
+	    abs_ladir=$ladir
 	  fi
 	  ;;
 	esac
 	func_basename "$lib"
-	laname="$func_basename_result"
+	laname=$func_basename_result
 
 	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
+	if test yes = "$installed"; then
 	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    func_warning "library \`$lib' was moved."
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
 	  else
-	    dir="$lt_sysroot$libdir"
-	    absdir="$lt_sysroot$libdir"
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
 	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
+	    dir=$ladir
+	    absdir=$abs_ladir
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  fi
@@ -6539,11 +7982,11 @@
 	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
 	  fi
-	  case "$host" in
+	  case $host in
 	    # special handling for platforms with PE-DLLs.
 	    *cygwin* | *mingw* | *cegcc* )
 	      # Linker will automatically link against shared library if both
@@ -6587,9 +8030,9 @@
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
-	  if test "$linkmode" = lib; then
+	  if test lib = "$linkmode"; then
 	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
+	  elif test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
@@ -6599,14 +8042,14 @@
 	fi
 
 
-	if test "$linkmode" = prog && test "$pass" != link; then
+	if test prog = "$linkmode" && test link != "$pass"; then
 	  func_append newlib_search_path " $ladir"
 	  deplibs="$lib $deplibs"
 
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
 	  fi
 
 	  tmp_libs=
@@ -6618,14 +8061,14 @@
 		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
+	    if $linkalldeplibs; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -6635,15 +8078,15 @@
 	  continue
 	fi # $linkmode = prog...
 
-	if test "$linkmode,$pass" = "prog,link"; then
+	if test prog,link = "$linkmode,$pass"; then
 	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
 	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath:" in
+	      case $temp_rpath: in
 	      *"$absdir:"*) ;;
 	      *) func_append temp_rpath "$absdir:" ;;
 	      esac
@@ -6672,9 +8115,9 @@
 	    esac
 	  fi # $linkmode,$pass = prog,link...
 
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
 		 test -n "$library_names"; }; }; then
 	    # We only need to search for static libraries
 	    continue
@@ -6683,19 +8126,19 @@
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes; then
+	if test built = "$use_static_libs" && test yes = "$installed"; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
 	  case $host in
-	  *cygwin* | *mingw* | *cegcc*)
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
 	      # No point in relinking DLLs because paths are not encoded
 	      func_append notinst_deplibs " $lib"
 	      need_relink=no
 	    ;;
 	  *)
-	    if test "$installed" = no; then
+	    if test no = "$installed"; then
 	      func_append notinst_deplibs " $lib"
 	      need_relink=yes
 	    fi
@@ -6705,24 +8148,24 @@
 
 	  # Warn about portability, can't link against -module's on some
 	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=""
+	  dlopenmodule=
 	  for dlpremoduletest in $dlprefiles; do
 	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule="$dlpremoduletest"
+	      dlopenmodule=$dlpremoduletest
 	      break
 	    fi
 	  done
-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
 	    echo
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
 	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
 	    $ECHO "*** $linklib is not portable!"
 	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
@@ -6750,43 +8193,43 @@
 	    # figure out the soname
 	    set dummy $library_names
 	    shift
-	    realname="$1"
+	    realname=$1
 	    shift
 	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
-	      soname="$dlname"
+	      soname=$dlname
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw* | *cegcc*)
+	      *cygwin* | mingw* | *cegcc* | *os2*)
 	        func_arith $current - $age
 		major=$func_arith_result
-		versuffix="-$major"
+		versuffix=-$major
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
-	      soname="$realname"
+	      soname=$realname
 	    fi
 
 	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
+	    soroot=$soname
 	    func_basename "$soroot"
-	    soname="$func_basename_result"
+	    soname=$func_basename_result
 	    func_stripname 'lib' '.dll' "$soname"
 	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_verbose "extracting exported symbol list from '$soname'"
 	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for \`$soname'"
+	      func_verbose "generating import library for '$soname'"
 	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
@@ -6794,58 +8237,58 @@
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    lib_linked=yes
 	    case $hardcode_action in
 	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
 		case $host in
-		  *-*-sco3.2v5.0.024*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sco3.2v5.0.024*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.01.10* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
+		    *-*-unixware7*) add_dir=-L$dir ;;
 		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we can not
+		    # if the lib is a (non-dlopened) module then we cannot
 		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": ^:* bundle" >/dev/null ; then
+			 $GREP ": ^:* bundle" >/dev/null; then
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library" ; then
+			if test -z "$old_library"; then
 			  echo
 			  echo "*** And there doesn't seem to be a static archive available"
 			  echo "*** The link will probably fail, sorry"
 			else
-			  add="$dir/$old_library"
+			  add=$dir/$old_library
 			fi
 		      elif test -n "$old_library"; then
-			add="$dir/$old_library"
+			add=$dir/$old_library
 		      fi
 		    fi
 		esac
-	      elif test "$hardcode_minus_L" = no; then
+	      elif test no = "$hardcode_minus_L"; then
 		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
+		*-*-sunos*) add_shlibpath=$dir ;;
 		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes &&
-	         test "$hardcode_direct_absolute" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$absdir"
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
@@ -6854,10 +8297,10 @@
 		      ;;
 		  esac
 		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
 	      else
 		lib_linked=no
 	      fi
@@ -6865,7 +8308,7 @@
 	    *) lib_linked=no ;;
 	    esac
 
-	    if test "$lib_linked" != yes; then
+	    if test yes != "$lib_linked"; then
 	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
@@ -6875,15 +8318,15 @@
 	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
 	      esac
 	    fi
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes &&
-		 test "$hardcode_shlibpath_var" = yes; then
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) func_append finalize_shlibpath "$libdir:" ;;
@@ -6892,33 +8335,33 @@
 	    fi
 	  fi
 
-	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes &&
-	       test "$hardcode_direct_absolute" = no; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
 	      *) func_append finalize_shlibpath "$libdir:" ;;
 	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
 	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-		add="$inst_prefix_dir$libdir/$linklib"
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
 	      else
-		add="$libdir/$linklib"
+		add=$libdir/$linklib
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
+	      add_dir=-L$libdir
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
@@ -6927,10 +8370,10 @@
 		    ;;
 		esac
 	      fi
-	      add="-l$name"
+	      add=-l$name
 	    fi
 
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
@@ -6938,43 +8381,43 @@
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
-	elif test "$linkmode" = prog; then
+	elif test prog = "$linkmode"; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
 	    compile_deplibs="$dir/$linklib $compile_deplibs"
 	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
 	    compile_deplibs="-l$name -L$dir $compile_deplibs"
 	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
-	elif test "$build_libtool_libs" = yes; then
+	elif test yes = "$build_libtool_libs"; then
 	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
+	  if test pass_all != "$deplibs_check_method"; then
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
 	    echo
-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
 	    echo "*** I have the capability to make that library automatically link in when"
 	    echo "*** you link to this library.  But I can only do this if you have a"
 	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
+	    if test yes = "$module"; then
 	      echo "*** But as you try to build a module library, libtool will still create "
 	      echo "*** a static module, that should work as long as the dlopening application"
 	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
 		echo
 		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
 		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
 	      fi
-	      if test "$build_old_libs" = no; then
+	      if test no = "$build_old_libs"; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -6987,11 +8430,11 @@
 	  fi
 	fi # link shared/static library?
 
-	if test "$linkmode" = lib; then
+	if test lib = "$linkmode"; then
 	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
@@ -7005,12 +8448,12 @@
 	      *) func_append temp_deplibs " $libdir";;
 	      esac
 	    done
-	    dependency_libs="$temp_deplibs"
+	    dependency_libs=$temp_deplibs
 	  fi
 
 	  func_append newlib_search_path " $absdir"
 	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
@@ -7020,7 +8463,7 @@
                    func_resolve_sysroot "$func_stripname_result";;
               *) func_resolve_sysroot "$deplib" ;;
             esac
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $func_resolve_sysroot_result "*)
                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -7029,12 +8472,12 @@
 	    func_append tmp_libs " $func_resolve_sysroot_result"
 	  done
 
-	  if test "$link_all_deplibs" != no; then
+	  if test no != "$link_all_deplibs"; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
 	      path=
 	      case $deplib in
-	      -L*) path="$deplib" ;;
+	      -L*) path=$deplib ;;
 	      *.la)
 	        func_resolve_sysroot "$deplib"
 	        deplib=$func_resolve_sysroot_result
@@ -7042,12 +8485,12 @@
 		dir=$func_dirname_result
 		# We need an absolute path.
 		case $dir in
-		\\/* | A-Za-z:\\/*) absdir="$dir" ;;
+		\\/* | A-Za-z:\\/*) absdir=$dir ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of \`$dir'"
-		    absdir="$dir"
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
 		  fi
 		  ;;
 		esac
@@ -7055,35 +8498,35 @@
 		case $host in
 		*-*-darwin*)
 		  depdepl=
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=$.*$$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
 		      path=
 		    fi
 		  fi
 		  ;;
 		*)
-		  path="-L$absdir/$objdir"
+		  path=-L$absdir/$objdir
 		  ;;
 		esac
 		else
-		  eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib`
+		  eval libdir=`$SED -n -e 's/^libdir=$.*$$/\1/p' $deplib`
 		  test -z "$libdir" && \
-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
 		  test "$absdir" != "$libdir" && \
-		    func_warning "\`$deplib' seems to be moved"
+		    func_warning "'$deplib' seems to be moved"
 
-		  path="-L$absdir"
+		  path=-L$absdir
 		fi
 		;;
 	      esac
@@ -7095,23 +8538,23 @@
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
-      if test "$pass" = link; then
-	if test "$linkmode" = "prog"; then
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
 	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% $^ $*$.ltframework% -framework \1%g'`
 	fi
       fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
@@ -7121,12 +8564,12 @@
 	    esac
 	  done
 	  newlib_search_path=
-	fi
+	}
 
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
+	if test prog,link = "$linkmode,$pass"; then
 	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
 	fi
 	for var in $vars dependency_libs; do
 	  # Add libraries to $var in reverse order
@@ -7184,62 +8627,93 @@
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
       # Last step: remove runtime libs from dependency_libs
       # (they stay in deplibs)
       tmp_libs=
-      for i in $dependency_libs ; do
+      for i in $dependency_libs; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
 	*" $i "*)
-	  i=""
+	  i=
 	  ;;
 	esac
-	if test -n "$i" ; then
+	if test -n "$i"; then
 	  func_append tmp_libs " $i"
 	fi
       done
       dependency_libs=$tmp_libs
     done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
     fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
     fi
 
     case $linkmode in
     oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for archives"
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+	func_warning "'-l' and '-L' are ignored for archives" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for archives"
+	func_warning "'-rpath' is ignored for archives"
 
       test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for archives"
+	func_warning "'-R' is ignored for archives"
 
       test -n "$vinfo" && \
-	func_warning "\`-version-info/-version-number' is ignored for archives"
+	func_warning "'-version-info/-version-number' is ignored for archives"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for archives"
+	func_warning "'-release' is ignored for archives"
 
       test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "\`-export-symbols' is ignored for archives"
+	func_warning "'-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
-      oldlibs="$output"
+      oldlibs=$output
       func_append objs "$old_deplibs"
       ;;
 
     lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
+      # Make sure we only generate libraries of the form 'libNAME.la'.
       case $outputname in
       lib*)
 	func_stripname 'lib' '.la' "$outputname"
@@ -7248,10 +8722,10 @@
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	test "$module" = no && \
-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
 
-	if test "$need_lib_prefix" != no; then
+	if test no != "$need_lib_prefix"; then
 	  # Add the "lib" prefix for modules if required
 	  func_stripname '' '.la' "$outputname"
 	  name=$func_stripname_result
@@ -7265,8 +8739,8 @@
       esac
 
       if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
 	else
 	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -7275,21 +8749,21 @@
 	fi
       fi
 
-      test "$dlself" != no && \
-	func_warning "\`-dlopen self' is ignored for libtool libraries"
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
       shift
-      test "$#" -gt 1 && \
-	func_warning "ignoring multiple \`-rpath's for a libtool library"
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
 
-      install_libdir="$1"
+      install_libdir=$1
 
       oldlibs=
       if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
+	if test yes = "$build_libtool_libs"; then
 	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
+	  # Some compilers have problems with a '.al' extension so
 	  # convenience libraries should have the same extension an
 	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -7298,20 +8772,20 @@
 	fi
 
 	test -n "$vinfo" && \
-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
 
 	test -n "$release" && \
-	  func_warning "\`-release' is ignored for convenience libraries"
+	  func_warning "'-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
+	save_ifs=$IFS; IFS=:
 	set dummy $vinfo 0 0 0
 	shift
-	IFS="$save_ifs"
+	IFS=$save_ifs
 
 	test -n "$7" && \
-	  func_fatal_help "too many parameters to \`-version-info'"
+	  func_fatal_help "too many parameters to '-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -7319,42 +8793,42 @@
 
 	case $vinfo_number in
 	yes)
-	  number_major="$1"
-	  number_minor="$2"
-	  number_revision="$3"
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
+	  # that has an extra 1 added just for fun
 	  #
 	  case $version_type in
 	  # correct linux to gnu/linux during the next big refactor
-	  darwin|linux|osf|windows|none)
+	  darwin|freebsd-elf|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_revision"
+	    age=$number_minor
+	    revision=$number_revision
 	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
 	    ;;
 	  irix|nonstopux)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_minor"
+	    age=$number_minor
+	    revision=$number_minor
 	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
 	no)
-	  current="$1"
-	  revision="$2"
-	  age="$3"
+	  current=$1
+	  revision=$2
+	  age=$3
 	  ;;
 	esac
 
@@ -7362,30 +8836,30 @@
 	case $current in
 	0|1-9|1-90-9|1-90-90-9|1-90-90-90-9|1-90-90-90-90-9) ;;
 	*)
-	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|1-9|1-90-9|1-90-90-9|1-90-90-90-9|1-90-90-90-90-9) ;;
 	*)
-	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|1-9|1-90-9|1-90-90-9|1-90-90-90-9|1-90-90-90-90-9) ;;
 	*)
-	  func_error "AGE \`$age' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -7400,26 +8874,36 @@
 	  # verstring for coding it into the library header
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
+	  versuffix=$major.$age.$revision
 	  # Darwin ld doesn't like 0 for these options...
 	  func_arith $current + 1
 	  minor_current=$func_arith_result
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
 	  ;;
 
 	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
+	  major=.$current
+	  versuffix=.$current.$revision
 	  ;;
 
 	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current"
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
 	  ;;
 
 	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
+	  if test no = "$lt_irix_increment"; then
 	    func_arith $current - $age
 	  else
 	    func_arith $current - $age + 1
@@ -7430,69 +8914,74 @@
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
-	  verstring="$verstring_prefix$major.$revision"
+	  verstring=$verstring_prefix$major.$revision
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
-	  while test "$loop" -ne 0; do
+	  while test 0 -ne "$loop"; do
 	    func_arith $revision - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring="$verstring_prefix$major.$iface:$verstring"
+	    verstring=$verstring_prefix$major.$iface:$verstring
 	  done
 
-	  # Before this point, $major must not contain `.'.
+	  # Before this point, $major must not contain '.'.
 	  major=.$major
-	  versuffix="$major.$revision"
+	  versuffix=$major.$revision
 	  ;;
 
 	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
+	  versuffix=$major.$age.$revision
 	  ;;
 
 	osf)
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
-	  while test "$loop" -ne 0; do
+	  while test 0 -ne "$loop"; do
 	    func_arith $current - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring="$verstring:${iface}.0"
+	    verstring=$verstring:$iface.0
 	  done
 
 	  # Make executables depend on our current version.
-	  func_append verstring ":${current}.0"
+	  func_append verstring ":$current.0"
 	  ;;
 
 	qnx)
-	  major=".$current"
-	  versuffix=".$current"
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
 	  ;;
 
 	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
+	  major=.$current
+	  versuffix=.$current.$revision
 	  ;;
 
 	windows)
 	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
+	  # extension on DOS 8.3 file systems.
 	  func_arith $current - $age
 	  major=$func_arith_result
-	  versuffix="-$major"
+	  versuffix=-$major
 	  ;;
 
 	*)
-	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  func_fatal_configuration "unknown library version type '$version_type'"
 	  ;;
 	esac
 
@@ -7506,42 +8995,45 @@
 	    verstring=
 	    ;;
 	  *)
-	    verstring="0.0"
+	    verstring=0.0
 	    ;;
 	  esac
-	  if test "$need_version" = no; then
+	  if test no = "$need_version"; then
 	    versuffix=
 	  else
-	    versuffix=".0.0"
+	    versuffix=.0.0
 	  fi
 	fi
 
 	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
+	if test yes,no = "$avoid_version,$need_version"; then
 	  major=
 	  versuffix=
-	  verstring=""
+	  verstring=
 	fi
 
 	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    func_warning "undefined symbols not allowed in $host shared libraries"
-	    build_libtool_libs=no
-	    build_old_libs=yes
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
 	  fi
 	else
 	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
+	  allow_undefined_flag=$no_undefined_flag
 	fi
 
       fi
 
-      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_generate_dlsyms "$libname" "$libname" :
       func_append libobjs " $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
+      test " " = "$libobjs" && libobjs=
 
-      if test "$opt_mode" != relink; then
+      if test relink != "$opt_mode"; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
@@ -7550,8 +9042,8 @@
 	  case $p in
 	    *.$objext | *.gcno)
 	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
 		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 		 then
 		   continue
@@ -7567,11 +9059,11 @@
       fi
 
       # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
 	func_append oldlibs " $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
@@ -7592,13 +9084,13 @@
 	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
 
       # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
+      old_dlfiles=$dlfiles
       dlfiles=
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
@@ -7608,7 +9100,7 @@
       done
 
       # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
+      old_dlprefiles=$dlprefiles
       dlprefiles=
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
@@ -7617,7 +9109,7 @@
 	esac
       done
 
-      if test "$build_libtool_libs" = yes; then
+      if test yes = "$build_libtool_libs"; then
 	if test -n "$rpath"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -7641,7 +9133,7 @@
 	    ;;
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
+	    if test yes = "$build_libtool_need_lc"; then
 	      func_append deplibs " -lc"
 	    fi
 	    ;;
@@ -7657,9 +9149,9 @@
 	# I'm not sure if I'm treating the release correctly.  I think
 	# release should show up in the -l (ie -lgmp5) so we don't want to
 	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
+	release=
+	versuffix=
+	major=
 	newdeplibs=
 	droppeddeps=no
 	case $deplibs_check_method in
@@ -7688,20 +9180,20 @@
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
 		    func_append newdeplibs " $i"
-		    i=""
+		    i=
 		    ;;
 		  esac
 		fi
-		if test -n "$i" ; then
+		if test -n "$i"; then
 		  libname=`eval "\\$ECHO \"$libname_spec\""`
 		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
 		    func_append newdeplibs " $i"
 		  else
 		    droppeddeps=yes
@@ -7731,20 +9223,20 @@
 		$opt_dry_run || $RM conftest
 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
 		      func_append newdeplibs " $i"
-		      i=""
+		      i=
 		      ;;
 		    esac
 		  fi
-		  if test -n "$i" ; then
+		  if test -n "$i"; then
 		    libname=`eval "\\$ECHO \"$libname_spec\""`
 		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
 		      func_append newdeplibs " $i"
 		    else
 		      droppeddeps=yes
@@ -7781,24 +9273,24 @@
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
+		  a_deplib=
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		if test -n "$file_magic_glob"; then
 		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
 		else
 		  libnameglob=$libname
 		fi
-		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  if test "$want_nocaseglob" = yes; then
+		  if test yes = "$want_nocaseglob"; then
 		    shopt -s nocaseglob
 		    potential_libs=`ls $i/$libnameglob.-* 2>/dev/null`
 		    $nocaseglob
@@ -7816,25 +9308,25 @@
 		      # We might still enter an endless loop, since a link
 		      # loop can be closed while we follow links,
 		      # but so what?
-		      potlib="$potent_lib"
+		      potlib=$potent_lib
 		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
 			case $potliblink in
-			\\/* | A-Za-z:\\/*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,^/*$,,'`"$potliblink";;
+			\\/* | A-Za-z:\\/*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|^/*$||'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then
 			func_append newdeplibs " $a_deplib"
-			a_deplib=""
+			a_deplib=
 			break 2
 		      fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7842,7 +9334,7 @@
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
+		if test -z "$potlib"; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7865,30 +9357,30 @@
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
+		  a_deplib=
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname.-* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    potlib=$potent_lib # see symlink-check above in file_magic test
 		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      func_append newdeplibs " $a_deplib"
-		      a_deplib=""
+		      a_deplib=
 		      break 2
 		    fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7896,7 +9388,7 @@
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
+		if test -z "$potlib"; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7912,18 +9404,18 @@
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
-	  newdeplibs=""
+	  newdeplibs=
 	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -LR^ *//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
 	    done
 	  fi
 	  case $tmp_deplibs in
 	  *!\	\ *)
 	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
+	    if test none = "$deplibs_check_method"; then
 	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
 	      echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -7947,8 +9439,8 @@
 	  ;;
 	esac
 
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
 	    echo
 	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
@@ -7957,12 +9449,12 @@
 	    if test -z "$global_symbol_pipe"; then
 	      echo
 	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
 	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
 	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
@@ -7973,14 +9465,14 @@
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."
 
-	    if test "$allow_undefined" = no; then
+	    if test no = "$allow_undefined"; then
 	      echo
 	      echo "*** Since this library must not contain undefined symbols,"
 	      echo "*** because either the platform does not support them or"
 	      echo "*** it was explicitly requested with -no-undefined,"
 	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -8026,7 +9518,7 @@
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      deplibs="$new_libs"
+      deplibs=$new_libs
 
       # All the library-specific variables (install_libdir is set above).
       library_names=
@@ -8034,25 +9526,25 @@
       dlname=
 
       # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	# Remove ${wl} instances when linking with ld.
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
 	# FIXME: should test the right _cmds variable.
 	case $archive_cmds in
 	  *\$LD\ *) wl= ;;
         esac
-	if test "$hardcode_into_libs" = yes; then
+	if test yes = "$hardcode_into_libs"; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
 		func_replace_sysroot "$libdir"
 		libdir=$func_replace_sysroot_result
 		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
+		  hardcode_libdirs=$libdir
 		else
 		  # Just accumulate the unique libdirs.
 		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8077,7 +9569,7 @@
 	  # Substitute the hardcoded libdirs into the rpath.
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
+	    libdir=$hardcode_libdirs
 	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -8091,8 +9583,8 @@
 	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 	fi
 
-	shlibpath="$finalize_shlibpath"
-	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
@@ -8102,19 +9594,19 @@
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	shift
-	realname="$1"
+	realname=$1
 	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
-	  soname="$realname"
+	  soname=$realname
 	fi
 	if test -z "$dlname"; then
 	  dlname=$soname
 	fi
 
-	lib="$output_objdir/$realname"
+	lib=$output_objdir/$realname
 	linknames=
 	for link
 	do
@@ -8128,7 +9620,7 @@
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols="$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
 	  func_append delfiles " $export_symbols"
 	fi
 
@@ -8137,31 +9629,31 @@
 	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	    func_dll_def_p "$export_symbols" || {
 	      # and it's NOT already a .def file. Must figure out
 	      # which of the given symbols are data symbols and tag
 	      # them as such. So, trigger use of export_symbols_cmds.
 	      # export_symbols gets reassigned inside the "prepare
 	      # the list of exported symbols" if statement, so the
 	      # include_expsyms logic still works.
-	      orig_export_symbols="$export_symbols"
+	      orig_export_symbols=$export_symbols
 	      export_symbols=
 	      always_export_symbols=yes
-	    fi
+	    }
 	  fi
 	  ;;
 	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
 	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
+	    save_ifs=$IFS; IFS='~'
 	    for cmd1 in $cmds; do
-	      IFS="$save_ifs"
+	      IFS=$save_ifs
 	      # Take the normal branch if the nm_file_list_spec branch
 	      # doesn't work or if tool conversion is not needed.
 	      case $nm_file_list_spec~$to_tool_file_cmd in
@@ -8175,7 +9667,7 @@
 		  try_normal_branch=no
 		  ;;
 	      esac
-	      if test "$try_normal_branch" = yes \
+	      if test yes = "$try_normal_branch" \
 		 && { test "$len" -lt "$max_cmd_len" \
 		      || test "$max_cmd_len" -le -1; }
 	      then
@@ -8186,7 +9678,7 @@
 		output_la=$func_basename_result
 		save_libobjs=$libobjs
 		save_output=$output
-		output=${output_objdir}/${output_la}.nm
+		output=$output_objdir/$output_la.nm
 		func_to_tool_file "$output"
 		libobjs=$nm_file_list_spec$func_to_tool_file_result
 		func_append delfiles " $output"
@@ -8209,8 +9701,8 @@
 		break
 	      fi
 	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
@@ -8218,16 +9710,16 @@
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols="$export_symbols"
-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
 	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
 	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
 	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
 	  # though. Also, the filter scales superlinearly with the number of
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
@@ -8246,11 +9738,11 @@
 	    ;;
 	  esac
 	done
-	deplibs="$tmp_deplibs"
+	deplibs=$tmp_deplibs
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec" &&
-	    test "$compiler_needs_object" = yes &&
+	    test yes = "$compiler_needs_object" &&
 	    test -z "$libobjs"; then
 	    # extract the archives, so we have objects to list.
 	    # TODO: could optimize this to just extract one archive.
@@ -8261,7 +9753,7 @@
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	    test "X$libobjs" = "X " && libobjs=
 	  else
-	    gentop="$output_objdir/${outputname}x"
+	    gentop=$output_objdir/${outputname}x
 	    func_append generated " $gentop"
 
 	    func_extract_archives $gentop $convenience
@@ -8270,18 +9762,18 @@
 	  fi
 	fi
 
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  func_append linker_flags " $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
-	if test "$opt_mode" = relink; then
+	if test relink = "$opt_mode"; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
+	if test yes = "$module" && test -n "$module_cmds"; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	    eval test_cmds=\"$module_expsym_cmds\"
 	    cmds=$module_expsym_cmds
@@ -8299,7 +9791,7 @@
 	  fi
 	fi
 
-	if test "X$skipped_export" != "X:" &&
+	if test : != "$skipped_export" &&
 	   func_len " $test_cmds" &&
 	   len=$func_len_result &&
 	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -8332,8 +9824,8 @@
 	  last_robj=
 	  k=1
 
-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	    output=${output_objdir}/${output_la}.lnkscript
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
 	    func_verbose "creating GNU ld script: $output"
 	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
@@ -8345,14 +9837,14 @@
 	    func_append delfiles " $output"
 	    func_to_tool_file "$output"
 	    output=$func_to_tool_file_result
-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-	    output=${output_objdir}/${output_la}.lnk
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
 	    func_verbose "creating linker input file list: $output"
 	    : > $output
 	    set x $save_libobjs
 	    shift
 	    firstobj=
-	    if test "$compiler_needs_object" = yes; then
+	    if test yes = "$compiler_needs_object"; then
 	      firstobj="$1 "
 	      shift
 	    fi
@@ -8367,7 +9859,7 @@
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-${k}.$objext
+	      output=$output_objdir/$output_la-$k.$objext
 	      eval test_cmds=\"$reload_cmds\"
 	      func_len " $test_cmds"
 	      len0=$func_len_result
@@ -8379,13 +9871,13 @@
 		func_len " $obj"
 		func_arith $len + $func_len_result
 		len=$func_arith_result
-		if test "X$objlist" = X ||
+		if test -z "$objlist" ||
 		   test "$len" -lt "$max_cmd_len"; then
 		  func_append objlist " $obj"
 		else
 		  # The command $test_cmds is almost too long, add a
 		  # command to the queue.
-		  if test "$k" -eq 1 ; then
+		  if test 1 -eq "$k"; then
 		    # The first file doesn't have a previous command to add.
 		    reload_objs=$objlist
 		    eval concat_cmds=\"$reload_cmds\"
@@ -8395,10 +9887,10 @@
 		    reload_objs="$objlist $last_robj"
 		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
-		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  last_robj=$output_objdir/$output_la-$k.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
-		  output=$output_objdir/$output_la-${k}.$objext
+		  output=$output_objdir/$output_la-$k.$objext
 		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
@@ -8410,9 +9902,9 @@
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
 	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
 	      func_append delfiles " $output"
 
@@ -8420,9 +9912,9 @@
 	      output=
 	    fi
 
-	    if ${skipped_export-false}; then
-	      func_verbose "generating symbol list for \`$libname.la'"
-	      export_symbols="$output_objdir/$libname.exp"
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
 	      $opt_dry_run || $RM $export_symbols
 	      libobjs=$output
 	      # Append the command to create the export file.
@@ -8431,16 +9923,16 @@
 	      if test -n "$last_robj"; then
 		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	    fi
+	    }
 
 	    test -n "$save_libobjs" &&
 	      func_verbose "creating a temporary reloadable object file: $output"
 
 	    # Loop through the commands generated above and execute them.
-	    save_ifs="$IFS"; IFS='~'
+	    save_ifs=$IFS; IFS='~'
 	    for cmd in $concat_cmds; do
-	      IFS="$save_ifs"
-	      $opt_silent || {
+	      IFS=$save_ifs
+	      $opt_quiet || {
 		  func_quote_for_expand "$cmd"
 		  eval "func_echo $func_quote_for_expand_result"
 	      }
@@ -8448,7 +9940,7 @@
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
-		if test "$opt_mode" = relink; then
+		if test relink = "$opt_mode"; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
@@ -8457,7 +9949,7 @@
 		exit $lt_exit
 	      }
 	    done
-	    IFS="$save_ifs"
+	    IFS=$save_ifs
 
 	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -8465,18 +9957,18 @@
 	    fi
 	  fi
 
-          if ${skipped_export-false}; then
+          ${skipped_export-false} && {
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols="$export_symbols"
-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
 	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
 	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
 	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
 	      # though. Also, the filter scales superlinearly with the number of
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
@@ -8485,7 +9977,7 @@
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
-	  fi
+	  }
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -8499,7 +9991,7 @@
 	  # value of $libobjs for piecewise linking.
 
 	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test yes = "$module" && test -n "$module_cmds"; then
 	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	      cmds=$module_expsym_cmds
 	    else
@@ -8521,7 +10013,7 @@
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -8529,11 +10021,12 @@
 	  test "X$libobjs" = "X " && libobjs=
 	fi
 
-	save_ifs="$IFS"; IFS='~'
+	save_ifs=$IFS; IFS='~'
 	for cmd in $cmds; do
-	  IFS="$save_ifs"
+	  IFS=$sp$nl
 	  eval cmd=\"$cmd\"
-	  $opt_silent || {
+	  IFS=$save_ifs
+	  $opt_quiet || {
 	    func_quote_for_expand "$cmd"
 	    eval "func_echo $func_quote_for_expand_result"
 	  }
@@ -8541,7 +10034,7 @@
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
-	    if test "$opt_mode" = relink; then
+	    if test relink = "$opt_mode"; then
 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )
@@ -8550,10 +10043,10 @@
 	    exit $lt_exit
 	  }
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 
 	# Restore the uninstalled library and exit
-	if test "$opt_mode" = relink; then
+	if test relink = "$opt_mode"; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
@@ -8573,39 +10066,39 @@
 	done
 
 	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
+	if test yes = "$module" || test yes = "$export_dynamic"; then
 	  # On all known operating systems, these are identical.
-	  dlname="$soname"
+	  dlname=$soname
 	fi
       fi
       ;;
 
     obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for objects"
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+	func_warning "'-l' and '-L' are ignored for objects" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for objects"
+	func_warning "'-rpath' is ignored for objects"
 
       test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for objects"
+	func_warning "'-R' is ignored for objects"
 
       test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for objects"
+	func_warning "'-version-info' is ignored for objects"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for objects"
+	func_warning "'-release' is ignored for objects"
 
       case $output in
       *.lo)
 	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
 
 	libobj=$output
 	func_lo2o "$libobj"
@@ -8613,7 +10106,7 @@
 	;;
       *)
 	libobj=
-	obj="$output"
+	obj=$output
 	;;
       esac
 
@@ -8626,17 +10119,19 @@
       # the extraction.
       reload_conv_objs=
       gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD\ \$*) wl= ;;
+      esac
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
 	else
-	  gentop="$output_objdir/${obj}x"
+	  gentop=$output_objdir/${obj}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $convenience
@@ -8645,12 +10140,12 @@
       fi
 
       # If we're not building shared, we need to use non_pic_objs
-      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
 
-      output="$obj"
+      output=$obj
       func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
@@ -8662,7 +10157,7 @@
 	exit $EXIT_SUCCESS
       fi
 
-      if test "$build_libtool_libs" != yes; then
+      test yes = "$build_libtool_libs" || {
 	if test -n "$gentop"; then
 	  func_show_eval '${RM}r "$gentop"'
 	fi
@@ -8672,12 +10167,12 @@
 	# $show "echo timestamp > $libobj"
 	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
-      fi
+      }
 
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
+	output=$libobj
 	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
@@ -8694,16 +10189,14 @@
 	          output=$func_stripname_result.exe;;
       esac
       test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for programs"
+	func_warning "'-version-info' is ignored for programs"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for programs"
+	func_warning "'-release' is ignored for programs"
 
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-	&& test "$dlopen_self" = unknown \
-	&& test "$dlopen_self_static" = unknown && \
-	  func_warning "\`LT_INIT(dlopen)' not used. Assuming no dlopen support."
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT(dlopen)' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.012)
@@ -8717,11 +10210,11 @@
       *-*-darwin*)
 	# Don't allow lazy linking, it breaks C++ global constructors
 	# But is supposedly fixed on 10.4 or later (yay!).
-	if test "$tagname" = CXX ; then
+	if test CXX = "$tagname"; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.0123)
-	      func_append compile_command " ${wl}-bind_at_load"
-	      func_append finalize_command " ${wl}-bind_at_load"
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
 	    ;;
 	  esac
 	fi
@@ -8757,7 +10250,7 @@
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      compile_deplibs="$new_libs"
+      compile_deplibs=$new_libs
 
 
       func_append compile_command " $compile_deplibs"
@@ -8781,7 +10274,7 @@
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
+	      hardcode_libdirs=$libdir
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8804,7 +10297,7 @@
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  ::) dllsearchpath=$libdir;;
@@ -8821,10 +10314,10 @@
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
+	libdir=$hardcode_libdirs
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      compile_rpath="$rpath"
+      compile_rpath=$rpath
 
       rpath=
       hardcode_libdirs=
@@ -8832,7 +10325,7 @@
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
+	      hardcode_libdirs=$libdir
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8857,45 +10350,43 @@
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
+	libdir=$hardcode_libdirs
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      finalize_rpath="$rpath"
+      finalize_rpath=$rpath
 
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
 	# Transform all the library objects into standard objects.
 	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
 
       # template prelinking step
       if test -n "$prelink_cmds"; then
 	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      wrappers_required=yes
+      wrappers_required=:
       case $host in
       *cegcc* | *mingw32ce*)
         # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
+        wrappers_required=false
         ;;
       *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
+        test yes = "$build_libtool_libs" || wrappers_required=false
         ;;
       *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
         fi
         ;;
       esac
-      if test "$wrappers_required" = no; then
+      $wrappers_required || {
 	# Replace the output file specification.
 	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
+	link_command=$compile_command$compile_rpath
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	exit_status=0
@@ -8908,12 +10399,12 @@
 	fi
 
 	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.${objext}"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
 	fi
 
 	exit $exit_status
-      fi
+      }
 
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -8943,9 +10434,9 @@
 	fi
       fi
 
-      if test "$no_install" = yes; then
+      if test yes = "$no_install"; then
 	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
+	link_command=$compile_var$compile_command$compile_rpath
 	# Replace the output file specification.
 	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
@@ -8962,27 +10453,28 @@
 	exit $EXIT_SUCCESS
       fi
 
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	func_warning "this platform does not like uninstalled shared libraries"
-	func_warning "\`$output' will be relinked during installation"
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
 
       # Replace the output file specification.
       link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -9039,8 +10531,8 @@
 	    func_dirname_and_basename "$output" "" "."
 	    output_name=$func_basename_result
 	    output_path=$func_dirname_result
-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-	    cwrapper="$output_path/$output_name.exe"
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
 	    $RM $cwrappersource $cwrapper
 	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
@@ -9061,7 +10553,7 @@
 	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
 	    $opt_dry_run || {
 	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host" ; then
+	      if test "x$build" = "x$host"; then
 		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
 	      else
 		func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -9084,25 +10576,27 @@
     # See if we need to build an old-fashioned archive.
     for oldlib in $oldlibs; do
 
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save $symfileobj"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
 	  build_libtool_libs=no
-	else
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
 	  oldobjs="$old_deplibs $non_pic_objects"
-	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    func_append oldobjs " $symfileobj"
-	  fi
-	fi
-	addlibs="$old_convenience"
-      fi
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
 
       if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
+	gentop=$output_objdir/${outputname}x
 	func_append generated " $gentop"
 
 	func_extract_archives $gentop $addlibs
@@ -9110,13 +10604,13 @@
       fi
 
       # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
 	cmds=$old_archive_from_new_cmds
       else
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -9137,7 +10631,7 @@
 	  :
 	else
 	  echo "copying selected object files to avoid basename conflicts..."
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
@@ -9146,7 +10640,7 @@
 	  for obj in $save_oldobjs
 	  do
 	    func_basename "$obj"
-	    objbase="$func_basename_result"
+	    objbase=$func_basename_result
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *\ /"$objbase "*)
@@ -9215,18 +10709,18 @@
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
+	      if test "$obj" = "$last_oldobj"; then
 		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
 	      objlist=
 	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
 	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
+	  if test -z "$oldobjs"; then
 	    eval cmds=\"\$concat_cmds\"
 	  else
 	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -9243,7 +10737,7 @@
     case $output in
     *.la)
       old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      test yes = "$build_old_libs" && old_library=$libname.$libext
       func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
@@ -9258,31 +10752,31 @@
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
       relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
+      if test yes = "$hardcode_automatic"; then
 	relink_command=
       fi
 
       # Only create the output if not a dry run.
       $opt_dry_run || {
 	for installed in no yes; do
-	  if test "$installed" = yes; then
+	  if test yes = "$installed"; then
 	    if test -z "$install_libdir"; then
 	      break
 	    fi
-	    output="$output_objdir/$outputname"i
+	    output=$output_objdir/${outputname}i
 	    # Replace all uninstalled libtool libraries with the installed ones
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
 		func_basename "$deplib"
-		name="$func_basename_result"
+		name=$func_basename_result
 		func_resolve_sysroot "$deplib"
-		eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $func_resolve_sysroot_result`
+		eval libdir=`$SED -n -e 's/^libdir=$.*$$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
 		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      -L*)
@@ -9298,23 +10792,23 @@
 	      *) func_append newdependency_libs " $deplib" ;;
 	      esac
 	    done
-	    dependency_libs="$newdependency_libs"
+	    dependency_libs=$newdependency_libs
 	    newdlfiles=
 
 	    for lib in $dlfiles; do
 	      case $lib in
 	      *.la)
 	        func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib`
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=$.*$$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		  func_fatal_error "'$lib' is not a valid libtool archive"
 		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      *) func_append newdlfiles " $lib" ;;
 	      esac
 	    done
-	    dlfiles="$newdlfiles"
+	    dlfiles=$newdlfiles
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
@@ -9324,34 +10818,34 @@
 		# didn't already link the preopened objects directly into
 		# the library:
 		func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib`
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=$.*$$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		  func_fatal_error "'$lib' is not a valid libtool archive"
 		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      esac
 	    done
-	    dlprefiles="$newdlprefiles"
+	    dlprefiles=$newdlprefiles
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      case $lib in
-		\\/* | A-Za-z:\\/*) abs="$lib" ;;
+		\\/* | A-Za-z:\\/*) abs=$lib ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlfiles " $abs"
 	    done
-	    dlfiles="$newdlfiles"
+	    dlfiles=$newdlfiles
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
-		\\/* | A-Za-z:\\/*) abs="$lib" ;;
+		\\/* | A-Za-z:\\/*) abs=$lib ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlprefiles " $abs"
 	    done
-	    dlprefiles="$newdlprefiles"
+	    dlprefiles=$newdlprefiles
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
@@ -9367,10 +10861,9 @@
 	  case $host,$output,$installed,$module,$dlname in
 	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
 	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
+	      if test -n "$bindir"; then
 		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
+		tdlname=$func_relative_path_result/$dlname
 	      else
 		# Otherwise fall back on heuristic.
 		tdlname=../bin/$dlname
@@ -9379,7 +10872,7 @@
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -9393,7 +10886,7 @@
 # The name of the static archive.
 old_library='$old_library'
 
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
 inherited_linker_flags='$new_inherited_linker_flags'
 
 # Libraries that this one depends upon.
@@ -9419,7 +10912,7 @@
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
+	  if test no,yes = "$installed,$need_relink"; then
 	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
@@ -9434,27 +10927,29 @@
     exit $EXIT_SUCCESS
 }
 
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
-    func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
 
 
 # func_mode_uninstall arg...
 func_mode_uninstall ()
 {
-    $opt_debug
-    RM="$nonopt"
+    $debug_cmd
+
+    RM=$nonopt
     files=
-    rmforce=
+    rmforce=false
     exit_status=0
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic="$magic"
+    libtool_install_magic=$magic
 
     for arg
     do
       case $arg in
-      -f) func_append RM " $arg"; rmforce=yes ;;
+      -f) func_append RM " $arg"; rmforce=: ;;
       -*) func_append RM " $arg" ;;
       *) func_append files " $arg" ;;
       esac
@@ -9467,18 +10962,18 @@
 
     for file in $files; do
       func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-	odir="$objdir"
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
       else
-	odir="$dir/$objdir"
+	odir=$dir/$objdir
       fi
       func_basename "$file"
-      name="$func_basename_result"
-      test "$opt_mode" = uninstall && odir="$dir"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
 
       # Remember odir for removal later, being careful to avoid duplicates
-      if test "$opt_mode" = clean; then
+      if test clean = "$opt_mode"; then
 	case " $rmdirs " in
 	  *" $odir "*) ;;
 	  *) func_append rmdirs " $odir" ;;
@@ -9493,11 +10988,11 @@
       elif test -d "$file"; then
 	exit_status=1
 	continue
-      elif test "$rmforce" = yes; then
+      elif $rmforce; then
 	continue
       fi
 
-      rmfiles="$file"
+      rmfiles=$file
 
       case $name in
       *.la)
@@ -9511,7 +11006,7 @@
 	  done
 	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
 
-	  case "$opt_mode" in
+	  case $opt_mode in
 	  clean)
 	    case " $library_names " in
 	    *" $dlname "*) ;;
@@ -9522,12 +11017,12 @@
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -9543,21 +11038,19 @@
 	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" &&
-	     test "$pic_object" != none; then
+	  if test -n "$pic_object" && test none != "$pic_object"; then
 	    func_append rmfiles " $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" &&
-	     test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
 	    func_append rmfiles " $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
-	if test "$opt_mode" = clean ; then
+	if test clean = "$opt_mode"; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
@@ -9584,12 +11077,12 @@
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
-	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
 	      func_append rmfiles " $odir/lt-$name"
 	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
 	    fi
 	  fi
 	fi
@@ -9598,7 +11091,7 @@
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
 
-    # Try to remove the ${objdir}s in the directories where we deleted files
+    # Try to remove the $objdir's in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
 	func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -9608,16 +11101,17 @@
     exit $exit_status
 }
 
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
 
 test -z "$opt_mode" && {
-  help="$generic_help"
+  help=$generic_help
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$opt_mode'"
+  func_fatal_help "invalid operation mode '$opt_mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
@@ -9628,7 +11122,7 @@
 
 
 # The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
+# where we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,
 # since we can't tell whether shared libraries were disabled because
 # the user asked for that or because the platform doesn't support
@@ -9651,5 +11145,3 @@
 # mode:shell-script
 # sh-indentation:2
 # End:
-# vi:sw=2
-

atmos-2.97.9.tar.gz/third-party/yalpa/m4/libtool.m4 -> atmos-2.97.11.tar.gz/third-party/yalpa/m4/libtool.m4 Changed

@@ -1,8 +1,6 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
+#   Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -10,36 +8,30 @@
 # modifications, as long as this notice is preserved.
 
 m4_define(_LT_COPYING, dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 )
 
-# serial 57 LT_INIT
+# serial 58 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -67,7 +59,7 @@
 # LT_INIT(OPTIONS)
 # ------------------
 AC_DEFUN(LT_INIT,
-AC_PREREQ(2.58)dnl We use AC_INCLUDES_DEFAULT
+AC_PREREQ(2.62)dnl We use AC_PATH_PROGS_FEATURE_CHECK
 AC_REQUIRE(AC_CONFIG_AUX_DIR_DEFAULT)dnl
 AC_BEFORE($0, LT_LANG)dnl
 AC_BEFORE($0, LT_OUTPUT)dnl
@@ -91,7 +83,7 @@
 _LT_SET_OPTIONS($0, $1)
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -111,26 +103,43 @@
 dnl AC_DEFUN(AM_PROG_LIBTOOL, )
 
 
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun(_LT_PREPARE_CC_BASENAME, 
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in @S|@*""; do
+      case $cc_temp in
+        compile | *\\/compile | ccache | *\\/ccache ) ;;
+        distcc | *\\/distcc | purify | *\\/purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+)# _LT_PREPARE_CC_BASENAME
+
+
 # _LT_CC_BASENAME(CC)
 # -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
 m4_defun(_LT_CC_BASENAME,
-for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *\\/compile | ccache | *\\/ccache ) ;;
-    distcc | *\\/distcc | purify | *\\/purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+m4_require(_LT_PREPARE_CC_BASENAME)dnl
+AC_REQUIRE(_LT_DECL_SED)dnl
+AC_REQUIRE(_LT_PROG_ECHO_BACKSLASH)dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
 )
 
 
 # _LT_FILEUTILS_DEFAULTS
 # ----------------------
 # It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require(_LT_FILEUTILS_DEFAULTS)'.
+# sensibly after 'm4_require(_LT_FILEUTILS_DEFAULTS)'.
 m4_defun(_LT_FILEUTILS_DEFAULTS,
 : ${CP="cp -f"}
 : ${MV="mv -f"}
@@ -177,15 +186,16 @@
 m4_require(_LT_CMD_OLD_ARCHIVE)dnl
 m4_require(_LT_CMD_GLOBAL_SYMBOLS)dnl
 m4_require(_LT_WITH_SYSROOT)dnl
+m4_require(_LT_CMD_TRUNCATE)dnl
 
 _LT_CONFIG_LIBTOOL_INIT(
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 )
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
@@ -198,7 +208,7 @@
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
+  if test set != "${COLLECT_NAMES+set}"; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -209,14 +219,14 @@
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
@@ -269,14 +279,14 @@
 
 # _LT_PROG_LTMAIN
 # ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
 # now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
 # so we pass a copy along to make sure it has a sensible value anyway.
 m4_defun(_LT_PROG_LTMAIN,
 m4_ifdef(AC_REQUIRE_AUX_FILE, AC_REQUIRE_AUX_FILE(ltmain.sh))dnl
 _LT_CONFIG_LIBTOOL_INIT(ac_aux_dir='$ac_aux_dir')
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 )# _LT_PROG_LTMAIN
 
 
@@ -286,7 +296,7 @@
 
 # So that we can recreate a full libtool script including additional
 # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
 # label.
 
 
@@ -421,8 +431,8 @@
 
 # _LT_CONFIG_STATUS_DECLARE(VARNAME)
 # ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define(_LT_CONFIG_STATUS_DECLARE,
 $1='`$ECHO "$$1" | $SED "$delay_single_quote_subst"`')
@@ -446,7 +456,7 @@
 # Output comment and list of tags supported by the script
 m4_defun(_LT_LIBTOOL_TAGS,
 _LT_FORMAT_COMMENT(The names of the tagged configurations supported by this script)dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
 )
 
 
@@ -474,7 +484,7 @@
 # _LT_LIBTOOL_CONFIG_VARS
 # -----------------------
 # Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
 # script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
 # section) are produced by _LT_LIBTOOL_TAG_VARS.
 m4_defun(_LT_LIBTOOL_CONFIG_VARS,
@@ -500,8 +510,8 @@
 # Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
 # variables for single and double quote escaping we saved from calls
 # to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'.  Finally, any additional code accumulated
 # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
 m4_defun(_LT_CONFIG_COMMANDS,
 AC_PROVIDE_IFELSE(LT_OUTPUT,
@@ -547,7 +557,7 @@
 , lt_decl_quote_varnames); do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *\\\\\\\`\\"\\\$*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -560,7 +570,7 @@
 , lt_decl_dquote_varnames); do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *\\\\\\\`\\"\\\$*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -576,7 +586,7 @@
 # Generate a child script FILE with all initialization necessary to
 # reuse the environment learned by the parent script, and make the
 # file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
+# '#!' sequence but before initialization text begins.  After this
 # macro, additional text can be appended to FILE to form the body of
 # the child script.  The macro ends with non-zero status if the
 # file could not be fully written (such as if the disk is full).
@@ -598,7 +608,7 @@
 _AS_PREPARE
 exec AS_MESSAGE_FD>&1
 _ASEOF
-test $lt_write_fail = 0 && chmod +x $1dnl
+test 0 = "$lt_write_fail" && chmod +x $1dnl
 m4_popdef(AS_MESSAGE_LOG_FD)))# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
@@ -621,7 +631,7 @@
 } >&AS_MESSAGE_LOG_FD
 
 lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
 for use in further configure time tests before the real libtool is
 generated.
 
@@ -643,7 +653,7 @@
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
-while test $# != 0
+while test 0 != $#
 do
   case $1 in
     --version | --v* | -V )
@@ -656,10 +666,10 @@
       lt_cl_silent=: ;;
 
     -*) AC_MSG_ERROR(unrecognized option: $1
-Try \`$0 --help' for more information.) ;;
+Try '$0 --help' for more information.) ;;
 
     *) AC_MSG_ERROR(unrecognized argument: $1
-Try \`$0 --help' for more information.) ;;
+Try '$0 --help' for more information.) ;;
   esac
   shift
 done
@@ -685,7 +695,7 @@
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
 lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
   lt_config_lt_args="$lt_config_lt_args --quiet"
 exec AS_MESSAGE_LOG_FD>/dev/null
 $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
@@ -705,27 +715,30 @@
 _LT_CONFIG_SAVE_COMMANDS(
   m4_define(_LT_TAG, m4_if($1, , C, $1))dnl
   m4_if(_LT_TAG, C, 
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
 _LT_COPYING
 _LT_LIBTOOL_TAGS
 
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
 # ### BEGIN LIBTOOL CONFIG
 _LT_LIBTOOL_CONFIG_VARS
 _LT_LIBTOOL_TAG_VARS
@@ -733,13 +746,24 @@
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -756,8 +780,6 @@
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
-  _LT_PROG_REPLACE_SHELLFNS
-
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
@@ -775,7 +797,6 @@
 m4_if($1, , 
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile', )
 )dnl /_LT_CONFIG_SAVE_COMMANDS
@@ -974,7 +995,7 @@
 
     AC_CACHE_CHECK(for -single_module linker flag,lt_cv_apple_cc_single_mod,
       lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
+      if test -z "$LT_MULTI_MODULE"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
@@ -992,7 +1013,7 @@
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1010,7 +1031,7 @@
       AC_LINK_IFELSE(AC_LANG_PROGRAM(,),
 	lt_cv_ld_exported_symbols_list=yes,
 	lt_cv_ld_exported_symbols_list=no)
-	LDFLAGS="$save_LDFLAGS"
+	LDFLAGS=$save_LDFLAGS
     )
 
     AC_CACHE_CHECK(for -force_load linker flag,lt_cv_ld_force_load,
@@ -1032,7 +1053,7 @@
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&AS_MESSAGE_LOG_FD
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1042,32 +1063,32 @@
     )
     case $host_os in
     rhapsody* | darwin1.012)
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin91*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.012*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.012,.*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
 	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
       _lt_dar_single_mod='$single_module'
     fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
     else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -1087,29 +1108,29 @@
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
     m4_case($1, F77, _LT_TAGVAR(compiler_needs_object, $1)=yes,
                   FC,  _LT_TAGVAR(compiler_needs_object, $1)=yes)
   else
     _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   fi
   _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
     m4_if($1, CXX,
-   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+   if test yes != "$lt_cv_apple_cc_single_mod"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
     fi
 ,)
   else
@@ -1129,7 +1150,7 @@
 # Allow to override them for all tags through lt_cv_aix_libpath.
 m4_defun(_LT_SYS_MODULE_PATH_AIX,
 m4_require(_LT_DECL_SED)dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   AC_CACHE_VAL(_LT_TAGVAR(lt_cv_aix_libpath_, $1),
@@ -1147,7 +1168,7 @@
     _LT_TAGVAR(lt_cv_aix_libpath_, $1)=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
   fi,)
   if test -z "$_LT_TAGVAR(lt_cv_aix_libpath_, $1)"; then
-    _LT_TAGVAR(lt_cv_aix_libpath_, $1)="/usr/lib:/lib"
+    _LT_TAGVAR(lt_cv_aix_libpath_, $1)=/usr/lib:/lib
   fi
   )
   aix_libpath=$_LT_TAGVAR(lt_cv_aix_libpath_, $1)
@@ -1167,8 +1188,8 @@
 # -----------------------
 # Find how we can fake an echo command that does not interpret backslash.
 # In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
 m4_defun(_LT_PROG_ECHO_BACKSLASH,
 ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
@@ -1196,10 +1217,10 @@
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
-    $ECHO "$*" 
+    $ECHO "$*"
 }
 
-case "$ECHO" in
+case $ECHO in
   printf*) AC_MSG_RESULT(printf) ;;
   print*) AC_MSG_RESULT(print -r) ;;
   *) AC_MSG_RESULT(cat) ;;
@@ -1225,16 +1246,17 @@
 AC_DEFUN(_LT_WITH_SYSROOT,
 AC_MSG_CHECKING(for sysroot)
 AC_ARG_WITH(sysroot,
-  --with-sysroot=DIR Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).,
+AS_HELP_STRING(--with-sysroot@<:@=DIR@:>@,
+  Search for dependent libraries within DIR (or the compiler's sysroot
+   if not specified).),
 , with_sysroot=no)
 
 dnl lt_sysroot will always be passed unquoted.  We quote it here
 dnl in case the user passed a directory name.
 lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
  yes)
-   if test "$GCC" = yes; then
+   if test yes = "$GCC"; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
@@ -1244,14 +1266,14 @@
  no|'')
    ;; #(
  *)
-   AC_MSG_RESULT(${with_sysroot})
+   AC_MSG_RESULT($with_sysroot)
    AC_MSG_ERROR(The sysroot must be an absolute path.)
    ;;
 esac
 
  AC_MSG_RESULT(${lt_sysroot:-no})
 _LT_DECL(, lt_sysroot, 0, The root where to search for dnl
-dependent libraries, and in which our libraries should be installed.))
+dependent libraries, and where our libraries should be installed.))
 
 # _LT_ENABLE_LOCK
 # ---------------
@@ -1259,31 +1281,33 @@
 AC_ARG_ENABLE(libtool-lock,
   AS_HELP_STRING(--disable-libtool-lock,
     avoid locking (might break parallel builds)))
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
-	HPUX_IA64_MODE="32"
+	HPUX_IA64_MODE=32
 	;;
       *ELF-64*)
-	HPUX_IA64_MODE="64"
+	HPUX_IA64_MODE=64
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
@@ -1312,9 +1336,46 @@
   rm -rf conftest*
   ;;
 
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
@@ -1324,7 +1385,14 @@
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
 	    ;;
 	  powerpc64le-*linux*)
 	    LD="${LD-ld} -m elf32lppclinux"
@@ -1369,19 +1437,20 @@
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
+  SAVE_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK(whether the C compiler needs -belf, lt_cv_cc_needs_belf,
     AC_LANG_PUSH(C)
      AC_LINK_IFELSE(AC_LANG_PROGRAM(,),lt_cv_cc_needs_belf=yes,lt_cv_cc_needs_belf=no)
      AC_LANG_POP)
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+  if test yes != "$lt_cv_cc_needs_belf"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+    CFLAGS=$SAVE_CFLAGS
   fi
   ;;
 *-*solaris*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
@@ -1389,7 +1458,7 @@
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
-        i?86-*-solaris*)
+        i?86-*-solaris*|x86_64-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
@@ -1398,7 +1467,7 @@
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
+          LD=${LD-ld}_sol2
         fi
         ;;
       *)
@@ -1414,7 +1483,7 @@
   ;;
 esac
 
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
 )# _LT_ENABLE_LOCK
 
 
@@ -1433,11 +1502,11 @@
      echo conftest.$ac_objext > conftest.lst
       lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
       AC_TRY_EVAL(lt_ar_try)
-      if test "$ac_status" -eq 0; then
+      if test 0 -eq "$ac_status"; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	AC_TRY_EVAL(lt_ar_try)
-	if test "$ac_status" -ne 0; then
+	if test 0 -ne "$ac_status"; then
           lt_cv_ar_at_file=@
         fi
       fi
@@ -1445,7 +1514,7 @@
      )
   )
 
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
@@ -1476,7 +1545,7 @@
 
 if test -n "$RANLIB"; then
   case $host_os in
-  openbsd*)
+  bitrig* | openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
@@ -1512,7 +1581,7 @@
   $2=no
    m4_if($4, , ac_outfile=conftest.$ac_objext, ac_outfile=$4)
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
+   lt_compiler_flag="$3"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -1539,7 +1608,7 @@
    $RM conftest*
 )
 
-if test x"$$2" = xyes; then
+if test yes = "$$2"; then
     m4_if($5, , :, $5)
 else
     m4_if($6, , :, $6)
@@ -1561,7 +1630,7 @@
 m4_require(_LT_DECL_SED)dnl
 AC_CACHE_CHECK($1, $2,
   $2=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $3"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -1580,10 +1649,10 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 )
 
-if test x"$$2" = xyes; then
+if test yes = "$$2"; then
     m4_if($4, , :, $4)
 else
     m4_if($5, , :, $5)
@@ -1604,7 +1673,7 @@
 AC_MSG_CHECKING(the maximum length of command line arguments)
 AC_CACHE_VAL(lt_cv_sys_max_cmd_len, dnl
   i=0
-  teststring="ABCD"
+  teststring=ABCD
 
   case $build_os in
   msdosdjgpp*)
@@ -1644,7 +1713,7 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -1694,22 +1763,23 @@
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
+      for i in 1 2 3 4 5 6 7 8; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
+	      test 17 != "$i" # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
@@ -1725,7 +1795,7 @@
     ;;
   esac
 )
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
   AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
 else
   AC_MSG_RESULT(none)
@@ -1753,7 +1823,7 @@
 # ----------------------------------------------------------------
 m4_defun(_LT_TRY_DLOPEN_SELF,
 m4_require(_LT_HEADER_DLFCN)dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
   $4
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -1800,9 +1870,9 @@
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -1828,7 +1898,7 @@
   return status;
 }
 _LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+  if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -1849,7 +1919,7 @@
 # ------------------
 AC_DEFUN(LT_SYS_DLOPEN_SELF,
 m4_require(_LT_HEADER_DLFCN)dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -1859,44 +1929,52 @@
 
   case $host_os in
   beos*)
-    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen=load_add_on
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen=LoadLibrary
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
-    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen=dlopen
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
-  # if libdl is installed we need to link against it
+    # if libdl is installed we need to link against it
     AC_CHECK_LIB(dl, dlopen,
-		lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl",
-    lt_cv_dlopen="dyld"
+		lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl,
+    lt_cv_dlopen=dyld
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     )
     ;;
 
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
   *)
     AC_CHECK_FUNC(shl_load,
-	  lt_cv_dlopen="shl_load",
+	  lt_cv_dlopen=shl_load,
       AC_CHECK_LIB(dld, shl_load,
-	    lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld",
+	    lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld,
 	AC_CHECK_FUNC(dlopen,
-	      lt_cv_dlopen="dlopen",
+	      lt_cv_dlopen=dlopen,
 	  AC_CHECK_LIB(dl, dlopen,
-		lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl",
+		lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl,
 	    AC_CHECK_LIB(svld, dlopen,
-		  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld",
+		  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld,
 	      AC_CHECK_LIB(dld, dld_link,
-		    lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld")
+		    lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld)
 	      )
 	    )
 	  )
@@ -1905,21 +1983,21 @@
     ;;
   esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
+  if test no = "$lt_cv_dlopen"; then
     enable_dlopen=no
+  else
+    enable_dlopen=yes
   fi
 
   case $lt_cv_dlopen in
   dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
+    save_LDFLAGS=$LDFLAGS
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
+    save_LIBS=$LIBS
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     AC_CACHE_CHECK(whether a program can dlopen itself,
@@ -1929,7 +2007,7 @@
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     )
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
+    if test yes = "$lt_cv_dlopen_self"; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK(whether a statically linked program can dlopen itself,
 	  lt_cv_dlopen_self_static, dnl
@@ -1939,9 +2017,9 @@
       )
     fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
     ;;
   esac
 
@@ -2033,8 +2111,8 @@
 m4_require(_LT_FILEUTILS_DEFAULTS)dnl
 _LT_COMPILER_C_O($1)
 
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING(if we can lock with hard links)
   hard_links=yes
@@ -2044,8 +2122,8 @@
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   AC_MSG_RESULT($hard_links)
-  if test "$hard_links" = no; then
-    AC_MSG_WARN(`$CC' does not support `-c -o', so `make -j' may be unsafe)
+  if test no = "$hard_links"; then
+    AC_MSG_WARN('$CC' does not support '-c -o', so 'make -j' may be unsafe)
     need_locks=warn
   fi
 else
@@ -2072,8 +2150,8 @@
 _LT_DECL(, objdir, 0,
          The name of the directory that contains temporary libtool files)dnl
 m4_pattern_allow(LT_OBJDIR)dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  Define to the sub-directory in which libtool stores uninstalled libraries.)
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  Define to the sub-directory where libtool stores uninstalled libraries.)
 )# _LT_CHECK_OBJDIR
 
 
@@ -2085,15 +2163,15 @@
 _LT_TAGVAR(hardcode_action, $1)=
 if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
    test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+   test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
 
   # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+  if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+     test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
     # Linking always hardcodes the temporary library directory.
     _LT_TAGVAR(hardcode_action, $1)=relink
   else
@@ -2107,12 +2185,12 @@
 fi
 AC_MSG_RESULT($_LT_TAGVAR(hardcode_action, $1))
 
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+   test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -2136,7 +2214,7 @@
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
-    if test -n "$STRIP" ; then
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       AC_MSG_RESULT(yes)
@@ -2154,6 +2232,47 @@
 )# _LT_CMD_STRIPLIB
 
 
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun(_LT_PREPARE_MUNGE_PATH_LIST,
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR:DIR:"
+#       string "DIR DIR" will be prepended to VARIABLE
+# ":DIR:DIR"
+#       string "DIR DIR" will be appended to VARIABLE
+# "DIRP:DIRP::DIRA:DIRA"
+#       string "DIRP DIRP" will be prepended to VARIABLE and string
+#       "DIRA DIRA" will be appended to VARIABLE
+# "DIR:DIR"
+#       VARIABLE will be replaced by "DIR DIR"
+func_munge_path_list ()
+{
+    case x@S|@2 in
+    x)
+        ;;
+    *:)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+        ;;
+    x:*)
+        eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+        ;;
+    *)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+)# _LT_PREPARE_PATH_LIST
+
+
 # _LT_SYS_DYNAMIC_LINKER(TAG)
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
@@ -2164,17 +2283,18 @@
 m4_require(_LT_DECL_OBJDUMP)dnl
 m4_require(_LT_DECL_SED)dnl
 m4_require(_LT_CHECK_SHELL_FEATURES)dnl
+m4_require(_LT_PREPARE_MUNGE_PATH_LIST)dnl
 AC_MSG_CHECKING(dynamic linker characteristics)
 m4_if($1,
 	, 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
   esac
   case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=$A-Za-z:$,\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
+    mingw* | cegcc*) lt_sed_strip_eq='s|=$A-Za-z:$|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
@@ -2190,28 +2310,35 @@
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
+  # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
   for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
+          lt_foo = "/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
@@ -2225,7 +2352,7 @@
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/$A-Za-z:$,\1,g'` ;;
+      $SED 's|/$A-Za-z:$|\1|g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
@@ -2234,7 +2361,7 @@
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -2251,14 +2378,17 @@
 # flags to be left without arguments
 need_version=unknown
 
+AC_ARG_VAR(LT_SYS_LIBRARY_PATH,
+User-defined run-time library search path.)
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix4-9*)
@@ -2266,41 +2396,91 @@
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.01 | aix4.01.*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -2310,18 +2490,18 @@
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/$^/*$\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/$^/*$\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -2329,8 +2509,8 @@
 bsdi45*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -2342,7 +2522,7 @@
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -2351,8 +2531,8 @@
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -2368,17 +2548,17 @@
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
 m4_if($1, ,
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api")
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -2387,8 +2567,8 @@
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -2415,7 +2595,7 @@
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';c-zC-Z:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -2428,8 +2608,8 @@
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -2442,7 +2622,7 @@
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/./-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -2455,8 +2635,8 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -2469,8 +2649,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -2488,12 +2668,13 @@
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -2518,26 +2699,15 @@
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -2555,14 +2725,15 @@
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -2570,8 +2741,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -2580,8 +2751,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -2594,8 +2765,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -2606,7 +2777,7 @@
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -2614,8 +2785,8 @@
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -2634,8 +2805,8 @@
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -2644,13 +2815,33 @@
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -2675,7 +2866,12 @@
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^	 *hwcap	 /d;s/:,	/ /g;s/=^=*$//;s/=^= * / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -2695,12 +2891,12 @@
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -2710,7 +2906,7 @@
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -2719,58 +2915,68 @@
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.89 | openbsd2.89.*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -2781,8 +2987,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -2792,11 +2998,11 @@
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -2804,8 +3010,8 @@
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -2826,24 +3032,24 @@
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -2861,7 +3067,7 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -2869,8 +3075,8 @@
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -2879,20 +3085,30 @@
   ;;
 esac
 AC_MSG_RESULT($dynamic_linker)
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
 _LT_DECL(, variables_saved_for_relink, 1,
     Variables whose values should be saved in libtool wrapper scripts and
     restored at link time)
@@ -2925,39 +3141,41 @@
     Whether we should hardcode library paths into libraries)
 _LT_DECL(, sys_lib_search_path_spec, 2,
     Compile-time system search path for libraries)
-_LT_DECL(, sys_lib_dlsearch_path_spec, 2,
-    Run-time system search path for libraries)
+_LT_DECL(sys_lib_dlsearch_path_spec, configure_time_dlsearch_path, 2,
+    Detected run-time system search path for libraries)
+_LT_DECL(, configure_time_lt_sys_library_path, 2,
+    Explicit LT_SYS_LIBRARY_PATH set during ./configure time)
 )# _LT_SYS_DYNAMIC_LINKER
 
 
 # _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
 AC_DEFUN(_LT_PATH_TOOL_PREFIX,
 m4_require(_LT_DECL_EGREP)dnl
 AC_MSG_CHECKING(for $1)
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 case $MAGIC_CMD in
 \\/* |  ?:\\/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
   ac_dummy="m4_if($2, , $PATH, $2)"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+    if test -f "$ac_dir/$1"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic $.*$"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -2980,11 +3198,11 @@
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac)
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   AC_MSG_RESULT($MAGIC_CMD)
 else
@@ -3002,7 +3220,7 @@
 
 # _LT_PATH_MAGIC
 # --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
 m4_defun(_LT_PATH_MAGIC,
 _LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -3029,16 +3247,16 @@
 AC_ARG_WITH(gnu-ld,
     AS_HELP_STRING(--with-gnu-ld,
 	assume the C compiler uses GNU ld @<:@default=no@:>@),
-    test "$withval" = no || with_gnu_ld=yes,
+    test no = "$withval" || with_gnu_ld=yes,
     with_gnu_ld=no)dnl
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   AC_MSG_CHECKING(for ld used by $CC)
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -3052,7 +3270,7 @@
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -3063,37 +3281,37 @@
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   AC_MSG_CHECKING(for GNU ld)
 else
   AC_MSG_CHECKING(for non-GNU ld)
 fi
 AC_CACHE_VAL(lt_cv_path_LD,
 if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi)
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   AC_MSG_RESULT($LD)
 else
@@ -3147,13 +3365,13 @@
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       reload_cmds=false
     fi
     ;;
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
@@ -3164,6 +3382,43 @@
 )# _LT_CMD_RELOAD
 
 
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun(_LT_PATH_DD,
+AC_CACHE_CHECK(for a working dd, ac_cv_path_lt_DD,
+printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK(lt_DD, dd,
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi)
+rm -f conftest.i conftest2.i conftest.out)
+)# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun(_LT_CMD_TRUNCATE,
+m4_require(_LT_PATH_DD)
+AC_CACHE_CHECK(how to truncate binary pipes, lt_cv_truncate_bin,
+printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q")
+_LT_DECL(lt_truncate_bin, lt_cv_truncate_bin, 1,
+  Command to truncate a binary pipe)
+)# _LT_CMD_TRUNCATE
+
+
 # _LT_CHECK_MAGIC_METHOD
 # ----------------------
 # how to check for library dependencies
@@ -3179,13 +3434,13 @@
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic regex' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix4-9*)
@@ -3212,8 +3467,7 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
@@ -3249,10 +3503,6 @@
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -3291,7 +3541,7 @@
   ;;
 
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -3313,8 +3563,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
     lt_cv_deplibs_check_method='match_pattern /lib^/+(\.so\.0-9+\.0-9+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib^/+(\.so\.0-9+\.0-9+|_pic\.a)$'
@@ -3367,6 +3617,9 @@
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 )
 
@@ -3407,33 +3660,38 @@
 AC_CACHE_CHECK(for BSD- or MS-compatible name lister (nm), lt_cv_path_NM,
 if test -n "$NM"; then
   # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  lt_cv_path_NM=$NM
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
+  lt_nm_to_check=${ac_tool_prefix}nm
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
 	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
-	  break
+	  break 2
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
-	    break
+	    break 2
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -3444,21 +3702,21 @@
 	esac
       fi
     done
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
   done
   : ${lt_cv_path_NM=no}
 fi)
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
     # Let the user override the test.
   else
     AC_CHECK_TOOLS(DUMPBIN, dumpbin "link -dump", :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
+      DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
     *)
       DUMPBIN=:
@@ -3466,8 +3724,8 @@
     esac
   fi
   AC_SUBST(DUMPBIN)
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
   fi
 fi
 test -z "$NM" && NM=nm
@@ -3513,8 +3771,8 @@
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -3526,7 +3784,7 @@
   ;;
 *)
   # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
   ;;
 esac
 )
@@ -3553,13 +3811,28 @@
     lt_cv_path_mainfest_tool=yes
   fi
   rm -f conftest*)
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
   MANIFEST_TOOL=:
 fi
 _LT_DECL(, MANIFEST_TOOL, 1, Manifest tool)dnl
 )# _LT_PATH_MANIFEST_TOOL
 
 
+# _LT_DLL_DEF_P(FILE)
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN(_LT_DLL_DEF_P,
+dnl
+  test DEF = "`$SED -n dnl
+    -e '\''s/^	 *//'\'' dnl Strip leading whitespace
+    -e '\''/^$;.*$*$/d'\'' dnl      Delete empty lines and comments
+    -e '\''s/^$EXPORTS\|LIBRARY$$	 .*$*$/DEF/p'\'' dnl
+    -e q dnl                          Only consider the first "real" line
+    $1`" dnl
+)# _LT_DLL_DEF_P
+
+
 # LT_LIB_M
 # --------
 # check for math library
@@ -3571,11 +3844,11 @@
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
   AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
   ;;
 *)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  AC_CHECK_LIB(m, cos, LIBM=-lm)
   ;;
 esac
 AC_SUBST(LIBM)
@@ -3594,7 +3867,7 @@
 
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $cc_basename in
   nvcc*)
     _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
@@ -3646,7 +3919,7 @@
   symcode='ABCDGISTW'
   ;;
 hpux*)
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     symcode='ABCDEGRST'
   fi
   ;;
@@ -3679,14 +3952,44 @@
   symcode='ABCDGIRSTW' ;;
 esac
 
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* $.*$$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* $.*$$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* $.*$$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* $lib.*$$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* $.*$$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* $.*$$/extern int \1();/p' -e 's/^$symcode* .* $.*$$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* $.*$$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* $.*$$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: $^ *$ *$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $^ *$ $^ *$$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: $^ *$ *$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* $^ *$ $lib^ *$$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* $^ *$ $^ *$$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: $.*$ .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* $.*$$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: $.*$ .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* $lib.*$$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* $.*$$/  {\"lib\1\", (void *) \&\1},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -3704,21 +4007,24 @@
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hidei};"\
 "     /Section length .*#relocs.*(pick any)/{hidelast_section=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn2,2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF $^|$*()/{next};"\
 "     {if(hidesection) next};"\
-"     {f=0}; \$ 0~/.*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a2, s)};"\
-"     s1~/^@?/{print s1, s1; next};"\
-"     s1~prfx {split(s1,t,\"@\"); print t1, substr(t1,length(prfx))}"\
+"     {f=\"D\"}; \$ 0~/.*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a2,s)};"\
+"     s1~/^@?/{print f,s1,s1; next};"\
+"     s1~prfx {split(s1,t,\"@\"); print f,t1,substr(t1,length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*	 $$symcode$symcode*$	 	 *$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -3758,11 +4064,11 @@
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT@&t@_DLSYM_CONST
 #else
@@ -3788,7 +4094,7 @@
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
-	  $SED "s/^$symcode$symcode* $.*$ $.*$$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  $SED "s/^$symcode$symcode* .* $.*$$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
@@ -3808,9 +4114,9 @@
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
+	  LIBS=conftstm.$ac_objext
 	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
@@ -3831,7 +4137,7 @@
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
+  if test yes = "$pipe_works"; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
@@ -3858,12 +4164,16 @@
     Take the output of nm and produce a listing of raw symbols and C names)
 _LT_DECL(global_symbol_to_cdecl, lt_cv_sys_global_symbol_to_cdecl, 1,
     Transform the output of nm in a proper C declaration)
+_LT_DECL(global_symbol_to_import, lt_cv_sys_global_symbol_to_import, 1,
+    Transform the output of nm into a list of symbols to manually relocate)
 _LT_DECL(global_symbol_to_c_name_address,
     lt_cv_sys_global_symbol_to_c_name_address, 1,
     Transform the output of nm in a C name address pair)
 _LT_DECL(global_symbol_to_c_name_address_lib_prefix,
     lt_cv_sys_global_symbol_to_c_name_address_lib_prefix, 1,
     Transform the output of nm in a C name address pair when lib prefix is needed)
+_LT_DECL(nm_interface, lt_cv_nm_interface, 1,
+    The name lister interface)
 _LT_DECL(, nm_file_list_spec, 1,
     Specify filename containing input files for $NM)
 ) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3879,17 +4189,18 @@
 
 m4_if($1, CXX, 
   # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
+  if test yes = "$GXX"; then
     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
 
     amigaos*)
@@ -3900,8 +4211,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -3917,6 +4228,11 @@
       # (--disable-auto-import) libraries
       m4_if($1, GCJ, ,
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT')
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -3966,7 +4282,7 @@
     case $host_os in
       aix4-9*)
 	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	  # AIX 5 now supports IA64 processor
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	else
@@ -4007,14 +4323,14 @@
 	case $cc_basename in
 	  CC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
 	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
 	  aCC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
@@ -4043,7 +4359,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -4051,7 +4367,7 @@
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
 	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    # old Intel C++ for x86_64, which still supported -KPIC.
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -4196,17 +4512,18 @@
   fi
 ,
 
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
 
     amigaos*)
@@ -4217,8 +4534,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -4235,6 +4552,11 @@
       # (--disable-auto-import) libraries
       m4_if($1, GCJ, ,
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT')
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -4305,7 +4627,7 @@
     case $host_os in
     aix*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
@@ -4313,11 +4635,30 @@
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       m4_if($1, GCJ, ,
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT')
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -4333,7 +4674,7 @@
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -4342,9 +4683,9 @@
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4369,6 +4710,12 @@
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -4466,7 +4813,7 @@
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
@@ -4495,7 +4842,7 @@
   fi
 )
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     _LT_TAGVAR(lt_prog_compiler_pic, $1)=
     ;;
@@ -4561,17 +4908,21 @@
   case $host_os in
   aix4-9*)
     # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
     else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B$^B*$$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
@@ -4617,9 +4968,9 @@
   # included in the symbol list
   _LT_TAGVAR(include_expsyms, $1)=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   _LT_TAGVAR(exclude_expsyms, $1)='_GLOBAL_OFFSET_TABLE_|_GLOBAL__FID_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -4635,7 +4986,7 @@
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -4643,7 +4994,7 @@
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -4653,7 +5004,7 @@
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -4675,24 +5026,24 @@
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ 01.* | *\ 2.0-9.* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -4705,7 +5056,7 @@
     case $host_os in
     aix3-9*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
@@ -4724,7 +5075,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             _LT_TAGVAR(archive_expsym_cmds, $1)=''
         ;;
       m68k)
@@ -4740,7 +5091,7 @@
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4750,7 +5101,7 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -4758,61 +5109,89 @@
       _LT_TAGVAR(exclude_expsyms, $1)='_+GLOBAL_OFFSET_TABLE_|_+GLOBAL__FID_.*|_+head_A-Za-z0-9_+_dll|A-Za-z0-9_+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P($export_symbols); then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^$.*$$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
     interix3-9*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -4823,42 +5202,47 @@
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xlcC* | bgxlcC* | mpixlcC*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -4872,8 +5256,8 @@
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -4891,8 +5275,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4904,7 +5288,7 @@
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -4919,9 +5303,9 @@
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
@@ -4938,15 +5322,15 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
     esac
 
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+    if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
       runpath_var=
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
       _LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -4962,7 +5346,7 @@
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -4970,34 +5354,57 @@
       ;;
 
     aix4-9*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B$^B*$$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.23|aix4.23.*|aix5-9*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -5016,13 +5423,21 @@
       _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+      _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.012|aix4.012.*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -5041,61 +5456,80 @@
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
         _LT_SYS_MODULE_PATH_AIX($1)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
 	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
 	 _LT_SYS_MODULE_PATH_AIX($1)
-	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  fi
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\$, \$%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -5104,7 +5538,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             _LT_TAGVAR(archive_expsym_cmds, $1)=''
         ;;
       m68k)
@@ -5134,16 +5568,17 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P($export_symbols); then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5152,18 +5587,18 @@
 	# Don't use ranlib
 	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
 	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -5172,7 +5607,7 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -5222,33 +5657,33 @@
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(hardcode_direct, $1)=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -5256,25 +5691,25 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	m4_if($1, , 
@@ -5282,14 +5717,14 @@
 	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
 	  _LT_LINKER_OPTION(if $CC understands -b,
 	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), -b,
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags',
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags',
 	    _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'),
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags')
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags')
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	case $host_cpu in
@@ -5300,7 +5735,7 @@
 	*)
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -5311,16 +5746,16 @@
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
 	# This should be the same for all languages, so no per-tag cache variable.
 	AC_CACHE_CHECK(whether the $host_os linker accepts -exported_symbol,
 	  lt_cv_irix_exported_symbol,
-	  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   AC_LINK_IFELSE(
 	     AC_LANG_SOURCE(
 	        AC_LANG_CASE(C, int foo (void) { return 0; },
@@ -5333,21 +5768,31 @@
       end)),
 	      lt_cv_irix_exported_symbol=yes,
 	      lt_cv_irix_exported_symbol=no)
-           LDFLAGS="$save_LDFLAGS")
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+           LDFLAGS=$save_LDFLAGS)
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(inherit_rpath, $1)=yes
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -5362,7 +5807,7 @@
     newsos6)
       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
@@ -5370,27 +5815,19 @@
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 	else
-	  case $host_os in
-	   openbsd01.* | openbsd2.0-7 | openbsd2.0-7.*)
-	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
 	fi
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5401,33 +5838,53 @@
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^$.*$$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5438,24 +5895,24 @@
 
     solaris*)
       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -5465,11 +5922,11 @@
       solaris2.0-5 | solaris2.0-5.*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	fi
@@ -5479,10 +5936,10 @@
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -5531,43 +5988,43 @@
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.01.10* | unixware7* | sco3.2v5.0.024*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -5582,17 +6039,17 @@
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
 	;;
       esac
     fi
   fi
 )
 AC_MSG_RESULT($_LT_TAGVAR(ld_shlibs, $1))
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
 
 _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
 
@@ -5609,7 +6066,7 @@
   # Assume -lc should be added
   _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $_LT_TAGVAR(archive_cmds, $1) in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -5689,12 +6146,12 @@
 _LT_TAGDECL(, hardcode_libdir_separator, 1,
     Whether we need a single "-rpath" flag with a separated argument)
 _LT_TAGDECL(, hardcode_direct, 0,
-    Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
     DIR into the resulting binary)
 _LT_TAGDECL(, hardcode_direct_absolute, 0,
-    Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
     DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    "absolute", i.e impossible to change by setting $shlibpath_var if the
     library is relocated)
 _LT_TAGDECL(, hardcode_minus_L, 0,
     Set to "yes" if using the -LDIR flag during linking hardcodes DIR
@@ -5735,10 +6192,10 @@
 # ------------------------
 # Ensure that the configuration variables for a C compiler are suitably
 # defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_C_CONFIG,
 m4_require(_LT_DECL_EGREP)dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
 AC_LANG_PUSH(C)
 
 # Source file extension for C test sources.
@@ -5778,18 +6235,18 @@
   LT_SYS_DLOPEN_SELF
   _LT_CMD_STRIPLIB
 
-  # Report which library types will actually be built
+  # Report what library types will actually be built
   AC_MSG_CHECKING(if libtool supports shared libraries)
   AC_MSG_RESULT($can_build_shared)
 
   AC_MSG_CHECKING(whether to build shared libraries)
-  test "$can_build_shared" = "no" && enable_shared=no
+  test no = "$can_build_shared" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
-    test "$enable_shared" = yes && enable_static=no
+    test yes = "$enable_shared" && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
@@ -5797,8 +6254,12 @@
     ;;
 
   aix4-9*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
     fi
     ;;
   esac
@@ -5806,13 +6267,13 @@
 
   AC_MSG_CHECKING(whether to build static libraries)
   # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
+  test yes = "$enable_shared" || enable_static=yes
   AC_MSG_RESULT($enable_static)
 
   _LT_CONFIG($1)
 fi
 AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
 )# _LT_LANG_C_CONFIG
 
 
@@ -5820,14 +6281,14 @@
 # --------------------------
 # Ensure that the configuration variables for a C++ compiler are suitably
 # defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_CXX_CONFIG,
 m4_require(_LT_FILEUTILS_DEFAULTS)dnl
 m4_require(_LT_DECL_EGREP)dnl
 m4_require(_LT_PATH_MANIFEST_TOOL)dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
   AC_PROG_CXXCPP
 else
   _lt_caught_CXX_error=yes
@@ -5869,7 +6330,7 @@
 # the CXX compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="int some_variable = 0;"
 
@@ -5911,35 +6372,35 @@
   if test -n "$compiler"; then
     # We don't want -fno-exception when compiling C++ code, so set the
     # no_builtin_flag separately
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
     else
       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
     fi
 
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       # Set up default GNU C++ configuration
 
       LT_PATH_LD
 
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if test yes = "$with_gnu_ld"; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
 
         # If archive_cmds runs LD, not CC, wlarc should be empty
         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
         #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
+        wlarc='$wl'
 
         # ancient GNU ld didn't support --whole-archive et. al.
         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 	  $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
         else
           _LT_TAGVAR(whole_archive_flag_spec, $1)=
         fi
@@ -5975,18 +6436,30 @@
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
       aix4-9*)
-        if test "$host_cpu" = ia64; then
+        if test ia64 = "$host_cpu"; then
           # On IA64, the linker does run time linking by default, so we don't
           # have to do anything special.
           aix_use_runtimelinking=no
           exp_sym_flag='-Bexport'
-          no_entry_flag=""
+          no_entry_flag=
         else
           aix_use_runtimelinking=no
 
           # Test if we are trying to use run time linking or normal
           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
           case $host_os in aix4.23|aix4.23.*|aix5-9*)
 	    for ld_flag in $LDFLAGS; do
 	      case $ld_flag in
@@ -5996,6 +6469,13 @@
 	        ;;
 	      esac
 	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
 	    ;;
           esac
 
@@ -6014,13 +6494,21 @@
         _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
         _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
         _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+        _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          _LT_TAGVAR(hardcode_direct, $1)=no
+          _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+          ;;
+        esac
 
-        if test "$GXX" = yes; then
+        if test yes = "$GXX"; then
           case $host_os in aix4.012|aix4.012.*)
           # We only want to do this on AIX 4.2 and lower, the check
           # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -6038,64 +6526,84 @@
 	  fi
           esac
           shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
 	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
         else
           # not using gcc
-          if test "$host_cpu" = ia64; then
+          if test ia64 = "$host_cpu"; then
 	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	  # chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
           else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
 	    else
-	      shared_flag='${wl}-bM:SRE'
+	      shared_flag='$wl-bM:SRE'
 	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
           fi
         fi
 
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
         _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
           # Warning - without using the other runtime loading flags (-brtl),
           # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # The "-G" linker flag allows undefined symbols.
+          _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
           _LT_SYS_MODULE_PATH_AIX($1)
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
         else
-          if test "$host_cpu" = ia64; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+          if test ia64 = "$host_cpu"; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
 	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
 	    _LT_SYS_MODULE_PATH_AIX($1)
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
-	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
+	    _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
 	      # We only use this code for GNU lds that support --whole-archive.
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    else
 	      # Exported symbols can be pulled into shared objects from archives
 	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	    fi
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\$, \$%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
           fi
         fi
         ;;
@@ -6105,7 +6613,7 @@
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	  # support --undefined.  This deserves some investigation.  FIXME
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
@@ -6133,57 +6641,58 @@
 	  # Tell ltmain to make .lib files, not .a files.
 	  libext=lib
 	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
+	  shrext_cmds=.dll
 	  # FIXME: Setting linknames here is a bad hack.
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\$.*\\\\\\$/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P($export_symbols); then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
 	  # The linker will not automatically build a static lib if we build a DLL.
 	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 	  # Don't use ranlib
 	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
 	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
 	  ;;
 	*)
 	  # g++
 	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
 	  # as there is no search path for DLLs.
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  _LT_TAGVAR(always_export_symbols, $1)=no
 	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
 	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P($export_symbols); then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	  else
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
@@ -6194,6 +6703,34 @@
         _LT_DARWIN_LINKER_FEATURES($1)
 	;;
 
+      os2*)
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	shrext_cmds=.dll
+	_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^$.*$$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+
       dgux*)
         case $cc_basename in
           ec++*)
@@ -6228,18 +6765,15 @@
         _LT_TAGVAR(ld_shlibs, $1)=yes
         ;;
 
-      gnu*)
-        ;;
-
       haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
         _LT_TAGVAR(link_all_deplibs, $1)=yes
         ;;
 
       hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
         _LT_TAGVAR(hardcode_direct, $1)=yes
         _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
 				             # but as the default
@@ -6251,7 +6785,7 @@
             _LT_TAGVAR(ld_shlibs, $1)=no
             ;;
           aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
@@ -6260,11 +6794,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            if test yes = "$GXX"; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               _LT_TAGVAR(ld_shlibs, $1)=no
@@ -6274,15 +6808,15 @@
         ;;
 
       hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        if test no = "$with_gnu_ld"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
 	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
           case $host_cpu in
             hppa*64*|ia64*)
               ;;
             *)
-	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
               ;;
           esac
         fi
@@ -6308,13 +6842,13 @@
           aCC*)
 	    case $host_cpu in
 	      hppa*64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      ia64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      *)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	    esac
 	    # Commands to make compiler produce verbose output that lists
@@ -6325,20 +6859,20 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
 	        case $host_cpu in
 	          hppa*64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -6353,22 +6887,22 @@
       interix3-9*)
 	_LT_TAGVAR(hardcode_direct, $1)=no
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 	# Instead, shared libraries are loaded at an image base (0x10000000 by
 	# default) and relocated if they conflict, which is a slow very memory
 	# consuming and fragmenting process.  To avoid this, we pick a random,
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -6377,22 +6911,22 @@
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 	    ;;
         esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
         _LT_TAGVAR(inherit_rpath, $1)=yes
         ;;
 
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -6400,8 +6934,8 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
@@ -6410,10 +6944,10 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -6427,59 +6961,59 @@
 	    # earlier do not add the objects themselves.
 	    case `$CC -V 2>&1` in
 	      *"Version 7."*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	      *)  # Version 8.0 or newer
 	        tmp_idyn=
 	        case $host_cpu in
 		  ia64*) tmp_idyn=' -i_dynamic';;
 		esac
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	    esac
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    ;;
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
 	    *pgCC\ 1-5.* | *pgcpp\ 1-5.*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    *) # Version 6 and above use weak symbols
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    esac
 
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
 
 	    runpath_var=LD_RUN_PATH
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -6493,18 +7027,18 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld .*$$/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
 	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+                cat $export_symbols | sed -e "s/$.*$/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
@@ -6512,10 +7046,10 @@
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
@@ -6573,22 +7107,17 @@
         _LT_TAGVAR(ld_shlibs, $1)=yes
 	;;
 
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      openbsd*)
+      openbsd* | bitrig*)
 	if test -f /usr/libexec/ld.so; then
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
 	  fi
 	  output_verbose_link_cmd=func_echo_all
 	else
@@ -6604,9 +7133,9 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/$^()0-9A-Za-z{}$/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
 	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	    # Archives containing C++ object files must be created using
@@ -6624,17 +7153,17 @@
           cxx*)
 	    case $host in
 	      osf3*)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
 	    esac
@@ -6649,21 +7178,21 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/$^.*ld.*$$ .*ld.*$$/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
 	      case $host in
 	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	      esac
 
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	      # Commands to make compiler produce verbose output that lists
@@ -6709,9 +7238,9 @@
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -6719,7 +7248,7 @@
 	      solaris2.0-5 | solaris2.0-5.*) ;;
 	      *)
 		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
+		# but understands '-z linker_flag'.
 	        # Supported since Solaris 2.6 (maybe 2.5.1?)
 		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	        ;;
@@ -6736,30 +7265,30 @@
 	    ;;
           gcx*)
 	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 
 	    # The C++ compiler must be used to create the archive.
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	    ;;
           *)
 	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
 	        # platform.
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/$.*$/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
@@ -6767,11 +7296,11 @@
 	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
 	      case $host_os in
 		solaris2.0-5 | solaris2.0-5.*) ;;
 		*)
-		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 		  ;;
 	      esac
 	    fi
@@ -6780,52 +7309,52 @@
         ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.01.10* | unixware7* | sco3.2v5.0.024*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       case $cc_basename in
         CC*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
       esac
       ;;
 
       sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
+	# Note: We CANNOT use -z defs as we might desire, because we do not
 	# link with -lc, and that would cause any symbols used from libc to
 	# always be unresolved, which means just about no library would
 	# ever link correctly.  If we're not using GNU ld we use -z text
 	# though, which does catch some bad symbols but isn't as heavy-handed
 	# as -z defs.
-	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
 	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
 	_LT_TAGVAR(link_all_deplibs, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
 	runpath_var='LD_RUN_PATH'
 
 	case $cc_basename in
           CC*)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+              '"$_LT_TAGVAR(old_archive_cmds, $1)"
 	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-	      '"$_LT_TAGVAR(reload_cmds, $1)"
+              '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    ;;
 	esac
       ;;
@@ -6856,10 +7385,10 @@
     esac
 
     AC_MSG_RESULT($_LT_TAGVAR(ld_shlibs, $1))
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+    test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
 
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
+    _LT_TAGVAR(GCC, $1)=$GXX
+    _LT_TAGVAR(LD, $1)=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -6886,7 +7415,7 @@
   lt_cv_path_LD=$lt_save_path_LD
   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
 
 AC_LANG_POP
 )# _LT_LANG_CXX_CONFIG
@@ -6908,13 +7437,14 @@
 AC_REQUIRE(_LT_PROG_ECHO_BACKSLASH)
 func_stripname_cnf ()
 {
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  case @S|@2 in
+  .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
   esac
 } # func_stripname_cnf
 )# _LT_FUNC_STRIPNAME_CNF
 
+
 # _LT_SYS_HIDDEN_LIBDEPS(TAGNAME)
 # ---------------------------------
 # Figure out "hidden" library dependencies from verbose
@@ -6998,13 +7528,13 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $prev$p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
 	 prev=$p
 	 continue
        fi
@@ -7020,16 +7550,16 @@
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	     _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
 	   else
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
@@ -7037,9 +7567,9 @@
 	 esac
        else
 	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	   _LT_TAGVAR(postdeps, $1)=$prev$p
 	 else
-	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
 	 fi
        fi
        prev=
@@ -7054,15 +7584,15 @@
 	 continue
        fi
 
-       if test "$pre_test_object_deps_done" = no; then
+       if test no = "$pre_test_object_deps_done"; then
 	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-	   _LT_TAGVAR(predep_objects, $1)="$p"
+	   _LT_TAGVAR(predep_objects, $1)=$p
 	 else
 	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
 	 fi
        else
 	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	   _LT_TAGVAR(postdep_objects, $1)=$p
 	 else
 	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
 	 fi
@@ -7093,51 +7623,6 @@
   _LT_TAGVAR(postdep_objects,$1)=
   _LT_TAGVAR(postdeps,$1)=
   ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 esac
 )
 
@@ -7146,7 +7631,7 @@
 esac
  _LT_TAGVAR(compiler_lib_search_dirs, $1)=
 if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
 fi
 _LT_TAGDECL(, compiler_lib_search_dirs, 1,
     The directories searched by this compiler when creating a shared library)
@@ -7166,10 +7651,10 @@
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_F77_CONFIG,
 AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
   _lt_disable_F77=yes
 fi
 
@@ -7206,7 +7691,7 @@
 # the F77 compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
@@ -7228,7 +7713,7 @@
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
+  lt_save_CC=$CC
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${F77-"f77"}
@@ -7242,21 +7727,25 @@
     AC_MSG_RESULT($can_build_shared)
 
     AC_MSG_CHECKING(whether to build shared libraries)
-    test "$can_build_shared" = "no" && enable_shared=no
+    test no = "$can_build_shared" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
-        test "$enable_shared" = yes && enable_static=no
+        test yes = "$enable_shared" && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix4-9*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
 	fi
         ;;
     esac
@@ -7264,11 +7753,11 @@
 
     AC_MSG_CHECKING(whether to build static libraries)
     # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
+    test yes = "$enable_shared" || enable_static=yes
     AC_MSG_RESULT($enable_static)
 
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
+    _LT_TAGVAR(GCC, $1)=$G77
+    _LT_TAGVAR(LD, $1)=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -7285,9 +7774,9 @@
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-  CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
 
 AC_LANG_POP
 )# _LT_LANG_F77_CONFIG
@@ -7297,11 +7786,11 @@
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_FC_CONFIG,
 AC_LANG_PUSH(Fortran)
 
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
   _lt_disable_FC=yes
 fi
 
@@ -7338,7 +7827,7 @@
 # the FC compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
@@ -7360,7 +7849,7 @@
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
+  lt_save_CC=$CC
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
@@ -7376,21 +7865,25 @@
     AC_MSG_RESULT($can_build_shared)
 
     AC_MSG_CHECKING(whether to build shared libraries)
-    test "$can_build_shared" = "no" && enable_shared=no
+    test no = "$can_build_shared" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
-        test "$enable_shared" = yes && enable_static=no
+        test yes = "$enable_shared" && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix4-9*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
 	fi
         ;;
     esac
@@ -7398,11 +7891,11 @@
 
     AC_MSG_CHECKING(whether to build static libraries)
     # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
+    test yes = "$enable_shared" || enable_static=yes
     AC_MSG_RESULT($enable_static)
 
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
+    _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+    _LT_TAGVAR(LD, $1)=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -7422,7 +7915,7 @@
   GCC=$lt_save_GCC
   CC=$lt_save_CC
   CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
 
 AC_LANG_POP
 )# _LT_LANG_FC_CONFIG
@@ -7432,7 +7925,7 @@
 # --------------------------
 # Ensure that the configuration variables for the GNU Java Compiler compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_GCJ_CONFIG,
 AC_REQUIRE(LT_PROG_GCJ)dnl
 AC_LANG_SAVE
@@ -7466,7 +7959,7 @@
 CFLAGS=$GCJFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
 _LT_CC_BASENAME($compiler)
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -7503,7 +7996,7 @@
 # --------------------------
 # Ensure that the configuration variables for the GNU Go compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_GO_CONFIG,
 AC_REQUIRE(LT_PROG_GO)dnl
 AC_LANG_SAVE
@@ -7537,7 +8030,7 @@
 CFLAGS=$GOFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
 _LT_CC_BASENAME($compiler)
 
 # Go did not exist at the time GCC didn't implicitly link libc in.
@@ -7574,7 +8067,7 @@
 # -------------------------
 # Ensure that the configuration variables for the Windows resource compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun(_LT_LANG_RC_CONFIG,
 AC_REQUIRE(LT_PROG_RC)dnl
 AC_LANG_SAVE
@@ -7590,7 +8083,7 @@
 lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
 # Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_TAG_COMPILER
@@ -7600,7 +8093,7 @@
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
 lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=
@@ -7629,7 +8122,7 @@
 m4_ifdef(AC_PROG_GCJ, AC_PROG_GCJ,
   m4_ifdef(AM_PROG_GCJ, AM_PROG_GCJ,
     AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
       AC_SUBST(GCJFLAGS)))dnl
 )
 
@@ -7740,7 +8233,7 @@
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
+  test ! -f "$lt_ac_sed" && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -7757,9 +8250,9 @@
     $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
     cmp -s conftest.out conftest.nl || break
     # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
+    test 10 -lt "$lt_ac_count" && break
     lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
+    if test "$lt_ac_count" -gt "$lt_ac_max"; then
       lt_ac_max=$lt_ac_count
       lt_cv_path_SED=$lt_ac_sed
     fi
@@ -7783,27 +8276,7 @@
 # Find out whether the shell is Bourne or XSI compatible,
 # or has some other useful features.
 m4_defun(_LT_CHECK_SHELL_FEATURES,
-AC_MSG_CHECKING(whether the shell understands some XSI constructs)
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT($xsi_shell)
-_LT_CONFIG_LIBTOOL_INIT(xsi_shell='$xsi_shell')
-
-AC_MSG_CHECKING(whether the shell understands "+=")
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT($lt_shell_append)
-_LT_CONFIG_LIBTOOL_INIT(lt_shell_append='$lt_shell_append')
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
   lt_unset=false
@@ -7827,102 +8300,9 @@
 )# _LT_CHECK_SHELL_FEATURES
 
 
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun(_LT_PROG_FUNCTION_REPLACE,
-dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts($2, $, \\, ^, \\\1)
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-)
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun(_LT_PROG_REPLACE_SHELLFNS,
-if test x"$xsi_shell" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE(func_dirname, dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac)
-
-  _LT_PROG_FUNCTION_REPLACE(func_basename, dnl
-    func_basename_result="${1##*/}")
-
-  _LT_PROG_FUNCTION_REPLACE(func_dirname_and_basename, dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-    func_basename_result="${1##*/}")
-
-  _LT_PROG_FUNCTION_REPLACE(func_stripname, dnl
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary parameter first.
-    func_stripname_result=${3}
-    func_stripname_result=${func_stripname_result#"${1}"}
-    func_stripname_result=${func_stripname_result%"${2}"})
-
-  _LT_PROG_FUNCTION_REPLACE(func_split_long_opt, dnl
-    func_split_long_opt_name=${1%%=*}
-    func_split_long_opt_arg=${1#*=})
-
-  _LT_PROG_FUNCTION_REPLACE(func_split_short_opt, dnl
-    func_split_short_opt_arg=${1#??}
-    func_split_short_opt_name=${1%"$func_split_short_opt_arg"})
-
-  _LT_PROG_FUNCTION_REPLACE(func_lo2o, dnl
-    case ${1} in
-      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-      *)    func_lo2o_result=${1} ;;
-    esac)
-
-  _LT_PROG_FUNCTION_REPLACE(func_xform,     func_xform_result=${1%.*}.lo)
-
-  _LT_PROG_FUNCTION_REPLACE(func_arith,     func_arith_result=$(( $* )))
-
-  _LT_PROG_FUNCTION_REPLACE(func_len,     func_len_result=${#1})
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE(func_append,     eval "${1}+=\\${2}")
-
-  _LT_PROG_FUNCTION_REPLACE(func_append_quoted, dnl
-    func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
-    eval "${1}+=\\\\ \\$func_quote_for_eval_result")
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append $a-zA-Z_\{1,\}$ "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append $a-zA-Z_\{1,\}$ "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  AC_MSG_WARN(Unable to substitute extended shell functions in $ofile)
-fi
-)
-
 # _LT_PATH_CONVERSION_FUNCTIONS
 # -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
 # func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
 # for certain cross-compile configurations and native mingw.
 m4_defun(_LT_PATH_CONVERSION_FUNCTIONS,

atmos-2.97.9.tar.gz/third-party/yalpa/m4/ltoptions.m4 -> atmos-2.97.11.tar.gz/third-party/yalpa/m4/ltoptions.m4 Changed

@@ -1,14 +1,14 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
+#   Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+#   Foundation, Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN(LTOPTIONS_VERSION, m4_if(1))
@@ -29,7 +29,7 @@
 m4_define(_LT_MANGLE_OPTION($1, $2))dnl
 m4_ifdef(_LT_MANGLE_DEFUN($1, $2),
         _LT_MANGLE_DEFUN($1, $2),
-    m4_warning(Unknown $1 option `$2'))dnl
+    m4_warning(Unknown $1 option '$2'))dnl
 )
 
 
@@ -75,13 +75,15 @@
   dnl
   dnl If no reference was made to various pairs of opposing options, then
   dnl we run the default mode handler for the pair.  For example, if neither
-  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
   dnl archives by default:
   _LT_UNLESS_OPTIONS(LT_INIT, shared disable-shared, _LT_ENABLE_SHARED)
   _LT_UNLESS_OPTIONS(LT_INIT, static disable-static, _LT_ENABLE_STATIC)
   _LT_UNLESS_OPTIONS(LT_INIT, pic-only no-pic, _LT_WITH_PIC)
   _LT_UNLESS_OPTIONS(LT_INIT, fast-install disable-fast-install,
-  		   _LT_ENABLE_FAST_INSTALL)
+		   _LT_ENABLE_FAST_INSTALL)
+  _LT_UNLESS_OPTIONS(LT_INIT, aix-soname=aix aix-soname=both aix-soname=svr4,
+		   _LT_WITH_AIX_SONAME(aix))
   )
 )# _LT_SET_OPTIONS
 
@@ -112,7 +114,7 @@
 _LT_SET_OPTION(LT_INIT, dlopen)
 AC_DIAGNOSE(obsolete,
 $0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.)
+put the 'dlopen' option into LT_INIT's first parameter.)
 )
 
 dnl aclocal-1.4 backwards compatibility:
@@ -148,7 +150,7 @@
 _LT_SET_OPTION(LT_INIT, win32-dll)
 AC_DIAGNOSE(obsolete,
 $0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.)
+put the 'win32-dll' option into LT_INIT's first parameter.)
 )
 
 dnl aclocal-1.4 backwards compatibility:
@@ -157,9 +159,9 @@
 
 # _LT_ENABLE_SHARED(DEFAULT)
 # ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
 m4_define(_LT_ENABLE_SHARED,
 m4_define(_LT_ENABLE_SHARED_DEFAULT, m4_if($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
@@ -172,14 +174,14 @@
     *)
       enable_shared=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac,
     enable_shared=_LT_ENABLE_SHARED_DEFAULT)
@@ -211,9 +213,9 @@
 
 # _LT_ENABLE_STATIC(DEFAULT)
 # ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
 m4_define(_LT_ENABLE_STATIC,
 m4_define(_LT_ENABLE_STATIC_DEFAULT, m4_if($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
@@ -226,14 +228,14 @@
     *)
      enable_static=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac,
     enable_static=_LT_ENABLE_STATIC_DEFAULT)
@@ -265,9 +267,9 @@
 
 # _LT_ENABLE_FAST_INSTALL(DEFAULT)
 # ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
 m4_define(_LT_ENABLE_FAST_INSTALL,
 m4_define(_LT_ENABLE_FAST_INSTALL_DEFAULT, m4_if($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
@@ -280,14 +282,14 @@
     *)
       enable_fast_install=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac,
     enable_fast_install=_LT_ENABLE_FAST_INSTALL_DEFAULT)
@@ -304,14 +306,14 @@
 _LT_SET_OPTION(LT_INIT, m4_if($1, no, disable-)fast-install)
 AC_DIAGNOSE(obsolete,
 $0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.)
+the 'fast-install' option into LT_INIT's first parameter.)
 )
 
 AU_DEFUN(AC_DISABLE_FAST_INSTALL,
 _LT_SET_OPTION(LT_INIT, disable-fast-install)
 AC_DIAGNOSE(obsolete,
 $0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.)
+the 'disable-fast-install' option into LT_INIT's first parameter.)
 )
 
 dnl aclocal-1.4 backwards compatibility:
@@ -319,11 +321,64 @@
 dnl AC_DEFUN(AM_DISABLE_FAST_INSTALL, )
 
 
+# _LT_WITH_AIX_SONAME(DEFAULT)
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'.  If omitted, it defaults to `aix'.
+m4_define(_LT_WITH_AIX_SONAME,
+m4_define(_LT_WITH_AIX_SONAME_DEFAULT, m4_if($1, svr4, svr4, m4_if($1, both, both, aix)))dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix5-9*,yes)
+  AC_MSG_CHECKING(which variant of shared library versioning to provide)
+  AC_ARG_WITH(aix-soname,
+    AS_HELP_STRING(--with-aix-soname=aix|svr4|both,
+      shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=_LT_WITH_AIX_SONAME_DEFAULT@:>@.),
+    case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      AC_MSG_ERROR(Unknown argument to --with-aix-soname)
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname,
+    AC_CACHE_VAL(lt_cv_with_aix_soname,
+      lt_cv_with_aix_soname=_LT_WITH_AIX_SONAME_DEFAULT)
+    with_aix_soname=$lt_cv_with_aix_soname)
+  AC_MSG_RESULT($with_aix_soname)
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+_LT_DECL(, shared_archive_member_spec, 0,
+    Shared archive member basename, for filename based shared library versioning on AIX)dnl
+)# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE(LT_INIT, aix-soname=aix, _LT_WITH_AIX_SONAME(aix))
+LT_OPTION_DEFINE(LT_INIT, aix-soname=both, _LT_WITH_AIX_SONAME(both))
+LT_OPTION_DEFINE(LT_INIT, aix-soname=svr4, _LT_WITH_AIX_SONAME(svr4))
+
+
 # _LT_WITH_PIC(MODE)
 # --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
 # LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'.  If omitted, it defaults to 'both'.
 m4_define(_LT_WITH_PIC,
 AC_ARG_WITH(pic,
     AS_HELP_STRING(--with-pic@<:@=PKGS@:>@,
@@ -334,19 +389,17 @@
     *)
       pic_mode=default
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac,
-    pic_mode=default)
-
-test -z "$pic_mode" && pic_mode=m4_default($1, default)
+    pic_mode=m4_default($1, default))
 
 _LT_DECL(, pic_mode, 0, What type of objects to build)dnl
 )# _LT_WITH_PIC
@@ -359,7 +412,7 @@
 _LT_SET_OPTION(LT_INIT, pic-only)
 AC_DIAGNOSE(obsolete,
 $0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.)
+put the 'pic-only' option into LT_INIT's first parameter.)
 )
 
 dnl aclocal-1.4 backwards compatibility:

atmos-2.97.9.tar.gz/third-party/yalpa/m4/ltsugar.m4 -> atmos-2.97.11.tar.gz/third-party/yalpa/m4/ltsugar.m4 Changed

@@ -1,6 +1,7 @@
 # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
 # Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
@@ -33,7 +34,7 @@
 # ------------
 # Manipulate m4 lists.
 # These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
 m4_define(lt_car, $1)
 m4_define(lt_cdr,
 m4_if($#, 0, m4_fatal($0: cannot be called without arguments),
@@ -44,7 +45,7 @@
 
 # lt_append(MACRO-NAME, STRING, SEPARATOR)
 # ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
 # Note that neither SEPARATOR nor STRING are expanded; they are appended
 # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
 # No SEPARATOR is output if MACRO-NAME was previously undefined (different

atmos-2.97.9.tar.gz/third-party/yalpa/m4/ltversion.m4 -> atmos-2.97.11.tar.gz/third-party/yalpa/m4/ltversion.m4 Changed

atmos-2.97.9.tar.gz/third-party/yalpa/m4/lt~obsolete.m4 -> atmos-2.97.11.tar.gz/third-party/yalpa/m4/lt~obsolete.m4 Changed

@@ -1,6 +1,7 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+#   Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
@@ -11,7 +12,7 @@
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
 # which have later been changed to m4_define as they aren't part of the
 # exported API, or moved to Autoconf or Automake where they belong.
 #
@@ -25,7 +26,7 @@
 # included after everything else.  This provides aclocal with the
 # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
 # because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
 #
 # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
 # Yes, that means every name once taken will need to remain here until

atmos-2.97.9.tar.gz/third-party/yalpa/missing -> atmos-2.97.11.tar.gz/third-party/yalpa/missing Changed

atmos-2.97.9.tar.gz/third-party/yalpa/src/Makefile.am -> atmos-2.97.11.tar.gz/third-party/yalpa/src/Makefile.am Changed

atmos-2.97.9.tar.gz/third-party/yalpa/src/Makefile.in -> atmos-2.97.11.tar.gz/third-party/yalpa/src/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -79,8 +89,6 @@
 build_triplet = @build@
 host_triplet = @host@
 subdir = src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -88,6 +96,7 @@
 	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/yalpa/yalpa_config.h
 CONFIG_CLEAN_FILES =
@@ -192,6 +201,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -236,6 +246,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -314,7 +325,7 @@
 top_srcdir = @top_srcdir@
 lib_LTLIBRARIES = libyalpa.la
 libyalpa_la_SOURCES = sidtime.cpp sun.cpp io.cpp moon.cpp
-libyalpa_la_CPPFLAGS = -I @abs_top_srcdir@/include
+libyalpa_la_CPPFLAGS = -I @abs_top_srcdir@/include -std=c++98
 libyalpa_la_LDFLAGS = -version-info 0:1:0
 all: all-am
 
@@ -332,7 +343,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -661,6 +671,8 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags tags-am uninstall uninstall-am uninstall-libLTLIBRARIES
 
+.PRECIOUS: Makefile
+
 
 # Tell versions 3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

atmos-2.97.9.tar.gz/third-party/yalpa/test/Makefile.am -> atmos-2.97.11.tar.gz/third-party/yalpa/test/Makefile.am Changed

atmos-2.97.9.tar.gz/third-party/yalpa/test/Makefile.in -> atmos-2.97.11.tar.gz/third-party/yalpa/test/Makefile.in Changed

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -83,8 +93,6 @@
 	sidtime_test$(EXEEXT) moon_test$(EXEEXT) \
 	distance_test$(EXEEXT)
 subdir = test
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -92,14 +100,16 @@
 	$(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/yalpa/yalpa_config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)"
 PROGRAMS = $(bin_PROGRAMS)
-am_convert_OBJECTS = convert-convert.$(OBJEXT)
+am_convert_OBJECTS = convert.$(OBJEXT)
 convert_OBJECTS = $(am_convert_OBJECTS)
+convert_LDADD = $(LDADD)
 convert_DEPENDENCIES = @abs_top_builddir@/src/libyalpa.la
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
@@ -113,11 +123,13 @@
 equatorial_test_OBJECTS = $(am_equatorial_test_OBJECTS)
 equatorial_test_LDADD = $(LDADD)
 equatorial_test_DEPENDENCIES = @abs_top_builddir@/src/libyalpa.la
-am_io_OBJECTS = io-io.$(OBJEXT)
+am_io_OBJECTS = io.$(OBJEXT)
 io_OBJECTS = $(am_io_OBJECTS)
+io_LDADD = $(LDADD)
 io_DEPENDENCIES = @abs_top_builddir@/src/libyalpa.la
-am_julian_OBJECTS = julian-julian.$(OBJEXT)
+am_julian_OBJECTS = julian.$(OBJEXT)
 julian_OBJECTS = $(am_julian_OBJECTS)
+julian_LDADD = $(LDADD)
 julian_DEPENDENCIES = @abs_top_builddir@/src/libyalpa.la
 am_julian_test_OBJECTS = julian_test.$(OBJEXT)
 julian_test_OBJECTS = $(am_julian_test_OBJECTS)
@@ -131,8 +143,9 @@
 sidtime_test_OBJECTS = $(am_sidtime_test_OBJECTS)
 sidtime_test_LDADD = $(LDADD)
 sidtime_test_DEPENDENCIES = @abs_top_builddir@/src/libyalpa.la
-am_sun_OBJECTS = sun-sun.$(OBJEXT)
+am_sun_OBJECTS = sun.$(OBJEXT)
 sun_OBJECTS = $(am_sun_OBJECTS)
+sun_LDADD = $(LDADD)
 sun_DEPENDENCIES = @abs_top_builddir@/src/libyalpa.la
 AM_V_P = $(am__v_P_@AM_V@)
 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
@@ -200,6 +213,7 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -244,6 +258,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -321,23 +336,15 @@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 convert_SOURCES = convert.cpp
-convert_CPPFLAGS = -I @abs_top_srcdir@/include
-convert_LDADD = @abs_top_builddir@/src/libyalpa.la
 julian_SOURCES = julian.cpp
-julian_CPPFLAGS = -I @abs_top_srcdir@/include
-julian_LDADD = @abs_top_builddir@/src/libyalpa.la
 moon_test_SOURCES = moon_test.cpp
 sun_SOURCES = sun.cpp
-sun_CPPFLAGS = -I @abs_top_srcdir@/include
-sun_LDADD = @abs_top_builddir@/src/libyalpa.la
 io_SOURCES = io.cpp
-io_CPPFLAGS = -I @abs_top_srcdir@/include
-io_LDADD = @abs_top_builddir@/src/libyalpa.la
 equatorial_test_SOURCES = equatorial_test.cpp
 julian_test_SOURCES = julian_test.cpp
 sidtime_test_SOURCES = sidtime_test.cpp
 distance_test_SOURCES = distance_test.cpp
-AM_CPPFLAGS = -I @abs_top_srcdir@/include
+AM_CPPFLAGS = -I @abs_top_srcdir@/include -std=c++98
 LDADD = @abs_top_builddir@/src/libyalpa.la
 all: all-am
 
@@ -355,7 +362,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu test/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -465,15 +471,15 @@
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/convert-convert.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/convert.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/distance_test.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/equatorial_test.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io-io.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/julian-julian.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/julian.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/julian_test.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/moon_test.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sidtime_test.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sun-sun.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sun.Po@am__quote@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -496,62 +502,6 @@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
 
-convert-convert.o: convert.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(convert_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT convert-convert.o -MD -MP -MF $(DEPDIR)/convert-convert.Tpo -c -o convert-convert.o `test -f 'convert.cpp' || echo '$(srcdir)/'`convert.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/convert-convert.Tpo $(DEPDIR)/convert-convert.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='convert.cpp' object='convert-convert.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(convert_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o convert-convert.o `test -f 'convert.cpp' || echo '$(srcdir)/'`convert.cpp
-
-convert-convert.obj: convert.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(convert_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT convert-convert.obj -MD -MP -MF $(DEPDIR)/convert-convert.Tpo -c -o convert-convert.obj `if test -f 'convert.cpp'; then $(CYGPATH_W) 'convert.cpp'; else $(CYGPATH_W) '$(srcdir)/convert.cpp'; fi`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/convert-convert.Tpo $(DEPDIR)/convert-convert.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='convert.cpp' object='convert-convert.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(convert_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o convert-convert.obj `if test -f 'convert.cpp'; then $(CYGPATH_W) 'convert.cpp'; else $(CYGPATH_W) '$(srcdir)/convert.cpp'; fi`
-
-io-io.o: io.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(io_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT io-io.o -MD -MP -MF $(DEPDIR)/io-io.Tpo -c -o io-io.o `test -f 'io.cpp' || echo '$(srcdir)/'`io.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/io-io.Tpo $(DEPDIR)/io-io.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='io.cpp' object='io-io.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(io_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o io-io.o `test -f 'io.cpp' || echo '$(srcdir)/'`io.cpp
-
-io-io.obj: io.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(io_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT io-io.obj -MD -MP -MF $(DEPDIR)/io-io.Tpo -c -o io-io.obj `if test -f 'io.cpp'; then $(CYGPATH_W) 'io.cpp'; else $(CYGPATH_W) '$(srcdir)/io.cpp'; fi`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/io-io.Tpo $(DEPDIR)/io-io.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='io.cpp' object='io-io.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(io_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o io-io.obj `if test -f 'io.cpp'; then $(CYGPATH_W) 'io.cpp'; else $(CYGPATH_W) '$(srcdir)/io.cpp'; fi`
-
-julian-julian.o: julian.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(julian_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT julian-julian.o -MD -MP -MF $(DEPDIR)/julian-julian.Tpo -c -o julian-julian.o `test -f 'julian.cpp' || echo '$(srcdir)/'`julian.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/julian-julian.Tpo $(DEPDIR)/julian-julian.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='julian.cpp' object='julian-julian.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(julian_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o julian-julian.o `test -f 'julian.cpp' || echo '$(srcdir)/'`julian.cpp
-
-julian-julian.obj: julian.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(julian_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT julian-julian.obj -MD -MP -MF $(DEPDIR)/julian-julian.Tpo -c -o julian-julian.obj `if test -f 'julian.cpp'; then $(CYGPATH_W) 'julian.cpp'; else $(CYGPATH_W) '$(srcdir)/julian.cpp'; fi`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/julian-julian.Tpo $(DEPDIR)/julian-julian.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='julian.cpp' object='julian-julian.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(julian_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o julian-julian.obj `if test -f 'julian.cpp'; then $(CYGPATH_W) 'julian.cpp'; else $(CYGPATH_W) '$(srcdir)/julian.cpp'; fi`
-
-sun-sun.o: sun.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sun_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sun-sun.o -MD -MP -MF $(DEPDIR)/sun-sun.Tpo -c -o sun-sun.o `test -f 'sun.cpp' || echo '$(srcdir)/'`sun.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/sun-sun.Tpo $(DEPDIR)/sun-sun.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='sun.cpp' object='sun-sun.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sun_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sun-sun.o `test -f 'sun.cpp' || echo '$(srcdir)/'`sun.cpp
-
-sun-sun.obj: sun.cpp
-@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sun_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT sun-sun.obj -MD -MP -MF $(DEPDIR)/sun-sun.Tpo -c -o sun-sun.obj `if test -f 'sun.cpp'; then $(CYGPATH_W) 'sun.cpp'; else $(CYGPATH_W) '$(srcdir)/sun.cpp'; fi`
-@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/sun-sun.Tpo $(DEPDIR)/sun-sun.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='sun.cpp' object='sun-sun.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sun_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o sun-sun.obj `if test -f 'sun.cpp'; then $(CYGPATH_W) 'sun.cpp'; else $(CYGPATH_W) '$(srcdir)/sun.cpp'; fi`
-
 mostlyclean-libtool:
 	-rm -f *.lo
 
@@ -743,6 +693,8 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS
 
+.PRECIOUS: Makefile
+
 
 install:
 install-exec:

Overview

Request 117 (accepted)

Request History